JosephThomas Posted October 24, 2015 Report Posted October 24, 2015 Bought my first jointer this morning, a Grizzly G0654. It ran great at the guy's house, but I'm sure the ride home whacked everything out of alignment. If anyone has any experience getting this particular jointer set-up, has helpful pointers, or knows of good online resources, please comment and let me know. I'll mostly be relying on youtube otherwise... Wish me luck! Quote
Brendon_t Posted October 24, 2015 Report Posted October 24, 2015 (edited) Marc has 2 videos on the free site for jointer setup. Search it on youtubeas for the car ride, it shouldn't have knocked it all to hell. Yes you should go through the setup process but it shouldn't get all that whacky. Edited October 24, 2015 by Brendon_t 1 Quote
Coop Posted October 24, 2015 Report Posted October 24, 2015 Congrats on your new jointer.+1 what Brendon said Quote
wtnhighlander Posted October 24, 2015 Report Posted October 24, 2015 Nice buy! I look forward to upgrading my jointer one of these days, you make me jealous. Congrats! Quote
JosephThomas Posted October 24, 2015 Author Report Posted October 24, 2015 We had to transport it lying down in a trailer (it's a long story), otherwise I wouldn't be worried. I watched one of Marc's videos earlier this year, that does sound like a good place to start. Thanks guys! Quote
Sac Posted October 24, 2015 Report Posted October 24, 2015 As long as it was strapped down, and wasn't sliding all over the place, it should be fine. Run a few boards over it to see what happens t does before you do anything. Enjoy, it should be a good jointer for you. 1 Quote
Tom King Posted October 24, 2015 Report Posted October 24, 2015 (edited) I doubt moving bothered it. A couple of mine have been moved over forty times, I'm sure, and haven't needed adjustment since I first set them up. One of them is the Woodtek branded twin of that one. Edited October 24, 2015 by Tom King Quote
rodger. Posted October 24, 2015 Report Posted October 24, 2015 I think Grizzly's site has a jointer setup video specific to their product. Head over there or YouTube it. Quote
Pete Staehling Posted October 25, 2015 Report Posted October 25, 2015 (edited) Nice buy. I hope you enjoy it for many years.Just me, but... If it was mine, I would do a quick check that everything looks OK, then try some jointing. If it didn't seem to be working well I'd go through the setup procedure right away. Otherwise I'd use it for a while first and probably only go over it thoroughly when/if it wasn't working perfectly. After using it for a good while and was well acquainted with using it, I might dig in if I just felt like doing it to get more familiar and to be sure it was all in tune. Edited October 25, 2015 by Pete Staehling Quote
bgreenb Posted October 25, 2015 Report Posted October 25, 2015 Congrats Joseph. This will really up your game. Agree with what others have said - joint a board first and see what happens before you start messing with it. Quote
Trip Posted October 25, 2015 Report Posted October 25, 2015 Try it first, unless something is obviously off – then it becomes a safety issue... Quote
JosephThomas Posted October 25, 2015 Author Report Posted October 25, 2015 Everything is 'safe' and it's still running well, but I can see that the fence is off from 90, and it looks like the beds aren't perfectly coplanar anymore. I'll adjust the fence today and wait until i have a better straight edge to align the beds. Can anyone recommend another straight edge besides the lee valley one that Marc used in his jointer setup video? I think this is it: http://www.leevalley.com/US/wood/page.aspx?cat=1,240,45313,50074&p=50074Still going back and forth about what size to get, my jointer is only 46", seems like the 38" would be plenty (and it's much cheaper)... Quote
Tom King Posted October 25, 2015 Report Posted October 25, 2015 (edited) I use a long level (78" aluminum) that is kept in a safe place from being banged around, and it's plenty good enough for aligning jointer beds. An older version of this one: http://www.homedepot.com/p/Empire-True-Blue-78-in-Magnetic-I-Beam-Level-EM51-78/202035301 Edited October 25, 2015 by Tom King Quote
Brendon_t Posted October 27, 2015 Report Posted October 27, 2015 Everything is 'safe' and it's still running well, but I can see that the fence is off from 90, and it looks like the beds aren't perfectly coplanar anymore. I'll adjust the fence today and wait until i have a better straight edge to align the beds. Can anyone recommend another straight edge besides the lee valley one that Marc used in his jointer setup video? I think this is it: http://www.leevalley.com/US/wood/page.aspx?cat=1,240,45313,50074&p=50074Still going back and forth about what size to get, my jointer is only 46", seems like the 38" would be plenty (and it's much cheaper)...I actually can't. I own the 38" and it's a great tool to own. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.