Popular Post pkinneb Posted November 1, 2024 Author Popular Post Report Posted November 1, 2024 Didn't get as far as I had hoped today we had an early winter storm, heavy wet snow, and lost a tree across the driveway that needed to be dealt with. I was able to do the final glue up on chair one And also got chair two parts taped off 5 Quote
Mark J Posted November 1, 2024 Report Posted November 1, 2024 11 hours ago, pkinneb said: lost a tree across the driveway Any of it usable? Quote
pkinneb Posted November 1, 2024 Author Report Posted November 1, 2024 On 11/1/2024 at 8:39 AM, Mark J said: Any of it usable? Nope just a scrub tree. Quote
BillyJack Posted November 2, 2024 Report Posted November 2, 2024 I shared the build on Lumberjacks as someone was asking about blackening a finish. I hope you don’t mind me pimping the build/finish to new woodworkers… 1 Quote
pkinneb Posted December 31, 2024 Author Report Posted December 31, 2024 Second chair has its first coat of ebony stain Also after several delays, a cancelled order, and subsequent reorder via a different company I finally received my seat foam and batting today ...and after the compressed pkg was opened llol Next up another coat of stain and some cushion work. 2 Quote
fcschoenthal Posted January 1, 2025 Report Posted January 1, 2025 Is this upholstery going to be as elaborate as your other chairs? Quote
pkinneb Posted January 1, 2025 Author Report Posted January 1, 2025 On 12/31/2024 at 7:14 PM, fcschoenthal said: Is this upholstery going to be as elaborate as your other chairs? These will be a little more straight forward but will also require some sewing 1 Quote
Popular Post pkinneb Posted January 4, 2025 Author Popular Post Report Posted January 4, 2025 I was able to get a couple coats of ply on the second chair today and will start glue up tomorrow. The following has nothing to do with Woodworking but rather will be a high level on how I upholster the seats so if you interested great if not you may want to move on this will take a few posts and then I'll post the final pics when complete. First up I cut the seat bottoms. With the pattern you have to keep cognoscente of how things are running and its important to keep things as straight as possible. Using cutting boards like the one here is one way of doing this. Next I need to cut some strips for the piping I will use on the side panels. Cutting this on a 45 degree angle accomplishes two things. First the fabric will unravel less and second it helps on curves and corners as you will see in the coming photo's. I have a Sailrite 111 sewing machine which works well for a machine that cost similar to a large shop tool First up I change the from the standard foot to the piping foot. You can see in the second photo how the piping / cord will ride in the curved slot. Next I apply some basting tape. Using tape vs pins speeds things up greatly and keeps everything together while you sew. Then just sew it it up One done three more to go. As you can see here the piping wants to curl up when cut and sewn which is a good thing when using it on corners and curves. With that done I need to go and surf the web to see what direction the side panels should go. The boss and I are not on the same page...yet 5 Quote
JohnG Posted January 5, 2025 Report Posted January 5, 2025 On 1/4/2025 at 6:31 PM, pkinneb said: The boss and I are not on the same page...yet She is always on the right page 2 Quote
Popular Post pkinneb Posted January 5, 2025 Author Popular Post Report Posted January 5, 2025 On 1/4/2025 at 6:34 PM, JohnG said: She is always on the right page Normally yes but I take my projects very seriously On this one, after more research, I will be going the way I thought and hoping when done she agrees it looks good. I also hope she forgets about it when she sees the final product but just in case I'll only do one before seeing what she thinks. 2 2 Quote
Popular Post pkinneb Posted January 5, 2025 Author Popular Post Report Posted January 5, 2025 So a pretty frustrating day today but still made some progress... I started by making the side panel pattern. In the second shot I am doing a reality check with the seat base, with sewing you always have a seam allowance (for the sewing part) so you have to insure you add the allowance. With that done it was time to cut out the side panels for chair one. Enter mistake #1. I like to cut my sides at the same time thus if something is off its replicated identically on both sides. While that's a great idea when you are working with a pattern it doesn't work...facepalm! Luckily I had plenty of material and cut another one with the pattern going in the right direction. Had I not on one side the pattern would have gone up on the other down With that resolved it was time to sew the piping onto both sides of the center panel pretty straight forward Then it was time to sew the sides on. This always takes a minute because you sew inside out so making sure everything is correct before starting is a good idea. First side no problem On the second side I had it backwards after sewing the short end about 6" I realized the mistake and pulled it apart to resew it. I used clips to keep it in the correct orientation this time which helped for that and also because its getting thick on the seem so it also keeps things in alignment. and with that the first cushion cover is complete. Now onto the foam. This was so frustrating that I ordered a new tool LOL I have always cut my foam with a meat carving knife but this is the first time working with 4" foam and while it still cut it it was difficult to keep it straight due to the size and weight of the foam. Thus order for real foam knife was initiated lol I ended up cleaning the cut off square at the band saw, worked great Next I needed to shape the curve at the front of the seat and this is where I was really getting worked up. I was trying to cut angles with the carving knife but struggled to get a clean cut. With that mess now done I needed to clean it up and ultimately after trying sanders both power and hand decided I do not have what I need to get a result I can live with so added a $13 tool to the order that hopefully will help. Had to try it out regardless...the front will be smoothed out but you get the jest. Once cleaned up and stappled on I think this will be fine. Oh and by the way the boss was happy and didn't even notice I went with the sides as I had wanted 7 Quote
