Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

West Systems as a Finish

Featured Replies

I'm finishing off a solid Maple and Jarrah longboard and have jumped straight in the deep end after watching youtube videos. I picked up some West Systems today and drizzled it on, scraped and rolled it around and used a heat gun to remove some bubbles. 

I'm assuming I can just keep going with a few layers to build up a thicker coat? Any suggestions to go along with this? I was considering getting some fibre glass cloth and putting a layer on with a few coats of epoxy.

My main inspiration was this: 

 

IMG_3963.JPG

longboard_1.jpg

Epoxy has absolutely no resistance to UV, so you'll have to protect it somehow.

  • Author

Thanks, I'll keep exploring options. 

West makes a very slow drying finish that can be used for this.  As noted, no UV protection, but how often will the board be left out in the sun?  Worst case, a few coats of Epifanes over the top would do for UV.  See the WEST system book for more info.

Instead of fiberglass you could also look into carbon fiber wrap, which is stronger among other things.

Bear Mountain boats, the company Nick Offerman shot a canoe video for, uses west systems and special clear fro the fiberglass on their boats. I don't know off hand if they put any additional finish on top of it though.

I have build a quite a few canoe and kayak paddles as well as other stuff with West Systems or Raka and glass in the past.  As already mentioned you need to put something more UV resistant on top of the epoxy if it will be in the sun much at all.  I used some kind of urethane over it with good results.  I don't recall exactly what urethane I used since it was a long time ago.

BTW, for epoxy I am more inclined to use Raka than West Systems.  It is good stuff at a decent price.

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.