N00b-in-training Posted August 16, 2015 Report Posted August 16, 2015 I have finally finished my first build from rough dimensioned lumber. 10 years ago my father cut down several trees right when my oldest was born, (Ash, Walnut, Red Oak, and Cherry) he had it sawn into dimensional lumber and stickered it in his barn. I didn’t realize it but after visiting home this past winter I found the lumber still stickered in the top of the barn, obviously very well dried at this point. After finally finishing my shop build, the wife requested bar stools as the first project for our kitchen bar counter. She wanted them to be black and dark brown to match her décor, I decided to use the ash so I could dye it as she wanted without crying over dyeing walnut. Being a newbie, I don’t think I was ready for the complexity of stools with 5 degree compound angle legs but I’m finally done. I used mortise and tenons for the stretchers, cut on the table saw and a hollow chisel mortiser (if I ever have to cut angled M&T joints again I’ll buy a Domino!). Cut buttons to attached the seat to the legs. I considered saddling the seat but decided I just wanted to get the project done and move on to the next one.Finish:Seat – 2 coats of Solar Lux American Walnut Dye (although the color came out a little redder than planned)Spray Shellac wash coatBehlen Pore-O-Pac grain filler dyed with the Solar Lux1 additional coat of dye3 coats of Watco Semi-Gloss spray lacquerLegs – 2 coats of Solar Lux Jet Black DyeSpray Shellac3 coats of Watco Semi-Gloss spray lacquerAll in all, I’m pretty happy with how they turned out. Learned more about what to do different next time than what I did right. Haha. Thanks to all who answered questions along the way! 1 Quote
Vyrolan Posted August 16, 2015 Report Posted August 16, 2015 They look good. I like the finish with the black bases. A brave first project! Well done. Quote
Mick S Posted August 16, 2015 Report Posted August 16, 2015 Nice job! I'm going to try some of that Solar Lux black dye on some of the trim of my current project. Quote
RichardA Posted August 16, 2015 Report Posted August 16, 2015 I like'em! I like these also. That's probably because I made'em. 1 Quote
mat60 Posted August 16, 2015 Report Posted August 16, 2015 Thay look great guys...Nice finish also Noob. Quote
shaneymack Posted August 16, 2015 Report Posted August 16, 2015 Looks great noob. Fantastic job for first project! Quote
..Kev Posted August 16, 2015 Report Posted August 16, 2015 Super job! Much to be proud of! They will be passed on for many generations! Quote
wtnhighlander Posted August 17, 2015 Report Posted August 17, 2015 Those look great! Don't mention its your first project like this, no one would ever know. Quote
woodbutcher74 Posted August 17, 2015 Report Posted August 17, 2015 Project turned out great ! Glad you decided to put some of the black dye on your stools. Quote
N00b-in-training Posted August 17, 2015 Author Report Posted August 17, 2015 Thanks all. A couple of small projects for the wife coming up and then my office desk. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.