Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Cutting Boards

Featured Replies

  • Popular Post

I know, it's a day early but, I'm taking the weekend off except for a good shop clean up!  Merry Christmas!

We usually see cutting boards this time of year and I'm usually guilty of making them for gifts as well.  This year, I decided to turn on the camera to show how I build them.  These will be end grain with the wavy lines.  There will be 2 videos for these so, the other one will be out after Christmas.  

Also, I'm learning new video software so, be kind to me ;)

 

 

 

  • Author
34 minutes ago, Woodenskye said:

Nice job Kev!  Noticed no hiccups with the new software. 

Unfortunately, I did find a hiccup..  There's some unneeded dead space at the end..  Lesson learned!

Thanks.

  • Author
1 minute ago, Woodenskye said:

What software are you using now?

Adobe Premier - I also switched to MAC

Another nice job, Kev. It's always a pleasure watching you work! Thank you!

Nice work Kev, looking forward to the next step. plus its always good to see your work flow and process, feed rate on the TS ect. i know its helped me and a bunch of others, thanks.

  • Author
8 minutes ago, Keggers said:

Another nice job, Kev. It's always a pleasure watching you work! Thank you!

 

5 minutes ago, treeslayer said:

Nice work Kev, looking forward to the next step. plus its always good to see your work flow and process, feed rate on the TS ect. i know its helped me and a bunch of others, thanks.

Thanks!  Makes putting it on video worth it!

Kev, The initial rip cut and glueing them back in the same order was to break up the grain pattern a tad? Also, can we assume you went to a circ saw to cross cut the board into sections, thus the burn marks on the ends? Great video as always!

  • Author
1 hour ago, K Cooper said:

Kev, The initial rip cut and glueing them back in the same order was to break up the grain pattern a tad? Also, can we assume you went to a circ saw to cross cut the board into sections, thus the burn marks on the ends? Great video as always!

I do the initial cut and keep them in the same order.  I do this to make smaller pieces to reduce the chances of warping or cupping.  I could have flip/flopped them as well but, chose not to.

As for the burns, yes.  I ended up going to the chop saw because the board was really flat with a good edge on it.  That's not typical with lumber fresh from the hardwood dealer so, I chose to leave the video clip in there of the way it really should be done for safety reasons.

So you cut the wide pieces and glued them back in the same order? I was a little confused late last night when I was watching it. 

 

Thanks for all the videos. I don’t know what it is about them, but I really like them and it’s always great to see them pop up in my YouTube subscription feed. 

  • Author
21 minutes ago, legenddc said:

So you cut the wide pieces and glued them back in the same order? I was a little confused late last night when I was watching it. 

 

Thanks for all the videos. I don’t know what it is about them, but I really like them and it’s always great to see them pop up in my YouTube subscription feed. 

Thanks.

On the initial glue up, yes, I kept them in the same order.  Helps with warping and cupping.  It also creates the cross lines so that the next glue up looks like small squares.  I could have altered them but, chose not to on these.  

  • Author

Finish showed up today...  Was getting concerned about getting these done in time!

So you’ll be up tonight to have them ready for tomorrow’s video and then under the tree? 

  • Author

Done, wrapped, and under the tree..  Cutting it a bit too close for my liking!

Awesome video!  Thanks for doing these!  Makes a newb like me feel like I can do this, and I will for next Christmas!

  • Author
11 minutes ago, SirNot said:

Awesome video!  Thanks for doing these!  Makes a newb like me feel like I can do this, and I will for next Christmas!

Thanks!  

I'll be doing an even simpler gift idea after the next cutting board video!

Thanks for the video Kev.  Is there an decent alternative to the drum sander?  I've been planning on making some, but the lack of the sander is holding me back.

  • Author
1 minute ago, Art said:

Thanks for the video Kev.  Is there an decent alternative to the drum sander?  I've been planning on making some, but the lack of the sander is holding me back.

Was actually giving this some thought as I was running them..  

If I didn't have the drum sander, I honestly think I'd build a small router sled and flatten that way before going to the ROS.  Would be an easy set up to toss together that could probably be done out of shop scrap.  Still more ROS work than you'd have starting with a DS but, would still be much faster than trying to do it all by sanding.

That makes sense.  I've got a full year to get that done, so it should work.

Thanks

 

  • Author
  • Popular Post

Time to finish these up!  Wavy lines, decorative edges, and salad bowl finish.

Sorry these weren't in time for Christmas!  Next week's video will be another quick and easy gift idea that works well in just about any home.

 

Thank you once again for a great video. I noticed the blade on your bandsaw was pretty narrow. What size is it? I only ask because I almost always run a 3/4" to 1" blade on mine.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.