gee-dub Posted December 4, 2024 Report Posted December 4, 2024 This piece is moving right along. Love the detailed journal on your build. 1 Quote
legenddc Posted December 4, 2024 Author Report Posted December 4, 2024 Thanks gee-dub. Trying to show the more "complicated" parts. Won't be many updates for a while as sanding doesn't make for good pictures... I tried using a card scrapper yesterday to get the glue out of the inside corner. That seems to be the quickest way to get it but I'm open to any other suggestions. 1 Quote
Mark J Posted December 4, 2024 Report Posted December 4, 2024 Once upon a time on a project far far away I used blue tape to mask off the joints with moderate success. I have also used these stiff glue applicators if the glue is still gummy. https://www.woodcraft.com/products/woodriver-glue-spreader-6-piece An old credit card would probably work just as well. If the glue is hard, well, that's harder. 2 Quote
legenddc Posted December 4, 2024 Author Report Posted December 4, 2024 For the second leg I waited to scrap the glue until it skinned over. That one appears to have less to clean up. I have one of those applicators but an old credit card cut at a 90* angle seems like it would work better. 1 Quote
Popular Post gee-dub Posted December 4, 2024 Popular Post Report Posted December 4, 2024 On 12/4/2024 at 5:44 AM, legenddc said: Thanks gee-dub. Trying to show the more "complicated" parts. Won't be many updates for a while as sanding doesn't make for good pictures... I tried using a card scrapper yesterday to get the glue out of the inside corner. That seems to be the quickest way to get it but I'm open to any other suggestions. I have a few things. Crook neck chisels are good for this as long as there is clearance for the chisel. For cramped quarters I have a mortise-corner-knocker-outer chisel that I use by hand. I also have some of Lee Valley's mini-scrapers. I got them many years ago and have still only used one. https://www.leevalley.com/en-us/shop/tools/hand-tools/scrapers/32672-miniature-scrapers?srsltid=AfmBOoohTIYtHiV8TkezGsQJdHmObnmhIBPJGTeXltjmqUlkcscjGbvO&item=50K3001 *** Update *** Sorry, I should have mentioned that catching the glue at the "leathery" stage is also really beneficial to removing any squeeze out via a chisel or scraper without tearing out material or leaving deep penetrating glue problems. I am in SoCal where we have very limited "real" weather so adjust to your environment . . . that being said I set a timer for about 30 minutes following a glue up. In my area, after that amount of time I can expect PVA glues like Titebond to be skinned over and somewhat solid under the skin. At this point they chisel off nicely and don't yet have the strength to pull wood fibers along with them. 6 Quote
Popular Post legenddc Posted December 5, 2024 Author Popular Post Report Posted December 5, 2024 Thanks Mark and gee-dub! I spent a little bit of time cleaning up the inside corners last night. The leg I waited for the glue to tack up on before I cleaned it up was much easier to clean up. Will be sure to set a timer again for 30 minutes and check on it. I ended up taking the nose off of my shoulder plane and used that to clean up a decent bit. I'm not being aggressive with it at all. After that I used a card scrapper. Didn't get a chance to check it with mineral spirits last night to see how much was left. Kid had me up all night so tonight may be an early bedtime with no time spent in the shop. 3 Quote
Popular Post legenddc Posted December 9, 2024 Author Popular Post Report Posted December 9, 2024 Still alive, barely chipping away. 3 of 4 legs are glued up, fourth has been sanded and will get glued today as time allows. Loads left to do still but immediate focus is getting the case ready for assembly. Scrapping away at the inside corners as I have time or need a break. 3 Quote
Popular Post legenddc Posted December 18, 2024 Author Popular Post Report Posted December 18, 2024 I finished sanding the rails yesterday and got the shelf pin holes drilled today. Wish I got more done but I have a sick kid home and had to go grocery shopping. She’ll be home tomorrow too so progress will be slower than anticipated. 6 Quote
Popular Post legenddc Posted December 31, 2024 Author Popular Post Report Posted December 31, 2024 Not loads of progress but some. The adjustable shelves have been cut to width and length and sanded. Only the 3 fixed shelves need to be cut to depth and cut the back. Took the case apart yesterday and will cut them and finish sanding everything soon. 5 Quote
