Just Bob Posted July 9, 2017 Author Report Posted July 9, 2017 Thanks for all of the suggestions. I am going to go with a 3 point finish mower for the tractor. One less motor to maintain, and since my wife likes to drive the tractor maybe I can get her to do the mowing! After I replace the water pump. 1 Quote
Tom King Posted July 9, 2017 Report Posted July 9, 2017 I think it's a good choice is you have some rough ground, and slopes. Finishing mowers come with a side discharge, or a rear discharge. You're too far away for me to make a recommendation on brand. I've had really good luck with a store brand here made in Italy. It's about half the cost of major, well known brands, and the retailer-Agri-Supply, I'm sure gets more business from professional farmers than everywhere else put together in two states. I've run their stuff way more than it was ever intended for, and it still holds up. edited to add: Here's the brand I had, although I think the one I had was 102". Agri-Supply keeps all the parts in stock. I never broke a spindle on it, even cutting down young Pine and Sweet Gum seedlings with it: http://www.agrisupply.com/estate-mower-lift-type-rear-discharge/p/10361/ I've worn out tow sets of tines on this thing, and never replaced anything else. I did our whole eventing cross country course that's about a mile and a half long with it, and varies in width a lot, and a couple of pastures, and can't count the yards of houses i built in the 20 years I've owned it. I don't think you can kill one: http://www.agrisupply.com/caroni-tillovator-with-clutch/p/30266/ 1 Quote
Just Bob Posted July 10, 2017 Author Report Posted July 10, 2017 @Tom King Thanks Tom for great information! I am not familiar with the Coroni brand, my one worry would be part availability. The price is much better than anything I am seeing locally. That may offset the spare part worry. Quote
Tom King Posted July 10, 2017 Report Posted July 10, 2017 The place, Agri-Supply, that I bought it from keeps all the parts in stock, on shelves, in a giant store maybe twice, or three times the size of a Costco. The parking lot is always full of pickup trucks of all ages. I have no idea what is available on your side of the country, but I would think that there would be a place like this somewhere out there, unless there are no farms. Quote
Tom King Posted July 10, 2017 Report Posted July 10, 2017 I just did a google search for "caroni equipment washington state", and there were a bunch of hits: http://www.farmersequip.com/buy-parts/AGRIEASE-Part-C59006210-BLADE-CARONI-1274345/ and changing the search to include finish mower: http://www.nwimplement.com/ 1 Quote
wtnhighlander Posted July 10, 2017 Report Posted July 10, 2017 I ran a King Kutter finishing mower for several years. It is a widely availabke brand, and a decent piece of equipment, but the Coroni mowers I've seen have one very distinct advantage - they have seperate spindle drive belts for each blade, rather than one large belt that snakes around multiple pulleys. That belt was the worst problem I had with the mower. It broke easily if not tensioned exactly right, and was a major pain to replace. Quote
Pondhockey Posted July 10, 2017 Report Posted July 10, 2017 On 7/8/2017 at 10:33 AM, Tom King said: It's funny, NASA Goodard has one of the best mechanic shops I know of, and it's for the scientists doing the work themselves. All my friends who work there work on their own vehicles. I always thought that NASA thought that it would save employees' time away from work if they just provided them with a place that they could get their work done. They even have nice equipment for mounting and balancing tires. My friends can have an experiment running in the lab, with young attendants watching, and go work on their car or truck. Back in the day, the "old" Hewlett Packard Company had a machine shop in every location/Division and encouraged engineers to use it. Lots of us did; i didn't use it enough! Quote
Pondhockey Posted July 10, 2017 Report Posted July 10, 2017 On 7/8/2017 at 11:46 AM, sjeff70 said: You can't get new license plate tags in Missouri without passing a multi-point vehicle inspection and you can't pass with a check engine light that stays on. It's common to see vehicles with expired tags and maybe it's because they couldn't afford to get whatever is broke fixed. Yeesh, even I can fix a broken "check engine" light! Quote
Tpt life Posted July 10, 2017 Report Posted July 10, 2017 At 17 I blew up two of three gear boxes on a LandPride 17' batwing. The RPM on the old Ford 230 was not legible anymore and I did not limit to 1600 or whatever the deck asked for. The was a rude awakening. Came to mind with your comment Highlander. Quote
legenddc Posted July 12, 2017 Report Posted July 12, 2017 I never should have read this thread. Car wouldn't start today. Was just thinking I'd had good luck. Starter had to be replaced, figured I could do it, but didn't think daycare would be too pleased with me doing it there. Thinking it maybe time to replace the old car. Quote
estesbubba Posted July 13, 2017 Report Posted July 13, 2017 On 7/8/2017 at 9:07 AM, Eric. said: I had Toro commercial units when I owned a lawncare business. Good machines. SCAG is also good stuff. Dixie Choppers are a joke. Gravely's are like Grizzly's. Stick with Toro or Exmark and you'll be good. Hustlers are very popular around here and mine has been great for 8 years. Also heard good things about Scag and Exmark. I would get one with a welded deck and not a stamped deck. On 7/8/2017 at 9:07 AM, Eric. said: I had Toro commercial units when I owned a lawncare business. Good machines. SCAG is also good stuff. Dixie Choppers are a joke. Gravely's are like Grizzly's. Stick with Toro or Exmark and you'll be good. Hustlers are very popular around here and mine has been great for 8 years. Also heard good things about Scag and Exmark. I would get one with a welded deck and not a stamped deck. Quote
sjeff70 Posted July 15, 2017 Report Posted July 15, 2017 I'll never get a Toro again. Thing was hard to start from day one and they wouldn't honor the 'will start within 2 pulls guaranty'. Had to take it in every year to get the carb cleaned. My new Honda has been great but if I had it my way I'd have a sand lawn. My neighbors dogs would probably like it better that way anyway. 1 Quote
Eric. Posted July 15, 2017 Report Posted July 15, 2017 35 minutes ago, sjeff70 said: if I had it my way I'd have a sand lawn Same. Every year I do a little landscaping, and every year I have a little less grass. Eventually I aim to eliminate it completely. I'd rather mulch once a year than maintain that crap every week. Besides, the cool season grasses that we try to grow here are totally wrong for our climate. They're really only happy a few months out of the year...the rest they're either dormant or require a million gallons of water to keep green. It's stupid. Honda push mowers are the best out there for residential use. That's what I have now. But in the commercial world, Toro and Exmark are right at the top. 1 Quote
sjeff70 Posted July 16, 2017 Report Posted July 16, 2017 1 hour ago, Eric. said: Same. Every year I do a little landscaping, and every year I have a little less grass. Eventually I aim to eliminate it completely. I'd rather mulch once a year than maintain that crap every week. Besides, the cool season grasses that we try to grow here are totally wrong for our climate. They're really only happy a few months out of the year...the rest they're either dormant or require a million gallons of water to keep green. It's stupid. Honda push mowers are the best out there for residential use. That's what I have now. But in the commercial world, Toro and Exmark are right at the top. Yes sir. Yea amazing how that works, residential gets the cheap stuff. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.