Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Just cleaned my saw blades...

Featured Replies

This discussion sure took a weird turn. Why do I have a strange desire to make pancakes?

I bet the saw blade could be heated up and then you can cook the pancake on the saw blade.

I just watched the video Marc did on Blade and Bit cleaning since I just upgraded my blades from basically disposable blades to Freud blades on my table and miter saws. I was going to get the Rockler cleaning kit but i thought it came with the same container that Marc uses in his video (i could have sworn it did when I looked into it about a year ago). Since the container that comes with the kit does not have a spout on it to pour the material back in, I will be looking into another option. But I am definitely going to be cleaning my blades probably every other month so that I can maximize the time between sharpenings. 

 

edit: I was thinking about the pan used in Marc's video and then it came to me, an oil drain pan. So you might have to go to your local auto parts place to get one but it shouldn't cost more than $10. Rockler also has the pitch and resin remover for 50% off. 

edit: I was thinking about the pan used in Marc's video and then it came to me, an oil drain pan. So you might have to go to your local auto parts place to get one but it shouldn't cost more than $10. Rockler also has the pitch and resin remover for 50% off.

if it costs $10 don't buy it, Autozone has them for like $3.

  • Author

A while back I was caught eyeballing my wife's tupperware. There's a round one that's big enough and deep enough to put a pie in, and it would have been PERFECT to soak a saw blade in.

I use the Freud pitch remover that you can buy for hd. Works awesome. Quick spritz, let sit a min or two, and scrub with an old toothbrush.

if it costs $10 don't buy it, Autozone has them for like $3.

 

Yea went to my local auto parts store and the had a package deal. You got an oil drain pan, roll of shop towels, bottle of orange hand cleaner, and a funnel for $5

....edit: I was thinking about the pan used in Marc's video and then it came to me, an oil drain pan. So you might have to go to your local auto parts place to get one but it shouldn't cost more than $10. Rockler also has the pitch and resin remover for 50% off. 

 

I use the top from an old 5 gallon pail.  

  • 4 weeks later...

I know this is an older thread, but I just cleaned the blade off of my TS.  I soaked it in white vinegar for about an hour.  Was able to wipe the pitch off the blade.  I think rinsed with water and dried thoroughly.  Then made a few cuts to make sure the blade  was indeed good and dry.  The difference in cut quality was amazing.

I use some bit and blade cleaner (forget who makes it) spray for a quick light cleaning while its still on the machine. This is still no sub for a proper cleaning but it gets me a little bit longer between cleaning days.

Speaking of which..... bout time the forest woodworker gets some tlc...

Side note- acids can eat through metals bases can't (not that anyone here is going to use a strong enough acid for long enough to really effect anything)

That is a very good point.  The vinegar is very mild, but I still took the blade to the kitchen sink and sprayed it down, the thoroughly dried it.  I was using it today to build my clamp rack, and I was really happy with how the blade is cutting again.  I thought it was time to get it sharpened, but it was simply dirty.

Miles, your statement is not true. There are bases known to eat through metals. The danger here is not typically to the steel itself but rather to the softer metals that comprise certain steel alloys. Your statement is more accurate if you are simply referring to the typical strength of basic home cleaners.

  • Author

I'd be awfully worried about rust with vinegar. I've used vinegar to induce/speed up the rusting process before.

I'd be awfully worried about rust with vinegar. I've used vinegar to induce/speed up the rusting process before.

I don't worry about it. Ill use whatever I can find around the house. I don't think most households have chemicals laying around that will hurt a saw blade. Even oven cleaner and big box store muriatic acid are so weak now days its not really something most of us need to worry about. Oven cleaners 20 years ago were strong but crap they sell today is wimpy. Simple green is by far the best but if we are out I just go digging for anything that might work.

I really don't clean my blades all that often -- probably has something to do with the species I work with, the sharpness of the blade, etc...

 

I find that when one of my blades has a good deal of build-up, then it's time to send it to the sharpening service -- and they clean it for me :)

 

The service also coats them in something after sharpening, so I don't bother with that either...

 

I don't want to claim that this is 'best practice' (probably far from it),  but it seems to work for me...  you're mileage may vary. 

 

When I'm doing a bit of DIY and running pine/DF/PT/etc across the saw, then pitch does build pretty fast and the blade gets a quick clean at the end of the project...

I clean my blades every few projects when I notice them getting dirty. To be honest, it's probably time for a new blade or to get this one sharpened up.

So next question? Do you coat your blades after cleaning for rust inhibition during storage?

 

Personally, if you're going to clean them I think the best time to do it is right before you use them rather than right before you put them away.  A spinning blade is probably the best way to get rid of any residual moisture for cleaning and rinsing.  It's not like waxing you tables which leaves a protective film.

The blade wasn't in the vinegar nowhere near long enough to worry about rust.  There was probably more risk of that with the rinse I did afterwards.  I think the the important thing is thoroughly drying it off, then making some cuts with it right away.  Its been a few days since I did all this, with some usage yesterday,  No problems with rust, and the blade cuts almost like brand new again.

I use the Rockler brand blade cleaning solution and I'm pleased with the results.

  • Author

The blade wasn't in the vinegar nowhere near long enough to worry about rust.  There was probably more risk of that with the rinse I did afterwards.  I think the the important thing is thoroughly drying it off, then making some cuts with it right away.  Its been a few days since I did all this, with some usage yesterday,  No problems with rust, and the blade cuts almost like brand new again.

 

I there's no rust on it after a few days, then it should be fine. I would dip steel into vinegar and leave it in the grass overnight (to get coated with dew). Rust started over all surfaces by the next morning.

Can I use my forge and heat treat OVEN in this bake off? I went to Culinary school for baking, a subject I truly love. The main reason for baking powder is chemical levener, for quick breads and the like VS yeast which take a lot longer to get a rise out of things :o  How about if I forge my own bowls and tools, uh, I already have so they are good to go if the rules allow them ;D

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.