Recommended Posts

Posted

Going to try and get the screws in this bad boy today..  Then, I'll be taking a bit of time away from the chair to get some other projects done.

Setting up to put in a DC system.  To do it, I have a bunch of rearranging that I have to do not just in my shop but, the garage and storage rooms as well.  I'll do another shop tour when everything is in place and ready for the new DC unit.

Posted

Going to try and get the screws in this bad boy today..  Then, I'll be taking a bit of time away from the chair to get some other projects done.

Setting up to put in a DC system.  To do it, I have a bunch of rearranging that I have to do not just in my shop but, the garage and storage rooms as well.  I'll do another shop tour when everything is in place and ready for the new DC unit.

Yes! Another shop tour! I look forward to this. You got the bomb setup, tools and shop!
  • Like 1
Posted

Thanks Shane, I'm happy with it.  There are many here with much nicer shops for sure!  I wish some of them would post tours because it helps all the rest of us gleen ideas for our own shops.

Legs are on!

 

 

Test Drive.. Had a little help from my son today..

 

Posted

Sweet progress man.

 That's a bummer about the project pack.  I agree that if they take on the responsibly of providing "hand picked lumber" specifically for that package,  it's on them to ensure they supply usable lumber. 

From watching the videos to this point,  how have you found the actual process and work compared to your expectation? 

Posted

Sweet progress man.

 That's a bummer about the project pack.  I agree that if they take on the responsibly of providing "hand picked lumber" specifically for that package,  it's on them to ensure they supply usable lumber. 

From watching the videos to this point,  how have you found the actual process and work compared to your expectation? 

Marc is pretty spot on with the videos..  A couple of times I had to pay attention to his orientation of the boards because he didn't explain it but, the information is there.  Just don't go off willy nilly and you'll be fine.

Posted

If a board wasn't wide enough to yield a full cut on both sides, there will be some wane...it's the outermost of the tree.  Bark may be present, but usually it's fallen off and you'll be looking at cambium.

Thanks.

Posted

Time for the arms..

 

Stock milled and tapered in the front.  I let the wife pick out the grain pattern she wanted so, there's some extra marks I don't need

 

 

Lots of layout and fitting here.  Marc explains and shows it well but, take your time and pay attention!  Trickiest part of the build so far IMO.  Here's the dry fit.

 

Posted

Going to try and get the screws in this bad boy today..  Then, I'll be taking a bit of time away from the chair to get some other projects done.

Setting up to put in a DC system.  To do it, I have a bunch of rearranging that I have to do not just in my shop but, the garage and storage rooms as well.  I'll do another shop tour when everything is in place and ready for the new DC unit.

Wow, the chair really looks great.  I do have a question though....Do you every sleep? 

  • Like 1
Posted

Wow, the chair really looks great.  I do have a question though....Do you every sleep? 

8 hours a night!

I will admit it's nice to have lots of shop time!

Posted

How many hours have you put into this chair so far Kev?

No clue to be honest Shane..  I guess I should have kept track..

 

Burning a bit of the midnight oil but, got the basic sculpting on the arms complete and the screws in.  Should have gotten a better picture but, it's late.

 

Posted

That looks great, Kev! I doubt that I'm too far behind you on this build - well after the dresser, bookcase, table and chairs... But it's definitely a bucket list item.  After all, I have to make something for myself now and then!

 

  • Like 1
Posted

You know what I hate? Kev just finished a long session of sculpting, and thete isn't a speck of dust to be seen in the photo. Nice work, Kev! This chair will be outstanding.

Sculpting was done on my bench at the other end of the shop..  Believe me, there's a mess.

Posted

You know what I hate? Kev just finished a long session of sculpting, and there isn't a speck of dust to be seen in the photo. Nice work, Kev! This chair will be outstanding.

I totaly agree. I sharpened two pencils and spent an hour and a half with the shop vac, cleaning up?

  • Like 1
Posted

I totaly agree. I sharpened two pencils and spent an hour and a half with the shop vac, cleaning up?

I'm glad I didn't have anything to spit on my monitor when I read this!! 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   0 Members, 0 Anonymous, 54 Guests (See full list)

    • There are no registered users currently online
  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined