Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Shopping spree

Featured Replies

Don't buy the 2x4 mdf panel.  Buy a full sheet and have them rip in half and crosscut.  The 2x4 sheets are the biggest rip off at Home Depot.

47 minutes ago, Woodenskye said:

Don't buy the 2x4 mdf panel.  Buy a full sheet and have them rip in half and crosscut.  The 2x4 sheets are the biggest rip off at Home Depot.

Agreed - the 2x2 panels are atrocious too.

1 hour ago, Cliff said:

I bought that year before last and I gotta say I'm not pleased with Jet. They are super hard to adjust. So count me out of that stuff I think. Plus sales are never a sure thing, like last year. I bought my first Bessey parallel clamp last week and am hoping that will be my new awesome sauce. 

 

58 minutes ago, C Shaffer said:

Every time someone says the Jets are hard to adjust I wonder. I have no trouble. 

 

I own both Jets and Besseys and I do agree that the Jets can tend to be a little sticky.  Keeping them clean of glue boogers helps but even when they're brand spankin' they can be a little uncooperative.  It might sound weird but once you get used to their quirks they do get easier to operate...you gotta find "the touch," and then they submit...like a broke horse. :)

The bars on the Besseys are more finely machined and the heads operate more smoothly.  However, the bars are also thinner than the Jets and they tend to flex more under load.  Whether or not this translates to less clamping power, not sure...but I don't think it really matters...the Besseys offer plenty of torque, especially for clean joinery, which we should all be striving for anyway.

All else being equal, if I were to go back in time and buy my entire collection of parallels at full retail, I'd probably get the Besseys because I do think they're slightly higher quality clamps.  But if you can buy Jets at 50% off, they become more attractive than the Besseys at that point, IMO.  Also I'm pretty sure Jet offers a lifetime warranty on their parallel clamps...not sure about Bessey.

 

I own both Jets and Besseys and I do agree that the Jets can tend to be a little sticky.  Keeping them clean of glue boogers helps but even when they're brand spankin' they can be a little uncooperative.  It might sound weird but once you get used to their quirks they do get easier to operate...you gotta find "the touch," and then they submit...like a broke horse. [emoji4]

The bars on the Besseys are more finely machined and the heads operate more smoothly.  However, the bars are also thinner than the Jets and they tend to flex more under load.  Whether or not this translates to less clamping power, not sure...but I don't think it really matters...the Besseys offer plenty of torque, especially for clean joinery, which we should all be striving for anyway.

All else being equal, if I were to go back in time and buy my entire collection of parallels at full retail, I'd probably get the Besseys because I do think they're slightly higher quality clamps.  But if you can buy Jets at 50% off, they become more attractive than the Besseys at that point, IMO.  Also I'm pretty sure Jet offers a lifetime warranty on their parallel clamps...not sure about Bessey.

 

Meanwhile I'm over here crossing my fingers that Jorgensen's new Chinese overlords will keep the quality of the Cabinet Master line on par with what they had been.

  • Author

Wasn't going to get involved with the compressor and nailer, but then I saw these two combo offers:

$200 for a Porter Cable pancake with three nailers, 16g finish, 18g brad and a stapler:
http://www.homedepot.com/p/Porter-Cable-6-Gal-Portable-Air-Compressor-16-Gauge-Nailer-18-Gauge-Brad-Nailer-Crown-Stapler-Combo-Kit-PCFP12234/203471431

They also had a $150 for a DeWalt pancake with a single 18g brad nailer in the store, but I don't see the deal on line.

Sound like a good deal?
 

17 minutes ago, Mark J said:

 

$200 for a Porter Cable pancake with three nailers, 16g finish, 18g brad and a stapler:
 

 

I'd trade all three of those guns for a 23 gauge pin nailer (within the context of fine woodworking).

You can't go wrong with a Grex 23 gauge pin gun, but they are kinda pricey. Big Sky Tools has rebuilt Hitachi ones from time to time at $65 .But they need frequent adjustment if used 8 hours a day for a week or 2. Should be fine for hobby work.

I've pretty much retired my nailers and pancake compressor. I don't use a pinner, and the brads were for jigs and shop furniture. Since getting an electric brad nailer (my only Ryobi battery tool) they just gather dust.

 

11 hours ago, BonPacific said:

I've pretty much retired my nailers and pancake compressor. I don't use a pinner, and the brads were for jigs and shop furniture. Since getting an electric brad nailer (my only Ryobi battery tool) they just gather dust.

 

I looked at a cordless 18 gauge for DIY and jigs, but I found them very heavy and bulky.  Care to share your opinion, since you have some real world use?

20 minutes ago, Pug said:

I looked at a cordless 18 gauge for DIY and jigs, but I found them very heavy and bulky.  Care to share your opinion, since you have some real world use?

Which one did you look at? The Makita (my usual brand of choice) is just badly designed, a surprising misstep from them. The DeWalt is absolutely massive. The Ridgid looks like it might just be a re-branded Ryobi (same parent company). I've heard good things about the Milwaukee's, but the price on those is kind of prohibitive for a DIY tool.

The Ryobi AirStrike is a little heavier than a brad nailer, but I'd say it's about the same weight as my PC 16ga nailer. It is bulkier, but the balance is pretty good. The only problem you might have is that it's harder to get the Ryobi into an inside corner, since it's about twice as wide/thick as an air-powered tool, but the top isn't any thicker, so it's mostly not a problem. The nose-cap is a touch wider than the Porter Cable, but again, not a big deal for most uses. It also has bump-fire, which my cheap PC nailers don't have. Though I've never used that feature.

Really the biggest benefit is not being tied to an airhose. I can grab the tool off the shelf and go right to work. The Ryobi also sits upright like a drill, making it very convenient to keep at hand, no tripping hazards. My compressor was oil-less, so the noise was another deterrent to actually using the thing.

I'm using a single compact Li battery (1.2ah), as I'm rarely putting in more than a handful of nails. If it runs down, 5-minutes on the charger gives me enough juice to fire more nails than I've ever needed.

  • Author

I gather that the Ryobi drives 18g brads, which are heavier than the 23g pins recommended above.  Do you find the 18g heavier than you wish you had?

For me I am not close enough to my tipping point on a nailer that 10% is going to move me to buy.  But I find the idea interesting for a future purchase.  And I like the idea of a battery powered unit.  

Might keep an eye on these.

2 minutes ago, Mark J said:

I gather that the Ryobi drives 18g brads, which are heavier than the 23g pins recommended above.  Do you find the 18g heavier than you wish you had?

99% of the time you're using pins in furniture projects, it's just to hold something in place while the glue dries...it's not a structural application, so the small pin is all that's needed.  Plus the heads are so tiny you can barely see the holes...not the case with a brad.

Of course, best practice (IMO) is to NEVER USE NAILS in fine furniture...that's what makes it fine.  I know historically nails have been used even in some high end pieces...but this ain't the 18th Century no mo.  We have options they didn't have.

Nailers are for jigs...or for shooting a bad guy in the face if you find yourself in a movie. 

12 minutes ago, Mark J said:

I gather that the Ryobi drives 18g brads, which are heavier than the 23g pins recommended above.  Do you find the 18g heavier than you wish you had?

For me I am not close enough to my tipping point on a nailer that 10% is going to move me to buy.  But I find the idea interesting for a future purchase.  And I like the idea of a battery powered unit.  

Might keep an eye on these.

I'm only ever using the nailer for shop jigs, so weight doesn't really make a difference. You can get 18ga nails in just about any length.

1 hour ago, Eric. said:

Of course, best practice (IMO) is to NEVER USE NAILS in fine furniture...that's what makes it fine. 

Oh no...here we go again...  Who's going to be the first "I've disassembled and restored priceless antiques and they had nails in them"?

6 hours ago, BonPacific said:

Which one did you look at? The Makita (my usual brand of choice) is just badly designed, a surprising misstep from them. The DeWalt is absolutely massive. The Ridgid looks like it might just be a re-branded Ryobi (same parent company). I've heard good things about the Milwaukee's, but the price on those is kind of prohibitive for a DIY tool.

The Ryobi AirStrike is a little heavier than a brad nailer, but I'd say it's about the same weight as my PC 16ga nailer. It is bulkier, but the balance is pretty good. The only problem you might have is that it's harder to get the Ryobi into an inside corner, since it's about twice as wide/thick as an air-powered tool, but the top isn't any thicker, so it's mostly not a problem. The nose-cap is a touch wider than the Porter Cable, but again, not a big deal for most uses. It also has bump-fire, which my cheap PC nailers don't have. Though I've never used that feature.

Really the biggest benefit is not being tied to an airhose. I can grab the tool off the shelf and go right to work. The Ryobi also sits upright like a drill, making it very convenient to keep at hand, no tripping hazards. My compressor was oil-less, so the noise was another deterrent to actually using the thing.

I'm using a single compact Li battery (1.2ah), as I'm rarely putting in more than a handful of nails. If it runs down, 5-minutes on the charger gives me enough juice to fire more nails than I've ever needed.

i already have quite a few of the ridgid cordless tools, so i was looking at the ridgid. it also rceived good reviews, so i went to put my hands on it at home depoop. I just found it too heavy and bulky. the reasons i was considering it are the reasons you listed above.

My wife works at one of the big box stores.  I just look at the 10% as buying tax free.  That's about all it is.  Much of the stuff at the big box is homeowner quality or less, a few gems but not at a discount.  Like Eric said, shop online for better price, The big box will match online stores like amazon.  . 

I wish Home Depot and Lowes had better tools. It's easy to get gift cards there from credit/debit cards, hotel points, airline miles, etc. but I never have enough to cover the full cost of a tool and then there's the issue of if I'm spending $500+ on a tool I want the best one, not the one brand they carry.

On 5/14/2017 at 9:42 PM, Denette said:

 

Meanwhile I'm over here crossing my fingers that Jorgensen's new Chinese overlords will keep the quality of the Cabinet Master line on par with what they had been.

I'm there with you. I have like 20 Jorgy parallel clamps, 4 jets and 1 bessey. Jorgensen has a great quality clamp, not as good as the other two but at the price it's an easy decision.

On 5/14/2017 at 10:25 PM, Mark J said:

Wasn't going to get involved with the compressor and nailer, but then I saw these two combo offers:

$200 for a Porter Cable pancake with three nailers, 16g finish, 18g brad and a stapler:
http://www.homedepot.com/p/Porter-Cable-6-Gal-Portable-Air-Compressor-16-Gauge-Nailer-18-Gauge-Brad-Nailer-Crown-Stapler-Combo-Kit-PCFP12234/203471431

They also had a $150 for a DeWalt pancake with a single 18g brad nailer in the store, but I don't see the deal on line.

Sound like a good deal?
 

I bought that PC deal a while back. It was garbage. It would not fill with air. So I took it back and got another. It wouldn't work either. Same prob. I finally ended up with a Bostitch and it's been good so far. 

  • Author

So I had my spree.  I ended up with:

Rigid oscilating sander.  Milwaukee drill and impact wrench set 12V.  Drill bits.  A pair of Rigid flip top work stands.  A 6 foot level.  Some misc supplies.  

The wife came along, too, and some how I ended up with two 6 foot tall potted plants.  

I skipped the MDF.  Too much hassle to save $2.20 when I don't have a need for it in the near future.

Anyway it was fun and the sander and drills are cool.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.