Isaac Posted March 8, 2018 Report Posted March 8, 2018 I've shown some of the progress on this one in a separate topic (baby boat). I'm looking for some design suggestions here. All the pieces here are loose and unattached and roughly layed out, so I'm looking for thoughts on this design layout. I'll start with my first thought. 1. I like this layout because at the upper half, there is a gap between the fox and the wall, which, to me, makes the fox really stand out. 2. Here is the same layout but with a full height walnut back. 3. Here is the text tightened up (I would cut the board shorter). 4. Shorter with the full background. And this is what I'm thinking of for the coat pegs. Quote
Chestnut Posted March 8, 2018 Report Posted March 8, 2018 I like the first one the best but your kerning is terrible . I don't see why the pegs wouldn't work like that. except for coats that don't have a hood and the loop to hang them by is too small to fit over the dowel. Might want to try out the loops on some coats that you have and see how different ones work. Also try a sweater/sweatshirt. 1 Quote
RichardA Posted March 8, 2018 Report Posted March 8, 2018 Number 1, but bring the pegs in about an inch and a half from the ends. 1 Quote
wtnhighlander Posted March 8, 2018 Report Posted March 8, 2018 Yet another vote for option #1 1 Quote
Isaac Posted March 8, 2018 Author Report Posted March 8, 2018 Thanks for taking a look everyone. Number 1 is my favorite choice as well. I will proceed with that plane and start fine tuning the exact layout of the letters. Gotta get that Kerning just perfect, right @Chestnut? Quote
Chestnut Posted March 8, 2018 Report Posted March 8, 2018 I wish i didn't know what kerning was. The font i have to use for work has terrible kerning and i wish i as just blissfully ignorant. 1 Quote
gee-dub Posted March 8, 2018 Report Posted March 8, 2018 #1, bring outer pegs in and round the tips. My .02. 1 Quote
bradpotts Posted March 8, 2018 Report Posted March 8, 2018 Love the little fox! #1Sent from my iPhone using Tapatalk 1 Quote
Isaac Posted March 8, 2018 Author Report Posted March 8, 2018 1 hour ago, wdwerker said: Drill out the center of the "R " Yup, that is the plan. Just haven't gotten to it yet. Quote
Chestnut Posted March 8, 2018 Report Posted March 8, 2018 1 hour ago, WoodMan said: Nice fox! But what does it say? 1 Quote
wdwerker Posted March 8, 2018 Report Posted March 8, 2018 With the wider kerning it looked like the fox was relieving himself between the letters. 1 Quote
Popular Post Isaac Posted March 10, 2018 Author Popular Post Report Posted March 10, 2018 Here is the final product. It was a fun project, but took more time than anticipated, and hand sanding the letters was a bit tedious, so I'm happy to be moving on. The client was thrilled with it, so that was nice. 4 Quote
wdwerker Posted March 10, 2018 Report Posted March 10, 2018 Looks good and well proportioned. I use my Fein multimaster for sanding stuff like those letters. I've tried off brand abrasives but the black triangles that Fein sells work best. They also cost the most but they do a good job and last. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.