Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Wood ID Help

Featured Replies

I received a large old beam from my mother in law a few years ago and had it sliced up last weekend. I was hoping someone might be able to offer some insight as to what would it might be.

The beam was about 10' long, 13" wide, and 4" thick, I assume it was meant as a joist or support of some sort, but the lack of nail holes or anything makes me think it was never actually used. She doesn't remember where my late father in law got the wood but it was somewhere in middle Tennessee. If more pictures would help just let me know.

03FB4F62-048C-471A-9CF4-8A64E715B07C_zps

2F6CA579-3103-4724-9406-28DDB83E5C01_zps

5728D5F5-348A-4024-B4E7-BDE73EF1C554_zps

The end grain looks vaguely like cherry but the faces do not. Nothing pops into my mind right now. Hopefully someone with a better idea will chime in .

might be sycamore. 

A few good close up pictures of the faces would help. Mike might be right but hard to tell with out closer pictures. Ultimately an end grain shot which has been sanded until it is perfect is one of the key techniques to really narrowing it down as to what kind of wood it is. Spalting can go so many different ways and just adds more confusion and difficulty.

  • Author

I will get some more detailed shot taken today. Unfortunately it isn't spalting but some old tracks from powder post beetles, it was stored in a older house on their property with no intent to ever be used for lumber.

I've never seen sycamore so light in color but that doesn't mean it isnt. All the sycamore I've seen had a constant red to medium brown tone 

44 minutes ago, Brendon_t said:

I've never seen sycamore so light in color but that doesn't mean it isnt. All the sycamore I've seen had a constant red to medium brown tone 

maybe california sycamore is different.  Over here sycamore is about the color of maple, maybe a littl darker.   The ray flek in QS sycamore is brown but the main color is creamy  

1 minute ago, Mike. said:

maybe california sycamore is different.  Over here sycamore is about the color of maple.   The ray flek in QS sycamore is brown but the main color is off white.  

Here is a picture of some sycamore we cut.  It is freshly cut here so the color does mute a bit to the brown side.  Definitely couldn't be confused with maple.

04d450590748a84dd861df397316d58a.jpg

  • Author

Here are a few new picture, the first is end grain sanded to 320. The second is the same piece jointed and sanded to 320. The last picture is a larger piece I ran through the drum sander at 120 to clean it up a bit for a larger frame of reference. It doesn't look much the sycamore above, but it does look similar  to the stuff on hobbit house.

C2199BB2-F09F-49DE-A80B-E6B1ADF5EDDC_zps

0F1B9963-0CC1-48BA-BA5D-8D9035F0AE78_zps

 

4F619704-DBB8-461F-8981-EB6B1985316C_zps

  • Author

Seems unlikely coming from Middle Tennessee, it was a very rough board. Definitely not something that was imported for lumber

Does it smell weird when you work it? I have some sycamore and it us very pungent.

Pardon the spelling sent from my phone.

  • Author

I haven't done a whole lot with it but it smell's pretty neutral when working with it.

I'm throwing my vote in as maple. It kinda looks like this maple i have here.

2b5c75ad0846340c65562995d9d70050.jpg

Pardon the spelling sent from my phone.

I have never seen that color in fresh cut poplar and that is throwing me off. Poplar is the best match if I ignore the color. You two are likely right. 

  • Author

It certainly looks like some pictures of poplar, but it is much denser than poplar I have worked with before. While the board is freshly resawn it was originally cut well over 20 years ago at least, not sure how that would affect the color

I have cut into brown poplar over 150 years old that was bright green a mere1/8" below the surface. Poplar is not all green, but you get the picture. Old timbers oxidize from outside in and often show different color fresh off the saw. 

Looking at the new pictures more closely I think it is maple.  The end grain and face grain of the quartersawn board look most like maple to me.    Yes it could be poplar (always hard to tell from a picture) but if you have any experience with poplar and maple you should be able to tell from weight and hardness alone.  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.