Popular Post legenddc Posted January 5, 2025 Author Popular Post Report Posted January 5, 2025 Everything is sanded and this morning we glued up the case with some epoxy. Just need to make a few cleats and cut/sand the plywood back before applying finish. Just in time for an impending snow storm. 6 Quote
Popular Post gee-dub Posted January 5, 2025 Popular Post Report Posted January 5, 2025 It gets exciting toward the end. I often find there are more steps left than I think 3 Quote
Popular Post legenddc Posted January 13, 2025 Author Popular Post Report Posted January 13, 2025 I should have cut the back for this a while ago. It really changed the look and gave me motivation to finish. With the back cut I made some wood holders for the top and bottom shelf. Made extras for our TV stand and coffee table. Finished sanding everything from the glue up and cleaned the shop twice. I’m breaking up the finishing into two parts due to space and how long it takes to apply. Wiped down the back, case and top/bottom shelf with mineral spirits. Got some finish applied last night and will slowly keep chipping away. 6 Quote
fcschoenthal Posted January 13, 2025 Report Posted January 13, 2025 What finish are you using on this? Quote
Popular Post legenddc Posted January 14, 2025 Author Popular Post Report Posted January 14, 2025 I'm using General Finishes Arm-R-Seal and using the process below from Matt Cremona. I'd like to try out a hard wax oil at some point in time but I've found Arm-R-Seal holds up well to my wife and kids abuse. 5 1 Quote
Popular Post fcschoenthal Posted January 15, 2025 Popular Post Report Posted January 15, 2025 On 1/14/2025 at 9:08 AM, legenddc said: I'm using General Finishes Arm-R-Seal and using the process below from Matt Cremona. I'd like to try out a hard wax oil at some point in time but I've found Arm-R-Seal holds up well to my wife and kids abuse. I've never used Arm-R-Seal, but may have to get a can to try. I've been spoiled by Rubio for the last couple of years. I just don't have the patience anymore to rub on 4 coats of something, waiting hours between coats. Two coats of Rubio is usually more than enough for durability and can be done in about an hour. You pay more for it, but it takes so much less time to apply. I've also tried something new recently and sprayed some Halcion on a couple of projects for my son and it's really worked out well. It dries super quick so I can get 4 coats on in only a couple of hours and it levels beautifully. 4 Quote
legenddc Posted January 15, 2025 Author Report Posted January 15, 2025 On 1/14/2025 at 8:27 PM, fcschoenthal said: I've never used Arm-R-Seal, but may have to get a can to try. I've been spoiled by Rubio for the last couple of years. I just don't have the patience anymore to rub on 4 coats of something, waiting hours between coats. Two coats of Rubio is usually more than enough for durability and can be done in about an hour. You pay more for it, but it takes so much less time to apply. I've also tried something new recently and sprayed some Halcion on a couple of projects for my son and it's really worked out well. It dries super quick so I can get 4 coats on in only a couple of hours and it levels beautifully. I'd like to try Rubio or another hard-wax alternative but I don't want to test it on a massive project that's taken ages to make. I haven't done any research on Rubio besides seeing a few videos on Youtube. What would I need to get to use it? Is my pro/cons list below accurate in your opinion? Pros: 2 coats can be done in a hour Able to refinish without sanding the finish off Can be applied in the house Cons: Not as durable? I'd really like the idea of being able to apply finish quicker and not in the shop. In reality, I don't work on enough projects or have enough time that I'm stuck waiting to work on the next one in my shop. The durability concerns me as well. My kids and wife aren't gentle with things. We have a piece of walnut (Arm-R-Seal) on top of a shoe rack next to our front door that only has a few small scratches after 6+ years of keys being dropped on it, sunglasses, bottles, etc. Our coffee table is also holding up very well despite Legos, games, feet, cups and other abuse. I know you can fix things with Rubio but I'm not a big fan of maintenance/repair. Knowing myself there would just be scratches for years before I finally touched something up. 2 Quote
Popular Post Chestnut Posted January 15, 2025 Popular Post Report Posted January 15, 2025 On the quick and durable, I always like to inject "why not try an high quality shellac?" If it isn't going to be something sweating drinks will sit on for hours at a time, or a plant stand, shellac has been incredibly durable for some of the children items I've finished. I made a kitchen tower and finished it with shellac. After 2 years of daily toddler abuse it's in phenomenal condition all things considered. There are a lot of dents but that's because I used butternut which is very soft. That said the dents haven't caused finish failure like I expected they would. 4 Quote
