Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Wife Gave Blessing for Sawstop at Christmas!!

Featured Replies

YES!!!!!!

 

The setup I am thinking of:

PROFESSIONAL SAW$2899

* Prices do not include shipping or taxes.
SAW
PROFESSIONAL$2299
POWER
3HP 1PH 230V 
PCS31230

$430
FENCE/RAIL/TABLE
36" T-GLIDE
-TGP236-PCS

$170

A few questions though ... 

1) Does Sawstop ever go on sale? I dont recall it but I do think I remember seeing them adding extra accessories sometimes.

2) I am not sure I can add in the mobile base with the price. That may be a later on purchase ... is the ICS mobile base worth the extra $328?

3) Is there one place better to order from than another? Since it will be ordered online I have plenty of options.

4) Anything else I am missing or should think of?

  • Replies 56
  • Views 13.4k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Bushwhacked, Congrats!!!!!!!! Will you ask her if I can have one too?

  • Well that’s a feature ...    also called woodcraft today. They said they normally keep 2 of each model in stock and they order so much that sawstop does not charge them the $250 shipping per

  • Here is my 2 cents on the subject. First a little background, I purchased a PCS with 36" T-Glide fence 220 3hp in March 2017 during the promotion. I received the overarm dust collection as my free acc

Posted Images

They don't go on sale, but in May they do a  special when you by the saw they give you a choice of free mobile base or the over arm dust system for the blade guard.

4 minutes ago, bushwacked said:

is the ICS mobile base worth the extra $328?

only if you move the saw a lot.  If it is going to be mostly stationary get the other one.

 

6 minutes ago, bushwacked said:

Is there one place better to order from than another?

SawStop has their prices locked up so you are not going to find it cheaper one place over the other so shop for free shipping.  I have always been happy with Acme Tools for large stuff and they have free shipping any time your order is over $199.

Same saw I have. If you are going to move the saw around the ICS base is worth it because you can move any direction without doing 3 point turns. Get the base with the saw, you don't want to turn it over later to put the base on.

  • Author
1 minute ago, B1rdhunter said:

Same saw I have. If you are going to move the saw around the ICS base is worth it because you can move any direction without doing 3 point turns. Get the base with the saw, you don't want to turn it over later to put the base on.

Oh so it’s not one of those just sit on it moveable bases? It’s screwed in or something?

Its a permentant fixture but when you are in place the saw sets right on the ground, the wheels sort of flip up out of the way.  Way nicer set up then normal mobile bases.

I got mine from Lee Valley with the free mobile base. I wanted the ICS base, so they exchanged the PCS for the ICS base & I paid the difference. For me it was worth the cost because I have to do battle with 2 cars in my shop. The ICS is soooo smooth.

The ICS base is built like a cradle so the saw sits in it. there are a couple of screws that keep things from shifting. When the wheels are retracted, the saw is basically sitting on the floor. There is a hydraulic piston that actuates the wheels.

3 minutes ago, drzaius said:

I got mine from Lee Valley with the free mobile base. I wanted the ICS base, so they exchanged the PCS for the ICS base & I paid the difference. For me it was worth the cost because I have to do battle with 2 cars in my shop. The ICS is soooo smooth.

The ICS base is built like a cradle so the saw sits in it. there are a couple of screws that keep things from shifting. When the wheels are retracted, the saw is basically sitting on the floor. There is a hydraulic piston that actuates the wheels.

Went down to look at mine and refresh my memory. No turning over but it's easier to do before the rails and extra cast iron is attached. it is nice to be able to roll around with one hand.

The PCS is fine for a lot of people but be warned it is the kind where some wheels don't turn, so it can be difficult to "steer" around in a tight space.  The ICS also technically holds more weight so it might be better if you plan to add a heavy router wing or a storage cabinet under the wing, etc etc.  I will say it's preferable to have the base present before you assemble the entire thing. Doing it last makes for a heavier lift.

The overhead DC is nice too, but it's not cheap. 

