Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Cleaning duct work

Featured Replies

Curious how and how often you clean your dust collector ducting? I'm noticing a significant drop in suction off of my table saw and have taken apart the duct (PVC and flex hose) that connects to it from my 6" main trunk line. All is clear at the end of the line but i'm thinking there might be a blockage further up. Before i start taking 40' of PVC apart that's taped at the joints I figured i ask what y'all do and how often. 

I haven't had to clean out my duct work in the 15 years it has been assembled, except the one time I plugged up the entry by leaving the blast gate for my table saw closed. I may get slammed for this, but sizing the ductwork to keep air velocity up and allowing enough air in to keep the flow up is as important or more important than using big ducts. According to the ASHREA (sorry if I misspelled that) handbook, air velocity needs to be 4000 feet per second or higher to keep sawdust suspended and moving. At the quantity of air needed for woodworking tools, that typically works out to a (surprise!) 4 inch duct. When a single 4 inch duct joins a large duct, air velocity drops and the sawdust can drop out of the air stream. You might try cracking open another gate further down the pipe to add air and keep velocity up.

To clean you ducts, try opening all of the gates and turning the collector on.

9 minutes ago, Robby W said:

] According to the ASHREA (sorry if I misspelled that) handbook, air velocity needs to be 4000 feet per second or higher to keep sawdust suspended and moving.

2700 mph DANG that's some fast moving air. Do you mean 40 fps?

  • Author

Thanks guys, it's a Jet 1100 with a bag, not venting outside. I beat the filter bag the other day but didn't help. I'll try turning the bag inside out and taking the air compressor to it. 

Just now, N00b-in-training said:

Thanks guys, it's a Jet 1100 with a bag, not venting outside. I beat the filter bag the other day but didn't help. I'll try turning the bag inside out and taking the air compressor to it. 

I have found my filter bags to be both convenient and a pita.  Do you run a drum sander?  it feels like every time I run the drum for any length of time,  I need to beat the piss out of the bag.  Those super find particles just kill the bags ability to exaust air thus killing suction.

  • Author
19 minutes ago, Brendon_t said:

I have found my filter bags to be both convenient and a pita.  Do you run a drum sander?  it feels like every time I run the drum for any length of time,  I need to beat the piss out of the bag.  Those super find particles just kill the bags ability to exaust air thus killing suction.

I don't have a drum sander but would be happy to buy yours since it's such a PITA. ;) 

2 minutes ago, N00b-in-training said:

I don't have a drum sander but would be happy to buy yours since it's such a PITA. ;) 

My drum sander ain't going nowhere until I replace it with a supermax.

Yep only happened to me once in 7 or 8 years. I use heating and cooling pipes for my runs. What happened, I got lazy used an open drop with flex hose to suck up a pile of saw dust and some off-fall that was on the floor. A piece of off-fall got stuck in a turn in my main runner. I was planing some boards and noticed shavings accumulating in the flex hose.

So now I'm more mindful of the off-fall and dust collector. 

 

-Ace-

   

  • Author

Welp. That was fun.

1st - it was the filter bag that needed cleaning. Despite my banging on the upper filter often it was still rather clogged up. Turned it inside out and took the air compressor to it. New machine!!

2nd - I thought I had the metal strapped secured when I put it back together. Nope!!! The back edge popped off and blew the dust that was sitting on top of the vortex cone all over the garage when I started it up.

3rd - my dust collector sits "outside" of the shop, aka the car side of my garage which is separated by a wall..., it blew a huge blume of dust through the garage and outside like a chimney.

Sent from my iPhone using Tapatalk

13 hours ago, Chestnut said:

2700 mph DANG that's some fast moving air. Do you mean 40 fps?

I"ll have to look it up, but it eats fast. Memory isn't what it used to be. The point I was trying to make is the velocity has to stay up and have sufficient airflow to carry the dust.

Update: I should have said 4000 feet per minute. That's about 45 miles per hour.

  • Author
Dud your cars end up like this?

21215_10100193468439829_2119788029_n.jpg?oh=c4e255a1e3bdf898221cdfd5cccdbc6d&oe=57852748

Not that bad. However, the AC in my wife's van blew up today and she left the windows down...

Sent from my iPhone using Tapatalk

  • 3 weeks later...

I left clean-out ports in a couple of locations on my ductwork. I stopped checking after never finding any spoil when repeatedly checking. I would consider filter or bag cleaning before I went to tearing my ducting apart.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.