Recommended Posts

Posted

I am using Poplar most of the benches like this that I have read about have been made out of Southern Yellow Pine, which I can't get or Doug Fir and most of what I see of that around here was going to be more work then money saved.  The bench will be 21 inches wide and 6 ft long.

Posted

Nice, looking forward to seeing this. I have been doing a lot of research lately on benches. Are you planning on doing a laminated top like the Roubo style? That was one of the upgrades I read in Chris Schwarz' book.

  • Like 1
Posted
2 hours ago, Al Capwn said:

Are you planning on doing a laminated top like the Roubo style?

 I am doing more of the slab style top that you normally see on the Nicholsons.  I am using stock that milled down to 1 1/2 inches, but the whole area between the outside of the legs will be twice as thick or 3 inches.  I am also doing this to the aprons.  It will give the bench more mass and the dogs and holdfast will work better.

Posted

This is awesome Chet! I look forward to following this. Refreshing to see a bench build other than the roubo. Dont get me wrong, I like the roubo and the great journals but im stoked to see a different design.

How come you didnt use your new laj to flatten one side and then pass through the planer?

Sent from my SGH-I337M using Tapatalk

  • Like 2
Posted
30 minutes ago, shaneymack said:

How come you didnt use your new laj to flatten one side and then pass through the planer?

It's in the mail, I think it is supposed to be here Thursday.  But I wanted to get started on this, its been a while since I have been in the shop.  I was also wondering if trying to learn on something of this size was wise.  I am going to have to do some flattening on the top.

Posted
How come you didnt use your new laj to flatten one side and then pass through the planer?

It's in the mail, I think it is supposed to be here Thursday.  But I wanted to get started on this, its been a while since I have been in the shop.  I was also wondering if trying to learn on something of this size was wise.  I am going to have to do some flaring on the top.

I see. I thought you had already received it, my bad.

Sent from my SGH-I337M using Tapatalk

Posted

Gotta love the expediency that you can put that Nicholson bench together. Compared to the several weeks/months long affair with the Roubo builds, this seems like a walk in the park.

  • Like 2
Posted

Probably not a walk, as there's lots going on there, but he is making great progress. Framing a house is the most obvious progress, finishing it out is labor intensive! Looking great Chet!

  • Like 2
Posted

Thanks Guys.  Were as there are no condor tails or Benchcrafted hardware involved, it has some small challenges.  Working with 8/4 stock 11 inches wide to start with and milling it with out a 12 inch jointer:P you can work up a bit of a sweat.  But it is going well and I am enjoying it.  

  • Like 2
Posted

That looks great! The grain on the poplar should give you a pretty nice looking bench. How much lumber do you figure you'll have into it when all is said and done?

  • Like 1
Posted

When I measured up the cut list it was right a 90 board feet with everything milled to final size.  I had purchased 125 BD FT and just for the fun of it I was going to calculate what is left just to see how it all works out.  I have emptied the DC once with it being half full again already.

Posted

Chet, down here, our poplar is a greenish color. I saw some in Louisiana that had some neat looking brown streaks in it. I guess it's different per area? Do you have pics of yours? Hell, what am I asking, you already have. That looks like the stuff from LA. Great looking.

Posted

There is actually some green and brown in the batch that i picked up.  Unfortunately the best two pieces to make up the top was one of each.  I wasn't really happy about how it worked out buuuut it is a work bench  not a dining room table. Lol.

Posted
4 minutes ago, Chet K. said:

There is actually some green and brown in the batch that i picked up.  Unfortunately the best two pieces to make up the top was one of each.  I wasn't really happy about how it worked out buuuut it is a work bench  not a dining room table. Lol.

Totally agree! I have a work bench and not a show bench but yours looks like it will be both!

Posted

...and actually it darkens for a fairly dark chocolate brown. I have some poplar that hard some big green stripes that have turned cocoa. Wasn't expecting that, but it isn't an unpleasant color.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 57 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined