Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Shopping spree

Featured Replies

Thought I'd put this under The Shop since it's about shopping:huh:.

Got a coupon in the mail from Home Depot.  It is a one time (multiple items , but one trip through check out) offer for 10% off anything in the store.  Max I can buy before the discount is $2000.  

There are some other restrictions, but leave them aside for the momment.

Bearing in mind that it's 10% off, not free, and has to be in store stock, I am trying to think of some woodworking things that I would be likely to buy eventually that I could save money buying now.

I've always liked that Rigid oscilating spindle belt sander so that's top of the list.  I was also thinking of an air compressor if I ever wanted to do spray finishes.  Maybe some MDF to have on hand for a jig?

I've already got a sliding miter saw,  and they don't have much else in the big tool category.

What woodworking items wouldyou buy?  Maybe that will give me some ideas.

I'll second the Ridgid sander choice. I've had one for years & it gets lots of use. My initial impression was that it seemed kinda cheap & flimsy, but it does a great job & the belt/spindle always stays square to the table.

Milwaukee cordless tools are very good.

Can't go wrong with the Dewalt 735 planer

Yeah the Ridgid is a good call.  I just bought a little 5" Bosch ROS the other day to dedicate to finishes so I didn't get slop all over my Festool.  Drill kits and other DIY tools.  Finish supplies: mineral spirits, DNA, BLO if you use it, brushes, craft or rosin paper to keep messes at bay.  Compressors/compressor parts.  Brad/pin nailers.  Clamps (as long as they're not the models that go on sale during Black Friday...that's the time to buy those).  So much more but I can't think of anything else.  Get a cart, walk the aisles.  Given the fact that it's only 10% off you'll end up spending more than you're saving unless you only buy items you're absolutely sure you'll use. :)

10 minutes ago, Eric. said:

Yeah the Ridgid is a good call.  I just bought a little 5" Bosch ROS the other day to dedicate to finishes so I didn't get slop all over my Festool.  

Woaaaa, I have read your professions in multiple threads over the years that you wouldn't go back to 5” anything after the 6”. What changed?

The sander is a good choice. I would stay away from finished in bulk unless you'll use them before they go bad. I would be playing pimp my shop. Lighting and cabinets are what I'm still in need of.

55 minutes ago, Brendon_t said:

Woaaaa, I have read your professions in multiple threads over the years that you wouldn't go back to 5” anything after the 6”. What changed?

I won't go back to regular surface prep sanding with a 5" sander...that's just a waste of time IMO.  But the 5" is for sanding finishes...which goes a lot faster than surface prep.  And that little Bosch I bought was only 75 beans. :)  Not a bad little sander though, actually.  I'm sure DC sucks...good thing I won't have to find out.

Also, back on topic...I find prices at HD to be generally high anyway.  There's usually a better price on AZ or ebay or another internet retailer...usually shipped free and often tax-free.  You may find even with your 10% coupon it's still more expensive at HD...especially after tax is added.  Food for thought.  I reserve HD for "in a pinch" situations when I don't have time to wait for delivery.

  • Author

Great suggestions.  Eric is absolutely right.  I have to keep reminding myself that it is The BORG and it's only 10% (which means that 90% still has to be explained to the wife).  Still I am at least going to get the Rigid sander.  

I would definitely jump on the DeWalt 735 planner, but alas that's on line only.  I could get the 734, but I'm not that thrilled with it.  Milwaukee cordless, yeah, I could see a drill following me home to join forces with my M12 driver.  I hadn't thought about storage and supplies, either.  

If I did jump on a compressor it would be for HVLP spraying and "Norm Nailing".  

I am not sure I want to grow up to be just like Norm, but I have seen a lot of folks pop in some nails when glueing in lieu of clamps, particularly for a jig.  Just what are they popping in?  I am guessing either brads or finishing nails.

The above doesn't seem to require much of the compressor, but HVLP spraying seems to need a bigger unit.  What would I be looking for?  Would a compressor rated for intermittent rather than continuous HVLP be adequate.

Honestly I an air compressor is one of the tools I'd go to craigslist for. It's a very simple machine that will last a long time with a little maintenance.  I bought a 6hp, 30gal compressor for somewhere about $40.  It's at least 10 year's old and still does work when needed.

You need a gigantic compressor to power most HVLP.  Unless you have a giant shop or use that much air for something else, it's not eaten space that I can justify.  I run my nailers on a tiny little Senco hot dog.  It's enough for blasting stuff clean with a nozzle, nailing, filling up a flat tire.  Mechanics with pneumatic tools have different needs.  Probably why Brendon is more inclined to own a bigger unit.  Turbine for hobby shop finishers.  IMO

Eric has a good point. A a single or double hotdog is plenty for most shop use. I run impact wrenches, and pneumatic ratchets which consume a lot of air.

I like the new Makita drill, I would stock up on finishes, clamps, nails for nailers, and I would make another small tool box with wrenches and stuff that I could dedicate solely to the shop.

