Recommended Posts

Posted

I can picture a lawn tractor heading skyward from a massive explosion under the deck !  Sometimes a thought like that in the back of my mind helps me get through the day. 

Somedays your the pigeon, somedays the statue.......

I'd offer to help but I have to work on my lawn tractor this weekend, so I completely understand.  

Hang in there, we're rooting for you !

 

  • Like 2
Posted

Don't feel bad.  I have spent almost $4K on my 2006 Honda van and still need to replace the U joints (?) in the front wheel drive.  Never buy another Honda plus the dealer isn't the greatest.  BTW, Paid about $12K for the $%^&.

Posted
1 hour ago, Tom King said:

So it goes, but I take great pleasure that I haven't made a truck payment in over 16 years.  My method of financing vehicles is to make one payment, and drive it until it drops.

My injectors on the Duramax lasted 13 years, and 230,000 miles, so I didn't complain too much.

I hope everything runs troublefree for you for a good while, once you get all the hitches sorted out.

I refuse to make payments, if I can't afford to pay cash, I fix it.  My truck is 17yrs old and this is the first major work it has needed.  Plus to replace it with an equivalent truck would cost 65k +.  I really don't mind working on my vehicles, I was whining because I could.  

Now does anybody know anything about zero turn mowers?  I have to replace the mower, it is really screwed.

  • Like 1
Posted
Just now, Just Bob said:

Now does anybody know anything about zero turn mowers?  I have to replace the mower, it is really screwed.

I had Toro commercial units when I owned a lawncare business.  Good machines.  SCAG is also good stuff.  Dixie Choppers are a joke.  Gravely's are like Grizzly's.

Stick with Toro or Exmark and you'll be good.

  • Like 1
Posted
1 minute ago, Eric. said:

I had Toro commercial units when I owned a lawncare business.  Good machines.  SCAG is also good stuff.  Dixie Choppers are a joke.  Gravely's are like Grizzly's.

Stick with Toro or Exmark and you'll be good.

Thanks, I am between Toro and Kubota right now.

Posted
14 minutes ago, Just Bob said:

 

Now does anybody know anything about zero turn mowers?  I have to replace the mower, it is really screwed.

Just wondering how much you want to spend. The price of the zero turns seems to very allot.

Posted
15 minutes ago, mat60 said:

Just wondering how much you want to spend. The price of the zero turns seems to very allot.

I'm in the 3800 to 4500 range, I have a little over 4 mow-able acres but some of it is pretty rough.  I am still not sure about a zero turn.  

Posted

What Eric said is just what I here also.    My lawn has some steep banks and the field is also rough also   . I mow with a mid size B7610 Kubota with a land pride 3 point 60in rear mower but its not fast.

  • Like 1
Posted

 

2 hours ago, Just Bob said:

I refuse to make payments, if I can't afford to pay cash, I fix it.  My truck is 17yrs old and this is the first major work it has needed.  Plus to replace it with an equivalent truck would cost 65k +.  I really don't mind working on my vehicles, I was whining because I could.  

Now does anybody know anything about zero turn mowers?  I have to replace the mower, it is really screwed.

I know exactly the feeling, and the plan.   I paid 38 for my dually, 17 years ago, and a new one now is 80.  If I can get by with a few hours, and a couple of grand a year, mine will roll for a while yet.

I think, when I get a little older, I will put a heat and air conditioning unit in the mechanic shop.  I avoid doing mechanic work when it's really hot, or really cold now.

For me, it's a time thing, as far as mecahinc work.  There is no one around here that does it that you don't have to wait for an appointment.  One afternoon, and the next morning working on the truck last week, and we were back making money the afternoon of the second day, and the only time I spent inefficiently was the 7 minute ride to the parts store-twice.

What's wrong with the zero-turn?   Have you considered a tractor and finish mower?  My tractor is down until this Fall, but a friend loaned me an old MF with cab and air conditioning, and a 15' batwing, so I'm not in a hurry to tackle my tractor this Summer.  I just came in from clipping the pastures this morning, and don't even need a shower.

It's funny, NASA Goodard has one of the best mechanic shops I know of, and it's for the scientists doing the work themselves.  All my friends who work there work on their own vehicles.  I always thought that NASA thought that it would save employees' time away from work if they just provided them with a place that they could get their work done.  They even have nice equipment for mounting and balancing tires.  My friends can have an experiment running in the lab, with young attendants watching, and go work on their car or truck.

  • Like 2
Posted

You can't get new license plate tags in Missouri without passing a multi-point vehicle inspection and you can't pass with a check engine light that stays on.  It's common to see vehicles with expired tags and maybe it's because they couldn't afford to get whatever is broke fixed.  

Posted
4 hours ago, mat60 said:

What Eric said is just what I here also.    My lawn has some steep banks and the field is also rough also   . I mow with a mid size B7610 Kubota with a land pride 3 point 60in rear mower but its not fast.

Finish mower or brush cutter?  I have the same tractor with the LP brush cutter, but it is useless on the fine grass.  If I went with the finish mower I would have go with a 48" because I have some really tight spaces to mow.   And I would probably have to take the front bucket off.  Still it is a good option.

Posted

I have a 7' rotary cutter, like a Bushog but made by Hardee, with two tailwheels.  I fabricated a door on the back that I can open to sharpen the blades with a 9" sidegrinder.  The two tailwheels, and sharp blades let me cut as close and pretty as I used to with a finish mower.   I sold the finish mower soon after I bought this cutter   With a single tailwheel, a rotary cutter is also a finish grader on humps in the ground.  The two tailwheels make a Big difference, and I can still cut pretty rough stuff with the HD cutter.

I don't know how small they make them with two tailwheels.

The rotary cutter has a big "stump jumper" dish, with two loosely slinging blades that can bounce off of anything it can't cut.  A finish mower has spindles and blades like a regular riding lawnmower, and something will break, rather than bounce off like a rotary cutter.  With the two widely spaced tailwheels, you get the best of both.

 

  • Like 2
Posted
9 hours ago, wtnhighlander said:

All else being equal, a zero turn radius mower will eat grass twice as fast as a tractor, but its a one-trick pony. And if your land is rough, look for a mower with suspension. Rough ground will beat you and the machine to pieces at those higher speeds.

All true.  If your lot isn't well graded this is good advice to take seriously.  I had a couple large properties that I had to ultimately give up because it was just murder on my machines and my body.  Z-turns like smooth turf.

Posted

I got a 60" hustler zero turn this year. Lots to mow. My ground is not smooth and I've run the crap outa it. Suspension could be better. Seems like a good machine. I'm hoping it last a good long time. You can cover a lot of ground with a good zero turn. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   0 Members, 0 Anonymous, 35 Guests (See full list)

    • There are no registered users currently online
  • Forum Statistics

    32k
    Total Topics
    437.5k
    Total Posts
  • Member Statistics

    26,007
    Total Members
    3,644
    Most Online
    FurniCore
    Newest Member
    FurniCore
    Joined