Popular Post SawDustB Posted August 30, 2017 Popular Post Report Posted August 30, 2017 I'm not sure if this warrants being in here, but this was a fun little project last weekend. I've had a couple of Dubuque hand screw clamp kits kicking around for a year and a half (I think they were a Christmas present) and rather than do anything else productive, I figured I'd make them. They're pretty simple, with the most time consuming part being drilling the angled holes to allow the threaded rods to pivot. These are all scraps from my Roubo (maple and sapele), with obviously some laminations on both clamps. I put a single coat of Tried and True varnish oil on just to make them easier to clean. Anyway, I'm pretty happy with the end result. 12 Quote
mat60 Posted August 31, 2017 Report Posted August 31, 2017 The small projects are fun. They came out nice. 1 Quote
Ronn W Posted August 31, 2017 Report Posted August 31, 2017 Nicley done. Don't hide them away in a drawer they belong on the wall. 1 Quote
pkinneb Posted August 31, 2017 Report Posted August 31, 2017 Those turned out really nice!! FWW had an article not to long ago about the uses and several video's they have show them in use so I have found myself using them more and more over the last year. 2 Quote
SawDustB Posted August 31, 2017 Author Report Posted August 31, 2017 Thanks guys. They've got a spot on my clamp wall for now, but I may find a spot on the work bench base for them. I saw that FWW article, and it had gotten me thinking about them again. Quote
wtnhighlander Posted August 31, 2017 Report Posted August 31, 2017 Really nice clamps! I have on my to-do list to make a couple with 'extended reach' jaws. 1 Quote
Marmotjr Posted August 31, 2017 Report Posted August 31, 2017 1 hour ago, Ronn W said: Nicley done. Don't hide them away in a drawer they belong on the shop floor, being put to heavy use. FYP Quote
shaneymack Posted August 31, 2017 Report Posted August 31, 2017 They look great, Brian! Where did you get the kit from? Sent from my SM-G950W using Tapatalk Quote
SawDustB Posted August 31, 2017 Author Report Posted August 31, 2017 They look great, Brian! Where did you get the kit from? Sent from my SM-G950W using Tapatalk Thanks Shane. The kits are for sale at Lee Valley. I don't think they're very expensive, maybe $15? This is the 7 inch kit, which lets you build a clamp with 10 inch jaws. Quote
RichardA Posted August 31, 2017 Report Posted August 31, 2017 I have a few of those, and they work really well. Quote
Chet Posted August 31, 2017 Report Posted August 31, 2017 Those look like a fun project. Nicely done Brian. 1 Quote
wdwerker Posted August 31, 2017 Report Posted August 31, 2017 I've got a couple Jorgensen hand screw clamps that are great and some less expensive ones that kinda suck. Are the threads on those kits so smooth you can quickly swivel and spin both handles to rapidly adjust them ? I love the contrasting wood laminated jaws . 1 Quote
SawDustB Posted August 31, 2017 Author Report Posted August 31, 2017 I've got a couple Jorgensen hand screw clamps that are great and some less expensive ones that kinda suck. Are the threads on those kits so smooth you can quickly swivel and spin both handles to rapidly adjust them ? I love the contrasting wood laminated jaws . The action seems to be pretty smooth on these. I haven't used them much, but when I was playing around with them I didn't see any problems. I wasn't going to do contrasting jaws originally, but after squaring up the sapele it wasn't going to be big enough by itself. At least this way it matches the bench. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.