wtnhighlander Posted January 6, 2025 Report Posted January 6, 2025 Very nice! Good catch on the pattern mismatch BEFORE stitching it together. 1 Quote
Von Posted January 6, 2025 Report Posted January 6, 2025 Very nice - great to see how such things can be done! Thank you. 1 Quote
Popular Post pkinneb Posted January 9, 2025 Author Popular Post Report Posted January 9, 2025 After a light sanding I was able to get the front and back of chair two glued up. Should receive the foam shaping tool tomorrow so I can get back on the seats while I finish gluing this chair up. Hoping to get these done and out of the shop this weekend so I can get the MF #1 chair is the finish room. 5 Quote
Popular Post pkinneb Posted January 10, 2025 Author Popular Post Report Posted January 10, 2025 Finished gluing up chair two tonight I received my new tools today, a foam cutter and a foam shaper. The electric carving knife has served me well over the years. I have made several cushions with it but all 2 1/2" thick or less this 4" foam was (in my opinion) just to thick for it. I look forward it giving the new cutter a try Saturday, I need to pick up some silicone spray for it tomorrow. As you can see I gave the shaper a quick workout and will say it was well worth $13 From this... to this Also got the mounting nuts drilled and installed on chair 1 5 Quote
Popular Post BillyJack Posted January 11, 2025 Popular Post Report Posted January 11, 2025 It’s always fun to make projects that others don’t..You get to make them the way you want. I enjoyed making them, but the clients had cheaper options out there 3 Quote
Popular Post pkinneb Posted January 11, 2025 Author Popular Post Report Posted January 11, 2025 First up today was to clean the shop it was a mess, I feel much better now lol Next was final finish prep. I will spray the final clear coat tomorrow. One tip 1" foam with foil on it is great to use on top of a turn table that is too small for your project, its very strong. Underneath the foam is a 24" lazy Susan I use in the finish room. you can see a smaller version of the LS in the background With that done I moved back to the cushions and busted out the new foam cutter, I will just say it works very well. I still would save the $300 if you are only using 2 1/2" foam or less but it does literally cut like butter After some miner final shaping on the second cushion it was time to add some batting. Batting adds body to a cushion and helps fill small imperfections in the foam or fabric cover. It is glued on to the foam and then trimmed with a scissors. Most folks would do the sides as well but mine are tight to the chair so I didn't on this one. You can see how nice the front curve looks after adding it to this cushion. Now its time to add the cover. The first thing I do is mark the centerline on the seat platform and cut corresponding slits in the cover at the ctr line. This helps insure the cover is mounted centered side to side. Then its time to assemble the cushion starting in the center front then back, then a few staples in each side. Another tip here I always use stainless steal stapples that way if a drink is ever spilled on the cushion the staples will not rust. With that done you just keep going around the cushion filling in the empty spots. and walla an almost finished cushion I just need to add the bottom cover which I will do tomorrow that's pretty straight forward and won't take long. Oh and I need to rinse and repeat for the second chair 5 Quote
Popular Post pkinneb Posted January 12, 2025 Author Popular Post Report Posted January 12, 2025 First up today was the dustcover. I used basting tape to make a quick seam all the way around and then stappled it on. Then I located the mounting holes and cut the material away for screw clearance After finishing the second cushion I got them mounted and set the edge protectors in place ... and with that this project is nearly done. Just need to permanently attach the edge protectors and carry them into the house. I'll get that done this week and share some final pics with them in place in the game room. Thanks for following along! 7 Quote
Popular Post Coop Posted January 13, 2025 Popular Post Report Posted January 13, 2025 Very Nice! Hopefully for your guests, you’re not as good at pool as you are with your creativeness. 1 1 2 Quote
Popular Post fcschoenthal Posted January 13, 2025 Popular Post Report Posted January 13, 2025 Paul, thanks for taking us along for the journey. They are definitely meticulous in every aspect. I have nowhere near the patience for the upholstery that you do and would probably have ordered something off of Amazon that wouldn't do the chairs nearly the justice that your seats accomplish. 2 1 Quote
Popular Post pkinneb Posted January 18, 2025 Author Popular Post Report Posted January 18, 2025 Ok so this really is the last post on this build Needed to install the aluminum edge protectors on the feet. I had seen Philip Morley do this with brass on his bar stools and figured it should work with aluminum as well but thought it best to try it out first. I drilled a hole through the aluminum and the oak backer then with a piece of steel underneath and a small hammer i installed the 1/8" aluminum rod. It was installed with a small hammer and I just banged away until rounded over and nearly flush. A quick clean up with a file and 100 grit sandpaper and you can see the result on the right ...and even without epoxy I could not pull it back off...That'll work. Like Phil I thought screws would detract from the piece. Next I did the actual pieces on the chairs With that done the final task was to cut out rubber for the bottom of the cup holder cutouts. I had some left over toolbox liner and cut it out using the Shaper and Shaper Caliper for a perfect fit. ...and here are the final pics with the chairs in place. Mama's happy so we're all happy lol Thanks again for following along!! 5 Quote
fcschoenthal Posted January 18, 2025 Report Posted January 18, 2025 They looked great in your shop, but even nicer in the room. 1 1 Quote
Von Posted January 19, 2025 Report Posted January 19, 2025 They look great! Thank you for documenting this, lots of steps that were new to me. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.