Recommended Posts

Posted
6 minutes ago, Chestnut said:

Does it make a stalled motor noise like it's trying to run but isn't able? If it doesn't then my guess is the motor protection tripped or something in the winding failed. I don't know if those are brushed motors or induction motors. Guess it's induction.

https://images.homedepot-static.com/catalog/pdfImages/fc/fcae9aa7-a336-455e-ad8a-4777c350ff92.pdf

 

it doesnt make any noise at all 

Posted

Maybe contacts in the pressure switch.  I have Husky air compressor (with 30 gallon tank) that I replaced all the controls on, after having multiple different problems with both the pressure switch, and regulator.   I doubt it's a motor problem with 2 years of light use.

Google     troubleshooting air compressor        and you will find all sorts of information.    There are quite a number of possible problems.

Posted
6 minutes ago, Tpt life said:

Please take no offense at this suggestion. My Cal Air loses no air after months of sitting. Make certain your tank is not pressurized. 

how do I make sure its not pressurized? 

Posted
2 hours ago, Tom King said:

Maybe contacts in the pressure switch.  I have Husky air compressor (with 30 gallon tank) that I replaced all the controls on, after having multiple different problems with both the pressure switch, and regulator.   I doubt it's a motor problem with 2 years of light use.

Google     troubleshooting air compressor        and you will find all sorts of information.    There are quite a number of possible problems.

hmm I'll look at it. how I had it was the switch was always on but had it plugged into a switch which plugged into the wall. easier to access this way but it means I wasn't really turning the switch of the machine on and off ever 

Posted

If the motor won't start after draining the tank the contacts in the pressure switch are the next thing to suspect. Cleaning those contacts might be easy or could be risky depending on your comfort level with electricity.

  • Like 1
Posted

Those are always the most embarrassing moments when it's just come unplugged or tripped a breaker. You check everything else first .  A compressor sharing a circuit will do this when it kicks on and another tool is already drawing a substantial amount of current.

Posted
16 hours ago, K Cooper said:

What is a Cal. Branded air tool? Here, we just let that mother run till it can’t anymore and replace it . 

In the OP he stated using a California Air tool. 

Posted
20 hours ago, treesner said:

hmm I'll look at it. how I had it was the switch was always on but had it plugged into a switch which plugged into the wall. easier to access this way but it means I wasn't really turning the switch of the machine on and off ever 

The pressure switch operates any time the pressure drops below whatever it's set at, to turn the compressor on.  It works a lot, and the cheap ones don't last that long.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 50 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined