..Kev Posted August 23, 2015 Author Report Posted August 23, 2015 Basic head rest shape carved / rasped / scraped / sanded into shape. Happy with my top and bottom line but, Marc was correct when he said that people new to this tend to leave too much material.. There will definitely be more material coming off of it. 2 Quote
..Kev Posted August 24, 2015 Author Report Posted August 24, 2015 Just lots more shaping on the head rest and horns tonight.. I can grab a picture if someone really wants one but, there's really not a bunch to see.. Quote
shaneymack Posted August 24, 2015 Report Posted August 24, 2015 Just lots more shaping on the head rest and horns tonight.. I can grab a picture if someone really wants one but, there's really not a bunch to see.. Pic please Quote
..Kev Posted August 24, 2015 Author Report Posted August 24, 2015 Here it is.. Super slow process at this stage. 1 Quote
Woodenskye Posted August 24, 2015 Report Posted August 24, 2015 Kev hopefully you will be done and rocking by opening kickoff for your hawks! Quote
..Kev Posted August 24, 2015 Author Report Posted August 24, 2015 Kev hopefully you will be done and rocking by opening kickoff for your hawks!Back on the road for work again here in a couple weeks so, will be lucky to get it done by Christmas.. I feel good with where it's at tho so, it'll get done. 1 Quote
shaneymack Posted August 24, 2015 Report Posted August 24, 2015 Here it is.. Super slow process at this stage. I love it. The horns are cool. 1 Quote
..Kev Posted August 24, 2015 Author Report Posted August 24, 2015 An entire day of carving, rasping, scraping, and sanding and I think the head rest is getting close. For you eagle eyes out there, there's a little chip out of the lower left corner that I'll have to fix after it's glued in place. Quote
Mick S Posted August 25, 2015 Report Posted August 25, 2015 That's the shape I'm going for when I build one. Love that flair with a cove. Quote
davewyo Posted August 25, 2015 Report Posted August 25, 2015 No reason not to take your time...unless there's something we don't know. Quote
..Kev Posted August 25, 2015 Author Report Posted August 25, 2015 (edited) Just trying to be meticulous DaveJust because I really wanted to see what that rear leg joint looked like, I took a bit of time to go ahead and sculpt the top of it in.. Pretty cool joint! Edited August 25, 2015 by TIODS Quote
Mick S Posted August 25, 2015 Report Posted August 25, 2015 Jet trying to be meticulous DaveJust because I really wanted to see what that rear leg joint looked like, I took a bit of time to go ahead and sculpt the top of it in.. Pretty cool joint! Agreed. The guy was a genius! Quote
Janello Posted August 25, 2015 Report Posted August 25, 2015 Lookin awesome. Such neat leg joinery. 1 Quote
shaneymack Posted August 25, 2015 Report Posted August 25, 2015 What a great looking joint. You are doing a fantastic job Kev! 1 Quote
..Kev Posted August 26, 2015 Author Report Posted August 26, 2015 Thanks Shane!Just another day of sculpting, rasping, scraping, and sanding.. Starting to take shape! Only the second time I've actually used the hold fasts on the end of my table but, they sure came in handy today! Quote
..Kev Posted August 26, 2015 Author Report Posted August 26, 2015 Felt good enough about the general shaping to go ahead and put the arms on. Will be another couple days of sculpting and sanding before the spindles go in and I start on the rockers. Quote
..Kev Posted August 26, 2015 Author Report Posted August 26, 2015 Wow wow wow! Beautiful job, Kev!Thanks Micks Quote
..Kev Posted August 26, 2015 Author Report Posted August 26, 2015 Got the arms out of clamps early this morning and starting working the joint. Lots more sanding and scraping to go.. Shooting for spindle install later tonight or tomorrow. Quote
Coop Posted August 26, 2015 Report Posted August 26, 2015 I would have had to use two cans of bondo to get joints that tight. Heck of a job Kev! 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.