I forgot to add that my ICS base was back ordered & I was too impatient to wait, so I set up the saw without the base. If you have the base at setup, it's super easy. Just tip the saw up into the base. I used a little Warn electric hoist to lift the saw into the base later. Took about 5 minutes.

Just now, drzaius said:

I forgot to add that my ICS base was back ordered & I was too impatient to wait, so I set up the saw without the base. If you have the base at setup, it's super easy. Just tip the saw up into the base. I used a little Warn electric hoist to lift the saw into the base later. Took about 5 minutes.

Yes, I had the same backorder problem, so +1 for getting it before setup of the saw.

Everybody is correct, if you are going to be moving the saw regularly get the better base.  I got the less expensive one but my garage is my shop and the only time I have moved the saw was in a couple of shop reorganizations maybe three times otherwise it doesn't move.

  • Author

I have talked to my wife and she agrees no parking in there unless our wonderful Texas pineapple size hail comes through. So maybe I will be moving it about 3-4 times a year during storm season. So maybe that will Be Worth a good base? 

 

I don’t plan on adding a router to the wing. When I build a cabinet for the saw wing it will be on its own and not connected just for that reason. 

Is the $200 really worth it for the overarm dust control? I was thinking about adding later possibly after I get an idea of how much dust is being kicked up in my face. 

1 hour ago, bushwacked said:

Is the $200 really worth it for the overarm dust control?

At the risk of hearing from the safety patrol.  I have the guard for the dust collection overarm and had it hooked up to my own system DC with out their arm and it work well but I found the guard in the way more often then not and every time I had to remove the guard I had to disconnect the DC.  I got tired of that so I no longer use it or the guard.  The saw does a pretty good job on its own with the exception of when you trim the edge of a panel but that is with all table saws.  I think SawStop has some nice design to the under table dust connection that makes it pretty efficient compared to other saws.  Everything that i am saying is based on a dust collection system not a shop vac.

Couple of points:

1. Congratulations

2. I'm jealous.

Seriously, you know you're gonna want both so it's which to get first.  If it were me I wouldn't want to have to lift the machine to get the mobile base underneath, and the dust collection will be an easier wife sell later.  

  • Author
7 minutes ago, Chet said:

At the risk of hearing from the safety patrol.  I have the guard for the dust collection overarm and had it hooked up to my own system DC with out their arm and it work well but I found the guard in the way more often then not and every time I had to remove the guard I had to disconnect the DC.  I got tired of that so I no longer use it or the guard.  The saw does a pretty good job on its own with the exception of when you trim the edge of a panel but that is with all table saws.  I think SawStop has some nice design to the under table dust connection that makes it pretty efficient compared to other saws.  Everything that i am saying is based on a dust collection system not a shop vac.

Is that the plastic piece on top of the saw? When does it get in the way? Like when cutting an 8/4 board or what? 

10 minutes ago, bushwacked said:

Is that the plastic piece on top of the saw? When does it get in the way? Like when cutting an 8/4 board or what? 

It gets in the way if you are making a thin cut, like it sticks out an inch or 2 to the side so you can't move the fence any closer to the blade than that.  I'm making up numbers, but you get the idea. It also gets int he way if you do a non-thru cut obviously, you have to switch to a normal riving knife for that.  Whether it's worth the cost is hard to say. It's not cheap. Maybe go without at first and see if the DC is adequate without?  Easier to add this later, as others said above. 

As for the mobile base...it's totally up to you whether it's worth $130 extra to get the better base. Sounds like you need one of the 2 for sure, since you'll be moving it a couple times per year. 

 

13 minutes ago, bushwacked said:

Is that the plastic piece on top of the saw? When does it get in the way? Like when cutting an 8/4 board or what? 

Yes and it gets in the way when working with thin stock both the piece between the fence and and the off cut can get caught under the guard.

  • Popular Post

Bushwhacked, Congrats!!!!!!!! Will you ask her if I can have one too;)?