Mark J Posted January 15, 2025 Report Posted January 15, 2025 I use another hard wax oil, Osmo Polyx-oil, but on small handheld turned pieces that don't see any abuse, so I can't speak to durability. Osmo is a one part product where Rubio is two part (I believe) so like epoxy you have to mix up a quantity rather than use what you need. Osmo is expensive, but a little goes a very long way. I assume that Rubio is the same. Osmo needs 12 hours between coats (you could probably get away with 8). Osmo does not smell bad, but it still has a smell, so I'm not sure you could get away with using it in the living quarters. I can't speak to your refinishing question. 2 Quote
Popular Post fcschoenthal Posted January 15, 2025 Popular Post Report Posted January 15, 2025 Marc did a comparison of hard wax oils here about 18 months ago and talks about durability. One of his comments is that even though hard wax oils are meant for floors, the durability comes from the wood species itself and the repairability is the guiding factor. Personally, I use Rubio because I can pick it up just down the road at my lumber supplier, but also that it comes in many different colors. I've used a very faint white on white oak that I think looks great. I've also used some of the darker shades on some walnut that wasn't the best looking to begin with. Rubio has a great "sample" color chart with different species here. 4 Quote
Popular Post wtnhighlander Posted January 16, 2025 Popular Post Report Posted January 16, 2025 No direct experience with Rubio or Osmo, but the samples I've seen with the tinted versions look far better than any tinted Poly I've run across. Drew's comments on shellac are spot-on, but it does have a strong, but not necessarily unpleasant, odor from the solvent (alcohol). Learning to apply it smoothly is a different curve than poly, as it dries very fast. Arm-R-Seal is a very tough finish, but I have come to like using a poly / oil / solvent blend. I buy Minwax "Tung Oil Finish" for convenience, but I know @gee-dub mixes his own recipe. It is dead simple to apply with a rag, and gives an excellent surface & sheen, but does take time, and does smell. In the end, I say stick with what you know works, until there is a compelling reason to change. 4 Quote
Popular Post legenddc Posted January 31, 2025 Author Popular Post Report Posted January 31, 2025 Since we’re on the topic of finishing, this was the first time I had some issues applying Arm-R-Seal. I believe it was the extreme cold here that lasted for a while and caused the humidity in our house to plummet. A couple of the shelves have some streaks but they’re not super noticeable and it will be covered by books anyway. And of course I threw an LED strip on the back because it’s for an almost 10 year old. She said the lights were going to be a big hit at her birthday party. At the rate she’s going through her books deciding what goes where it may be 6 months. I’ll post a loaded picture when she’s done. 10 Quote
wtnhighlander Posted February 1, 2025 Report Posted February 1, 2025 That turned out lovely! The lighting is a neat 'modern' touch. 1 1 Quote
pkinneb Posted February 1, 2025 Report Posted February 1, 2025 On 1/31/2025 at 5:33 PM, legenddc said: Since we’re on the topic of finishing, this was the first time I had some issues applying Arm-R-Seal. I believe it was the extreme cold here that lasted for a while and caused the humidity in our house to plummet. A couple of the shelves have some streaks but they’re not super noticeable and it will be covered by books anyway. And of course I threw an LED strip on the back because it’s for an almost 10 year old. She said the lights were going to be a big hit at her birthday party. At the rate she’s going through her books deciding what goes where it may be 6 months. I’ll post a loaded picture when she’s done. Nice job Dad!!That's the kind of stuff she'll remember forever 1 1 Quote
Mark J Posted February 1, 2025 Report Posted February 1, 2025 Nice work and happy child. May be even better than a happy wife. 1 Quote
Chestnut Posted February 3, 2025 Report Posted February 3, 2025 That looks awesome! You can call that a successful project. On 1/31/2025 at 5:33 PM, legenddc said: At the rate she’s going through her books deciding what goes where it may be 6 months. I’ll post a loaded picture when she’s done. This is my only regret with making bookshelves. I made 2 and should have made 4. 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.