Popular Post lewisc Posted October 6, 2017 Popular Post Report Posted October 6, 2017 A while back, my wife purchases these boxes for various things around the house. Two of them were stacked near the doors for keys, wallets, sunglasses and the like to be put when we came in the house. I got used to them but always wanted to change them. I found a table that I liked on the web and went for it. The timber is Victorian Ash, finished with Danish Oil, Wipe on Poly and a wax polish for the top (http://www.timberbits.com/traditional-wax-250ml.html). I was watching the Guild shaker table videos and putting effort into the timber selection. One unhappy moment occurred when I was installing the Z clips to attach the top. I grabbed screws that were too long and didn't notice until two of them had been driven in. It's a shame because the top has a nice bit of ripple. For now, I've rubbed a coat of wax into the top and polished on low speed with the ROS and 1200g paper. The screw holes were filled in and the wax left a nice feel. It doesn't look too bad but one day I'll replace it when I can find another nice piece of timber. 8 Quote
Chet Posted October 6, 2017 Report Posted October 6, 2017 Nice looking table Lewis and with a well place basket no one will see the accident with the screw holes. Great work. Quote
RichardA Posted October 6, 2017 Report Posted October 6, 2017 I like it. It has a shaker feel to it. Well done. Quote
Coop Posted October 6, 2017 Report Posted October 6, 2017 Nah, you'll always have that table, or I would. Not only does it look good, it will help you remember mistake. That is some neat looking wood. It's a shame you had to screw it up with that damn screw! Quote
Ronn W Posted October 6, 2017 Report Posted October 6, 2017 Too bad about the screws - like none of us has ever done something like that. It's a keeper. I like it. Quote
JosephThomas Posted October 6, 2017 Report Posted October 6, 2017 I have a few things around the house where I never attached the top out of fear that would happen to me...the tops are heavy enough that I've gotten away with never fixing the problem Nice work though! 1 Quote
wdwerker Posted October 6, 2017 Report Posted October 6, 2017 I had a guy working with me many years ago who was bad about not checking screw lengths. I cut the tip off of a screw and ground the cut perfectly flat. When he was screwing a top in place from underneath I waited until I heard the screw bottom out and yelled " oh crap ( or something along those lines ) " He bashed his head crawling out from the cabinet and was so apologetic when he saw the screw tip. I picked up the tip and said " I bet you check the screw lengths closer next time " 1 1 Quote
lewisc Posted October 6, 2017 Author Report Posted October 6, 2017 Thanks. It’s one of those things that I’ll have good intentions about replacing but the basket covers it and I’ll most likely forget about it. The most difficult thing about this one is keeping those crates from sneaking back. She’ll get used to it. Quote
gee-dub Posted October 6, 2017 Report Posted October 6, 2017 Very nice little table. Beautiful material. I’m sure you’ll enjoy that one for many years. Quote
woodbutcher74 Posted October 6, 2017 Report Posted October 6, 2017 11 hours ago, lewisc said: Thanks. It’s one of those things that I’ll have good intentions about replacing but the basket covers it and I’ll most likely forget about it. The most difficult thing about this one is keeping those crates from sneaking back. She’ll get used to it. You could sneak those crates out to the shop and make them into something else. Quote
Popular Post lewisc Posted October 6, 2017 Author Popular Post Report Posted October 6, 2017 7 hours ago, woodbutcher74 said: You could sneak those crates out to the shop and make them into something else. Ashes come to mind. 1 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.