Recommended Posts

Posted

A new Sawstop will be on the way as soon as my current project finds its way into the house. It will be in a basement shop. I have outside access and can drive within a few feet of the door. There is one concrete step down and in to the basement.

My question is, should I pick the saw up in the bed of my truck or would putting it on a trailer be a better idea? I will have some help getting it in the shop and I plan on unloading all the extras before moving the saw, just not sure how harry it would be to move the main cabinet down off the back of the truck.

Anyone who has done this have opinions?

Posted

I did it in the back of a Subaru Forester. I think the issue with a truck bed is how high off the ground is it? If it is a small to midsize truck with none of the add-ons that jack the trucks up then you are fine. If it's jacked up enough to go over a bolder at 60mph then I would want a trailer if it's an option. Loading and unloading with an extra hand is pretty important and makes the whole process a lot easier. 

Congratulations on your new saw!!

Posted

Here's my story, or maybe lack of a story. I picked it up at Lee Valley with my pickup truck, backed it up my driveway, & slid it off the back with my son's help. I unpacked & assembled it myself. They have the saw packed in a rather ingenious way that makes it very easy to assemble.

Having to get it into the basement adds a level of effort, but with a little help & some straps it shouldn't be to hard to slide it down the steps & into the shop. Do not uncrate it first though. Just do it all in one piece.

Posted

I rented a u-haul van to bring mine home... The van bed was 18-24" off the ground... I built a ramp using a couple 2x6's and some 2x4 cross braces... strapped it to the back of the van so it'd say in place and then pushed the saw out of the back and down the ramp and onto a 4 wheeled moving dolly.

I'd be more concerned about this if it was up higher...Most new trucks have beds around 36" off the ground.   

One thing I learned... don't bother opening up the big box to remove stuff.   There isn't that much you can remove, and opening up the box makes it less structurally sturdy.   Leave it all strapped together.   The cast iron sides, fence and such are in separate boxes.

My move was made more difficult because the bottom slats on the pallet had broken during transport.   So I had the whole thing tipping back and forth on the center slat.

Posted

Personally I'm an advocate of renting a lift gate truck.  Given the value of the saw it's worth it in my mind just to remove one more worry.

I recently moved a big dust collector that way and put some pictures in bushwacked's thread:

From what you describe I don't know that pallet jacks are going to be that useful.  If there is only a single step down to your shop sliding the box down hill might work.  

Another idea that someone floted to me that sounded only half crazy was to use several PVC pipes as rollers.

Posted

I moved my saw (3HP PCS) into my basement shop - through a typical basement bulkhead door and down about 8 steps - with no issues.  I picked up the entire order on my utility trailer; backed the trailer up to my garage and slid the whole box off the trailer into the garage; unlike drzaius, I uncrated the whole thing and moved it down piece by piece. I moved the main part of the saw on a hand truck - wrapped in a moving blanket and flipped upside down an resting on a scrap of plywood (to protect the top) so it sat more securely on the handtruck, secured with several straps, and wheeled it the 25' or so to the basement steps; then a friend helped me get it down slowly and carefully one step at a time.  I was surprised at how quickly and easily it went.  Definitely have someone there to help you, no matter what your method.

Posted
21 minutes ago, bleedinblue said:

This seems incredibly cheap for what it is, but would make quick work of unloading and loading.  

Find an easy solution for dragging a 500 lb machine through a yard by yourself and I'm all ears. 

Hey @bleedinblue, your link just took me back to the OP.  Was that what you intended?

And +1 to Jfitz.  One or even two assistants if you can.  The only reason I did my move on my lonesome was because my assistant got called into his work that morning.  

Posted
1 hour ago, Mark J said:

Hey @bleedinblue, your link just took me back to the OP.  Was that what you intended?

And +1 to Jfitz.  One or even two assistants if you can.  The only reason I did my move on my lonesome was because my assistant got called into his work that morning.  

Crap, no....try this big link that I'm not likely to screw up... 

https://www.sportsmansguide.com/product/index/powerbuilt-2-ton-shop-crane?a=1944294&pm2d=CSE-SPG-15-PLA&utm_medium=PLA&utm_source=Google&utm_campaign=CI&gclid=Cj0KCQiAus_QBRDgARIsAIRGNGgTy5EkiLwKQVyUGLmRLuWIBdOZa6KcuQoOMBX4JBZrd3nCTTd8d3waAm92EALw_wcB

Posted
15 minutes ago, bleedinblue said:

Thats a great way to go.  Marc has one of these just for moving stuff around his shop.  I wish I had some place to store it when not in use.

Posted
2 hours ago, Jfitz said:

I moved my saw (3HP PCS) into my basement shop - through a typical basement bulkhead door and down about 8 steps - with no issues.  I picked up the entire order on my utility trailer; backed the trailer up to my garage and slid the whole box off the trailer into the garage; unlike drzaius, I uncrated the whole thing and moved it down piece by piece. I moved the main part of the saw on a hand truck - wrapped in a moving blanket and flipped upside down an resting on a scrap of plywood (to protect the top) so it sat more securely on the handtruck, secured with several straps, and wheeled it the 25' or so to the basement steps; then a friend helped me get it down slowly and carefully one step at a time.  I was surprised at how quickly and easily it went.  Definitely have someone there to help you, no matter what your method.

I did pretty much this same thing when moving my new Grizzly into the basement and then back out again. Now I'm all rehearsed for when the real saw comes :rolleyes:

Posted (edited)
1 hour ago, pdacey08 said:

I did pretty much this same thing when moving my new Grizzly into the basement and then back out again. Now I'm all rehearsed for when the real saw comes :rolleyes:

So are you currently without a saw?? How sad!

 

Edit: Forgot you returned yours for a bad arbor (saw your reply in another post)....hope that gets resolved soon!!!

Edited by Jfitz
Posted

Wait.  First bushwacked and revjdhiatt and now pdacey08 are getting new Saw Stops!

What did I do to get on the naughty list?!  

...oh yeah, ... ahh, never mind. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 33 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined