Recommended Posts

Posted

Thanks Mark. It's uphill yeah. I just have to remember I'm not in a rush and make the best out of what I have.

I forgot to mention the price of local hard woods is pretty decent so once I get over the tools cost and make enough connections with the local providers I should be alright.

Posted

Whoa, that was a novel.  I had to skim a few parts because I felt myself growing old about halfway through.

Yeah, you have some challenges to contend with.  Tools and lumber will be more difficult and costly to acquire.  The good news is everything else is the same in every corner of the world.  A board is six-squared the same way in New York as it is in Timbuktu.  Dovetails are dovetails.  Sanding sucks on every continent.

So once you have your shop and lumber connections established, you'll only be facing the same frustrations that we lucky Americans face.  Failing to chop straight down with your chisel, a board goes wonky on you overnight, you cut on the wrong side of a line and sail that bastard into the drywall for punishment.

You may want to contact @Immortan D for some tips on tool acquisition.  Daniel is way farther from civilization than you are...I believe Argentina if memory serves.  He's managing just fine.

You're on your way.  Good luck.

  • Like 1
Posted

Welcome to the Forum. 

I read your manifesto and to be totally honest it makes me feel a little bit guilty about the complaints I have about getting tools/equipment in Canada. I definitely have to pay la lot more for shipping fees and customs/taxes than I would like BUT I do have access to many/many tools from the USA with relative ease.

Anyway, welcome and please keep us up to date with your progress and your projects!

  • Like 2
Posted
3 hours ago, Eric. said:

Whoa, that was a novel.  I had to skim a few parts because I felt myself growing old about halfway through.

 

3 hours ago, ChrisG-Canada said:

I read your manifesto ...

3 hours ago, ChrisG-Canada said:

 

I know, quite a read. Thanks for sticking with it though. I grew a couple white hairs writing it myself hahah

3 hours ago, Eric. said:

A board is six-squared the same way in New York as it is in Timbuktu.  Dovetails are dovetails.  Sanding sucks on every continent.

So once you have your shop and lumber connections established, you'll only be facing the same frustrations that we lucky Americans face.  Failing to chop straight down with your chisel, a board goes wonky on you overnight, you cut on the wrong side of a line and sail that bastard into the drywall for punishment

Absolutely, but that's the fun part. I do appreciate having the same issues, those are likely to have made someone frustrated enough to find and document a solution.

Sanding ain't that bad though, except on the very hard/dense woods that make ridiculously fine dust, but those tend to give the most rewarding results.

Posted

You might want to take a look at people like Matthias Wandel, John Heisz, Marius Hornberger, Jeremy Schmidt on YouTube who make some of their own tools.  For those of us who have access to the tools that we do in the US or Europe it doesn't really make much sense to do this but when it's very difficult to get your hands on them it can make sense.  

  • Like 1
Posted
13 minutes ago, krtwood said:

You might want to take a look at people like Matthias Wandel, John Heisz, Marius Hornberger, Jeremy Schmidt on YouTube who make some of their own tools.  

Absolutely! Wandel is his own kind of genius for sure. I'll most likely try making a drum sander at some point.

Posted

Very inspiring post. And to think that I complain of not having enough space to do woodworking!

I am sure you will do well specially if your woodworking talent will take you as far as your writing talent,

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 46 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined