Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Morning glory table

Featured Replies

I decided I wanted to put a project together for an art gallery. It needs to be done by November. This is probably going to be a slow journal because I am remodeling a house as well as doing commission work. That puts this as something to do when I am waiting on the other two. Here is the design. 61ab1eb6becaef17b036494ea3b223bf.jpg The two woods it will be made from is zebra and maple.

First thing was to make the legs. Because the legs are going to be bent lamination they will lose some curve. As a result I am building the legs first so I know the angles of all the rest of the pieces. I resawed the legs. f66f4d991111894ce46384832718947d.jpg Then I made a jig so they would all be the same. 259494579153bf17ded6bce467f0c8db.jpg you can see that there are two drill guides. Those are for the dowels when I glued the jig together. Once I had the jig made and the boards cut down, I put them in my veneer press. 1b7169c2274d27a81fff3d07e12a738f.jpg You can see that the bag is to big but it is what it is. I bought the bag from veneer supply and I use the Venturi from Infinity tools.

Looks like great fun.  Some things jump out at me while looking at the drawing:

  • How is the design on the front apron to be executed?  Painted?  Inlaid?  Relief carving?  If time is short and you've got other irons in the fire, I'd vote for the former.
  • How are you bending the legs?  Neither zebra nor maple is particularly good at steam-bending, so I presume these are bent laminations?
  • The legs hit the floor at the same spacing as they hit the top.  Perhaps close this in a little bit to lighten the piece even further and suggest it "blooming" up from the floor.
  • Have you ever done a tapered bent lamination a la David Marks?  These legs could benefit from tapering down to the bottom.  If you're jigging up to make bending forms and the like, doing a tapering sled for the planer/drum sander isn't that much more work.
  • I can't believe I'm going to say this, but could you float the top such that it doesn't touch the top of the legs?  I'm rarely a fan of floating tops, but this design seems to want it.  This would also simplify joinery dramatically and give you the chance to do something more interesting with the top points of your curved legs.
  • The top can be a little thicker.

EDIT:  Sorry.  Didn't see that the project was already under way before posting.

Edited by Bombarde16

This will be a cool project to project to follow...I must admit I like the name of the table also.

  • Author
Looks like great fun.  Some things jump out at me while looking at the drawing:

  • How is the design on the front apron to be executed?  Painted?  Inlaid?  Relief carving?  If time is short and you've got other irons in the fire, I'd vote for the former.
  • How are you bending the legs?  Neither zebra nor maple is particularly good at steam-bending, so I presume these are bent laminations?
  • The legs hit the floor at the same spacing as they hit the top.  Perhaps close this in a little bit to lighten the piece even further and suggest it "blooming" up from the floor.
  • Have you ever done a tapered bent lamination a la David Marks?  These legs could benefit from tapering down to the bottom.  If you're jigging up to make bending forms and the like, doing a tapering sled for the planer/drum sander isn't that much more work.
  • I can't believe I'm going to say this, but could you float the top such that it doesn't touch the top of the legs?  I'm rarely a fan of floating tops, but this design seems to want it.  This would also simplify joinery dramatically and give you the chance to do something more interesting with the top points of your curved legs.
  • The top can be a little thicker.
EDIT:  Sorry.  Didn't see that the project was already under way before posting.

The design on the front is going to be inlayed.

I have thought about tapering the legs to give it a lighter feel. I am not really sure which way I am going to go. It will be an on the fly decision.

It is hard to tell from the picture but the top is going to be floating. It would be nice to make the top thicker but it would put it to far out of the desired price range.

It's nice to see someone planning ahead by doing the legs first then fitting the rest of the parts to however the legs come out.

I agree that pushing the feet in slightly may improve the stance & appearance. If the lower crosspiece is a shelf I would use glass to prevent a shadow under the piece.

I would like to see a side view if you have one . Very nice design !

  • Author
It's nice to see someone planning ahead by doing the legs first then fitting the rest of the parts to however the legs come out.

I agree that pushing the feet in slightly may improve the stance & appearance. If the lower crosspiece is a shelf I would use glass to prevent a shadow under the piece.

I would like to see a side view if you have one . Very nice design !

Sorry Steve no side view only in my head.

I understand that. Many times one front view is all I do and that is just a crude sketch.

Eager to see your progress on this one !

Great design! Also, great name for it. I can never think of a cool name for a piece, lol.

  • 2 weeks later...
  • Author
  • Popular Post

I got a little bit done while waiting for clue to dry. I decided to taper the legs a little. 414086a7cbf5e2a3ceb360a3484b0e42.jpg73410d61fa4f71405097b03f060f3ca4.jpg I then made a full size mock up so I could get the angles right. a784b97e4a1332a81b97d7abd8d9e96f.jpg That is all the progress for now. Here is the current project. It is a giant fake beam. I figured I might as well. Put in the other projects along the way since this one might take me a while. . 8a3e9a4af9c9c54bfa0e05d56242353d.jpg This is my daughter trying to help. bf130a0e41e6f5e6c449a9928fb1bf56.jpg We are still working on the form and that she should probably cut with her dominate hand. She worked so hard but just couldn't cut through.[emoji4]

  • Author
What's with the giant fake beam? Are you planning to fake the end grain, too? If so, I want to see!

The giant fake beam is to cover up a drywall beam. It runs into two walls so there will not be any ends.

  • Author

Well I haven't got any more work done on the table but I did get one of the commission jobs out of the way. Here is a picture of it. I made the brackets for it as well. It is just plywood that I used a locking miter to make the 90's. I used General Finises Java gel stain and finished it with spraying on water based poly. On a side note I tried to buy a membership deal but it gave me this message.  There was an error processing the payment. Please try a different payment method or contact us for assistance.  Not sure about that. I was hoping to have some more journal for the table but as I was installing the beam, he asked if I could do a kitchen of cabinets. I am still hopeful that this table will be finished by Nov though. 

Beam Picture 2.JPG

Beam Picture 1.JPG

What did you use for the "strap" hardware? I've been tinkering with a chest project and that's the sort of thing I was looking for.

-E

  • Author
What did you use for the "strap" hardware? I've been tinkering with a chest project and that's the sort of thing I was looking for.

-E

I just got a 3" by 1/8" piece of metal from Lowes. I cut it and welded it together then painted that and the lag bolts black.

  • Author
Looks good, Brad. What is a "membership deal"?

Where you can pay a couple bucks to help Marc and not see ads.

Where you can pay a couple bucks to help Marc and not see ads.

Ahh LOL. Gotcha

Sent from my SM-N910W8 using Tapatalk

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.