prov163 Posted September 6, 2016 Report Posted September 6, 2016 I have older version PC 333 which has been great for years. I change the pad every year and it has held up. Merka is awesome but expensive. Like Shaney says, Bosch and Makita make good stuff. As for 5" vs 6" I don't know. I thought about going to a 6" a year or so ago, but decided instead to improve my hand tool skills and cut back the sanding of all forms as much as possible. Quote
JosephThomas Posted September 6, 2016 Report Posted September 6, 2016 Agree 100%. Most tools i have that aren't Festool are Bosch or Makita. Milwaukee looks like they have some nice stuff now but I've never used any of it. Also agree with the 6" sander comment. Its a big difference in size compared to the 5" ! Sent from my SM-N910W8 using Tapatalk I like my 6" sander, but it's way too big for face frames or similar sized stuff. I have wished a few times that I had a smaller one for those occasions Sent from my Nexus 5 using Tapatalk Quote
MisterDrow Posted September 6, 2016 Report Posted September 6, 2016 I really like the Hitachi 5" ROS I picked up from Lowes. I normally am not a big fan of power tools from that place but this one has served me well thus far. Quote
pkinneb Posted September 6, 2016 Report Posted September 6, 2016 I have used a PC 333vs for many years and been very happy with the results it appears it may have been replced by the PC 382 now. Quote
shaneymack Posted September 6, 2016 Report Posted September 6, 2016 I like my 6" sander, but it's way too big for face frames or similar sized stuff. I have wished a few times that I had a smaller one for those occasions Sent from my Nexus 5 using Tapatalk I use one of these two for small stuff like face frames Sent from my SM-N910W8 using Tapatalk Quote
JosephThomas Posted September 6, 2016 Report Posted September 6, 2016 10 minutes ago, shaneymack said: I use one of these two for small stuff like face frames Sent from my SM-N910W8 using Tapatalk Ic. I do still have quarter-sheet dewalt sander but it's not great. Pretty sure it's gonna give me nerve damage, lol. Quote
rodger. Posted September 6, 2016 Report Posted September 6, 2016 I use the 6" festool for all sanding. I changed out to the hard pad, and it does great on face frames. I broke my dominant hand a few years back, and the ets is wayyyyyy better and more comfortable than my old ridgid 5" Ros. 1 Quote
Isaac Posted September 6, 2016 Report Posted September 6, 2016 I've got this VonHaus model. It is a beast, definitely geared towards two handed use and probably best for horizontal use. I like the price, power and wide range of RPMs it operates at. I pair it with a Makita quarter sheet palm sander for getting into straight edges, corners, etc. There is a review with a video a guy did on Amazon that I think is fair. https://www.amazon.com/gp/product/B013ICVMGC/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 Quote
Alan G Posted September 6, 2016 Report Posted September 6, 2016 1 hour ago, shaneymack said: I use one of these two for small stuff like face frames Sent from my SM-N910W8 using Tapatalk Shane- Is that the RO 90? How do you like that one? Quote
kixnbux Posted September 6, 2016 Report Posted September 6, 2016 I use an RO 90 for cabinet refinishing. For the doors I use an RO 125. Both together are extremely nice to have. I use and ETS 125 for lighter duty finishing also. All have their place. Quote
shaneymack Posted September 6, 2016 Report Posted September 6, 2016 Shane- Is that the RO 90? How do you like that one? Ya thats the Ro90. The other one is the rts 400. The Ro90 is a great little sander. It is a 3.5" and it comes with the delta head which is great for getting in corners. Ergonomically it's nowhere near the Ets ec 150. The Rotex sanders are two handed sanders geared a little more towards construction type tasks but of course it works well in the shop also. It has its place and does a great job. Like all Festools, dust collection is great. Sent from my SM-N910W8 using Tapatalk Quote
Alan G Posted September 6, 2016 Report Posted September 6, 2016 6 minutes ago, shaneymack said: The Ro90 is a great little sander. It is a 3.5" and it comes with the delta head which is great for getting in corners. Ergonomically it's nowhere near the Ets ec 150. The Rotex sanders are two handed sanders geared a little more towards construction type tasks but of course it works well in the shop also. It has its place and does a great job. Like all Festools, dust collection is great. Sent from my SM-N910W8 using Tapatalk Do you have the ETS EC 150/3 or /5? Looking to upgrade soon from my Bosch ROS. Quote
shaneymack Posted September 6, 2016 Report Posted September 6, 2016 Do you have the ETS EC 150/3 or /5? Looking to upgrade soon from my Bosch ROS. I have the Ets ec 150/5. I have used it for all grits right to finish and it really does it all. Amazingly powerful and is a real beast in the lower grits but does a great job up to finish. If someone is able to see a difference with their naked eye between a piece finished with the 3mm stroke and a 5mm stroke they are better than I am. Start with the 5 and see if you are happy with it to 220 grit if not you could return it and get the 3. Pretty sure you won't return it. Sent from my SM-N910W8 using Tapatalk Quote
Alan G Posted September 6, 2016 Report Posted September 6, 2016 Thanks for the info! If you cant tell the difference between the 3 and the 5 I sure as hell am not going to be able too! 1 Quote
