Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Walnut Sculpted Rocker

Featured Replies

  • Popular Post

Decided to throw in my pics on the progress on my Maloof build.  This has been a dream project of mine ever since I saw one at a woodworking show.  I know Andyg is also building one so I figured we could share our successes and failures!  I got my wood from Bell Forest and they send you pre-cut lengths so you are pretty much stuck with the wood selection you get so I was a bit limited on grain matching.  I think I will try to get 8' pieces for my next one!  Here is where I am at so far, pics are in a backwards order!  This is a fantastic project, learning a lot of new skills. I had to build one of the back legs twice due to mangling one on the router table. I have not started sculpting yet, just basic stuff on the seat so far.

 

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

  • Replies 59
  • Views 12.6k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Cheeset202
    Cheeset202

    Worked off and on over the past 2 weekends focusing on sculpting the headrest and getting started on the body sculpting.  This is my first sculpting project and it is a little nerve racking as you div

  • Did some more work this weekend, was really hot this Labor Day holiday so mostly some 1/2 days in the shop.  We were also plagued with an incredible amount of smoke from forest fires in BC, WA, MT and

  • Cheeset202
    Cheeset202

    Just about finished with the body and arm sculpting, just need to shave down the profile of the front of the arm to the front leg.  Next up will be attaching spindles.  The body and arm sculpting has

Posted Images

  • Author

Ok so the pics didn't go in backwards, I am technically challenged when it comes to this type of thing!

Nice job!  Coming along awesome!  It truly is a fun project to build!

That's turning out to be a heck of a nice chair! Enjoy the build, cause the scraping and sanding takes days on this thing !

 

Sent from my SM-N910W8 using Tapatalk

 

 

  • Author

Yes I have the relatively easy parts done, now things will slow down with the sculpting, rasps, scrapers, hopefully I can get it close to symmetrical.  

  • 2 weeks later...

Looking good! You'll learn a lot building your rocker.

 

What are you using to sculpt your chair?

 

 

  • 1 month later...
  • Author

Hi Andy, sorry for the delayed response, busted my leg back on June 21 and have been away from the shop and woodworking since!  I have a few more weeks before I will be able to stand without the crutches so I can get my hands back to begin working on the chair again.  I have the Auriou rasps, Makita die grinder, wide assortment of grinding bits, various scrapers and sanding tools. Do you have any special shaping tools you would recommend?

  • 3 weeks later...
  • Author

Well, I finally got back in my shop today and started back up on the Maloof rocker build.  I fell from a ladder at work and broke both bones and tore 2 tendons in my lower right leg.  They put in a steel rod and screws and now 10 weeks later I am walking again, although with a limp!  Started doing the sculpting on the arms and I will post pics when they are completed.

23 minutes ago, Cheeset202 said:

Well, I finally got back in my shop today and started back up on the Maloof rocker build.  I fell from a ladder at work and broke both bones and tore 2 tendons in my lower right leg.  They put in a steel rod and screws and now 10 weeks later I am walking again, although with a limp!  Started doing the sculpting on the arms and I will post pics when they are completed.

Wow! So sorry to hear about your misfortune! I'm surprised you're back this soon!

  • Author
1 minute ago, Mick S said:

Wow! So sorry to hear about your misfortune! I'm surprised you're back this soon!

Yes I am as well, I think the use of a steel rod to stabilize the bone (4" break) makes a huge difference in recovery time, I was walking on the leg at 50% weight after 6 weeks, using a cane at 8 weeks and full 100% weight at 9 weeks.  The only downside is my right leg is now 5/8" shorter than the left so I will need to put wedges in the heel of my right shoe!  Skiing this winter might be a challenge!  Just glad I am back in my shop!

 

 

... The only downside is my right leg is now 5/8" shorter than the left ....

 

Doc was using a metric rule?

 

Glad you're up and around, even if a bit uneven! Be diligent about that wedged shoe, though. A friend at work has a similar situation from and old break, and back problems abound from that offset.

  • Author
  • Popular Post

Well, I did get started back up on the rocker today, started sculpting the arms but it got pretty hot by the afternoon so I will wait until the sun goes behind the mountains to start back up.  This is the first time I used the Auriou rasps they are a dream to work with!

image.jpeg

image.jpeg

Very nice! I agree on the rasps I used mine for the first time on my last project and couldn't believe how fun they were to use.

1 hour ago, Cheeset202 said:

This is the first time I used the Auriou rasps they are a dream to work with

 

52 minutes ago, pkinneb said:

Very nice! I agree on the rasps I used mine for the first time on my last project and couldn't believe how fun they were to use.

The first time you use them, how much they cost sort of disappears in to the background.

  • Author
  • Popular Post

Got the arms done, moving onto seat refinement and spindles!  Made a small mistake with the die grinder and got to close to my guide marks where the front arms attach, should be an easy repair and may disappear when I sculpt the joint.

 

image.jpeg

image.jpeg

image.jpeg

image.jpeg

  • Author
  • Popular Post

Did some more work this weekend, was really hot this Labor Day holiday so mostly some 1/2 days in the shop.  We were also plagued with an incredible amount of smoke from forest fires in BC, WA, MT and ID, so thick you couldn't see the mountains. Picture is the sun being blocked by the smoke.  We need rain bad!  Did some more shaping on the seat (curve on back and sides, drilled spindle holes) and got the spindles cut out.  I will be spending next weekend sculpting the spindles, big job!

 

image.jpeg

image.jpeg

I just posted in another thread that I think this is the most labor intensive part of the build.  They're looking great!  

Looking really nice.

We've got the smoke all the way down here in Santa Fe, NM. I went hiking with my daughter and SIL yesterday and our lungs were burning.

I need to start scrolling all the way down, I completely missed this. Great job so far, OP! I wish I had the nads to try it! All of you guys in that fire and smoke war zone, I hope it clears up soon for you. And a prayer to those brave souls fighting them! 

  • Author
11 minutes ago, K Cooper said:

I need to start scrolling all the way down, I completely missed this. Great job so far, OP! I wish I had the nads to try it! All of you guys in that fire and smoke war zone, I hope it clears up soon for you. And a prayer to those brave souls fighting them! 

Nowhere near the issues you faced in Houston with that terrible hurricane and unbelievable amounts of rain.  I have been following some of your updates on the forum and it looks like you faired ok compared to many, glad to see!   It now looks like Florida is about to meet the ravages of Irma!  The biggest disaster we face living in N Idaho is forest fires.  It has been one of the driest summers on record so everything is tinder dry.  We have no fires close to where I live just a lot of smoke from surrounding states and BC.

The Maloof rocker is one of my bucket list projects and I am enjoying the build tremendously, have made some mistakes along the way but that happens on most projects I do.  It is not as intimidating as it looks when you follow Marc's video instructions.  I wanted to learn sculpting and this project was the perfect choice.  

Marc is an incredible instructor and his vids are Hollywood quality. No saying that to kiss up! My bucket list varies from day to day, depending on what I dreamt about the night before. Varies from constructive to entertaining  ;)! Good luck on your build! 

  • Author

I noticed 2 of my spindles were much lighter in color, came from a piece that transitioned from heartwood to sapwood.  One is a spare but the other one will look strange when it is put in the chair so I found enough room on one of my rear leg scraps to make another spindle.  I know if if I left the lighter colored one in it would bug me every time I looked at the chair.  Started sculpting the front of the spindles using SeventyFix's method with the Spokeshave.  

 

image.jpeg

image.jpeg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.