I'd probably buy out their stock of Bessey clamps. Then pick up a Milwaukee set of some sort. 

Ridgid has a nice cordless circular saw, which I bought a while back.  They have a good shop blower as well, kind of a short neck leaf blower.

  • Author

Yeah I'm talked out of the big compressor for the forseeable future.  

But if was going to look at a nailer would it be for brads, finishing nails, both or something else?

Come to think of it Milwaukee has some kind of 18 volt nailer which I glanced at.

24 minutes ago, Mark J said:

But if was going to look at a nailer would it be for brads, finishing nails, both or something else?

99% of the time I'm using pins.  And only on jigs.  And even then it's last resort.  I hardly ever use a nailer but it's nice to have it when that one situation arises.

Nailers are nice for cabinetry, so you can tack pieces together before driving screws.  

Coupon or no coupon, next time you make a purchase at HD or Lowes for $200 or more, ask for the dept. mgr. and ask him for a 10% discount. 9 times out of 10, I've received it. A friend that use to work for HD told me about this. 

When I was doing more DIY projects that required more DIY tools and materials, I'd always swing by the post office and grab a couple moving packets on the way to Lowe's...they were stuffed with coupons, including a Lowe's 10% off your entire purchase.  Not sure if they're still in there...but they were for years.  Worth a look if you're making a significant purchase.  Home Depot would honor the Lowe's coupon as well.

You can also buy a stack of coupons on ebay for peanuts.  But again...10% off at any of the box stores still isn't much of a discount when you consider their inflated prices and tax.  But they are convenient.

Lots of good ideas above - shop suplies (glues, etc), MDF for jigs, and the Ridgid Spindle Sander is an excellent idea.

I agree with Eric - a compressor for finishing needs to be a big one.  I'd suggest a small pancake-size compressor do run air nailers and blow compressed air, and then separately look into an HVLP system instead of a large compressor.  as mentioned,  CL is also an option if you're really set on a large compressor.

Clamps, clamps, clamps. Parallel clamps, especially.

 

I'd also look into high-quality shop lighting. HD sells LED panel lights that are 2'x4' and provide tons of soft light, won't need replacing for the foreseeable future, and barely use any power.

 

Router bits are good to stock up on, too - my local HD stocks a few Freud bits that are excellent. Also, if you don't have a trim router in addition to a larger one, trim routers are awesome to have around.

 

What's your shop like? Is it insulated? Mine is an uninsulated garage, and $200 of attic insulation last summer made it soooooo much more comfortable out there.

 

How are you set for miscellaneous hardware? Buy a box of each commonly used size of screw, nut, bolt, washer, and so on, as well as an organizer to put them in.

 

Drawer slides never go bad. Neither do drawer pulls and other similar hardware.

 

Sandpaper and other consumables are a good bet, too.

 

I'd advise just mindlessly roving the store like a hungry person looking for groceries. Oftentimes I find that taking the time to just mosey frees my mind to notice and remember, "Oh, yeah! I needed one of those."

20 minutes ago, Denette said:

Clamps, clamps, clamps. Parallel clamps, especially.

As long as you know that you're spending a lot more on these than you have to...50% off Jet parallel clamps most Black Fridays...if you can click the buy button fast enough before they're sold out.

I don't think I would ever just buy things for the sake of buying them (to save 10%).  I like to have some materials and supplies stocked, but I wouldn't load up on stuff just to have it around.  I wouldn't want to store it.

  • Author
24 minutes ago, Pug said:

I don't think I would ever just buy things for the sake of buying them (to save 10%).... I wouldn't want to store it.

Or have my money invested in it waiting for a "return".  

After the initial  "Oh Boy a deal" reaction I am trying to use a little more common sense:
Is this something I was going to buy sooner or later.  
Is it a version of that something that I would be happy to own.
At 10% off does this price make sense.

For example I would love a Sawzall and I have needed one... ten years ago... which I borrowed from a neighbor...  who still lives there... and still has a Sawzall.  
(Still if you were looking for that perfect birthday gift). 

Thanks, great suggestions, all.  For me, I can't justify more clamps (I need to come up with some projects that justify the clamps I already have), and my shop maybe well lit, but suggestions all worth considering.  

I have walked the aisles as suggested and here is another observation, not every store has the same merchandise in stock.  So when you do go for the "spree"  you have to pick the store that has all the items you want.  

Right now my shopping list is looking like:
Rigid sander
Milwaukee cordless drill
Roller stands (if I see something I like)
2x4 MDF panel
Sand paper on some other supplies.  

I've got till the end of May to pull the trigger on this.  

10 hours ago, Eric. said:

As long as you know that you're spending a lot more on these than you have to...50% off Jet parallel clamps most Black Fridays...if you can click the buy button fast enough before they're sold out.

I bought that year before last and I gotta say I'm not pleased with Jet. They are super hard to adjust. So count me out of that stuff I think. Plus sales are never a sure thing, like last year. I bought my first Bessey parallel clamp last week and am hoping that will be my new awesome sauce. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.