Woodenskye Posted September 6, 2016 Report Posted September 6, 2016 I still think the RO 150 is the best sander in the festool fleet. Once you get used to it it excels at rough sanding, fine sanding and polishing. Quote
rodger. Posted September 6, 2016 Report Posted September 6, 2016 I have the 150/3 and use it for everything (normally 120, 150, 180, 220). Does a great job. Hhh did a thread with a great comparison a while back. Check the search function. Quote
shaneymack Posted September 6, 2016 Report Posted September 6, 2016 I still think the RO 150 is the best sander in the festool fleet. Once you get used to it it excels at rough sanding, fine sanding and polishing. The question is IF you get used to it. Most hobbyists on here might not have the time to invest in getting good with that sander. It can be a frustrating sander out of the box from what I've read. Guess i should go buy one and report back. Do you have one, Bryan? Sent from my SM-N910W8 using Tapatalk Quote
Woodenskye Posted September 7, 2016 Report Posted September 7, 2016 9 minutes ago, shaneymack said: The question is IF you get used to it. Most hobbyists on here might not have the time to invest in getting good with that sander. It can be a frustrating sander out of the box from what I've read. Guess i should go buy one and report back. Do you have one, Bryan? Sent from my SM-N910W8 using Tapatalk Yes I have the RO 150, in addition to the Ets 150/3, Rts 400 and RO 90. It took me about 30-40 minutes to get used to it. I'm not sure I totally believe they need a break in period. The thing that you need to realize is that rotex mode is completely different than random orbit and how to control in each mode. I still like using the Ets at higher grits, but I did a test going from 24 grit all the way to 800 using the RO in both modes and the final finish was excellent. Quote
shaneymack Posted September 7, 2016 Report Posted September 7, 2016 Yes I have the RO 150, in addition to the Ets 150/3, Rts 400 and RO 90. It took me about 30-40 minutes to get used to it. I'm not sure I totally believe they need a break in period. The thing that you need to realize is that rotex mode is completely different than random orbit and how to control in each mode. I still like using the Ets at higher grits, but I did a test going from 24 grit all the way to 800 using the RO in both modes and the final finish was excellent. I've come across threads too often that make it seem like it's difficult to use and get used to. Also ergonomically it just doesn't seem like the best choice for furniture. Seems like more of a general purpose, jack of all trades type sander. I have thought about getting one many times and just can't pull the trigger cause im not sure when i would ever grab that over the Ets ec 150/5 which is a beast as well but ergonomically far superior. It's encouraging to hear it only took you 30 mins to tame that beast. How do you deal with it in Rotex mode. Light pressure? What is the trick with controlling it? Sent from my SM-N910W8 using Tapatalk Quote
Woodenskye Posted September 7, 2016 Report Posted September 7, 2016 4 minutes ago, shaneymack said: I've come across threads too often that make it seem like it's difficult to use and get used to. Also ergonomically it just doesn't seem like the best choice for furniture. Seems like more of a general purpose, jack of all trades type sander. I have thought about getting one many times and just can't pull the trigger cause im not sure when i would ever grab that over the Ets ec 150/5 which is a beast as well but ergonomically far superior. It's encouraging to hear it only took you 30 mins to tame that beast. How do you deal with it in Rotex mode. Light pressure? What is the trick with controlling it? Sent from my SM-N910W8 using Tapatalk Some of it was getting the DC and speed right, but a light touch is needed. I can grab by the head with 1 hand and it will float over the work surface in random orbit mode. In rotex mode, I use a little more pressure, but still not chocking. I also put light pressure on the tail to help guide. If you were closer I would bring for you to try out. I haven't tried the ec models, so I can't compare with the others I have. 1 Quote
wtnhighlander Posted September 7, 2016 Report Posted September 7, 2016 OP, if this is for a commercial shop, have you considered air-powered sanders as an option? Quote
Coop Posted September 7, 2016 Report Posted September 7, 2016 I us the non-green, PC 390 that someone recommended a while back and it fits my needs. Quote
jplemons Posted September 7, 2016 Report Posted September 7, 2016 I use the Bosch ROS65VC. I bought the 6" and 5" combo but am not sure it's still available. Dust collection with my Festool Midi is good and the vibration reduction is great. I'd like to add an RO90 eventually as well. Quote
gee-dub Posted September 7, 2016 Report Posted September 7, 2016 On September 6, 2016 at 7:47 AM, wdwerker said: I got tired of replacing Bosch sanders after a year or 2 of use in my small cabinet shop. So I tried a Festool ETS 150 sander , that was 12 years ago and it's still running ! That is a testimony that makes solid economic sense. My Bosch 1295 sanders ( no longer made) are over a decade old but, I only make three or four large pieces per year -and- I don't power sander very much. If you're in a production environment the investment in the festool sounds like it would pay for itself in a few years. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.