Here is my 2 cents on the subject. First a little background, I purchased a PCS with 36" T-Glide fence 220 3hp in March 2017 during the promotion. I received the overarm dust collection as my free accessory. I purchased mine from HWW. I also purchased the ICS base from Acme Tool at the same time don't recall why I bought that from them instead of HWW but I did.

Regarding the base - The ICS base is indeed expensive at first glance but what you have to remember is three pumps and you can spin that baby on a dime. In my shop that is huge I do not want to have to go back and forth to get it where I want it even though I only move it once a year at most.

Regarding the dust collection I got it with the intent of selling it which I did CL for $150 within a few days of posting. Although its probably great I do not like or use anything that obscures the blade and it does. As Chet says may not make the safety police happy but telling you my opinion you do what works for you.

The free accessory is the only "sale" I am aware of and it happens in March or least it has for the last several years.

Regarding where to by I went with HWW because I didn't have to pay tax so it was cheaper overall for me. They were great to work with and shipped out and was at my house in MN in like five days which caught me off guard LOL

I remember why i bought the ICS base at acme now it was because the shipping was more than the tax to pick it up locally

Hope this helps.

 

BTW you won't be sorry this is a great saw!

 

  • Author
3 hours ago, K Cooper said:

Bushwhacked, Congrats!!!!!!!! Will you ask her if I can have one too;)?

Garage is always open ... well when the garage door works :( 

3 hours ago, pkinneb said:

Here is my 2 cents on the subject. First a little background, I purchased a PCS with 36" T-Glide fence 220 3hp in March 2017 during the promotion. I received the overarm dust collection as my free accessory. I purchased mine from HWW. I also purchased the ICS base from Acme Tool at the same time don't recall why I bought that from them instead of HWW but I did.

Regarding the base - The ICS base is indeed expensive at first glance but what you have to remember is three pumps and you can spin that baby on a dime. In my shop that is huge I do not want to have to go back and forth to get it where I want it even though I only move it once a year at most.

Regarding the dust collection I got it with the intent of selling it which I did CL for $150 within a few days of posting. Although its probably great I do not like or use anything that obscures the blade and it does. As Chet says may not make the safety police happy but telling you my opinion you do what works for you.

The free accessory is the only "sale" I am aware of and it happens in March or least it has for the last several years.

Regarding where to by I went with HWW because I didn't have to pay tax so it was cheaper overall for me. They were great to work with and shipped out and was at my house in MN in like five days which caught me off guard LOL

I remember why i bought the ICS base at acme now it was because the shipping was more than the tax to pick it up locally

Hope this helps.

 

BTW you won't be sorry this is a great saw!

 

Thanks for all the info. Yes it sounds like that plastic piece just needs to come off or not be installed in first place. 

I’m afraid if I got behind a ts larger than the 1/3 h.p. peddle operated one that I have, I would constantly get shrapnel in my gut. 

6 hours ago, bushwacked said:

So maybe I will be moving it about 3-4 times a year during storm season. So maybe that will Be Worth a good base? 

The important difference between the 2 bases is that the ICS has 4 swivel casters while the PCS has fixed & swivel casters. So just look at how much maneuverability you need.

 

4 hours ago, Chet said:

 I have the guard for the dust collection overarm and had it hooked up to my own system DC with out their arm and it work well but I found the guard in the way more often then not and every time I had to remove the guard I had to disconnect the DC.  I got tired of that so I no longer use it or the guard.

Chet, I also have my guard connected without the arm. I dropped a 2" flex from the OH duct & use an adapter to connect with the guard. When I need to remove the guard, I just unplug the flex & hang it over the blast gate. Only adds about 5 sec to the process

As has been said, ICS is well worth the upgrade. The ability to turn that thing on a dime and do so with just your fingertips is amazing.

 

ACME definitely had the best shipping prices and no sales tax for me was a big plus. 

  • Author

I was looking at acme ... is special handling charge the norm? It’s not really free shipping with that haha  

mvrudy.png

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.