How many routers do you own?  

74 members have voted

  1. 1. How many routers do you own?



Recommended Posts

Posted

Just a question that was discussed a bit in another thread. Lets see who is a router addict!

If you have more than 10, please state the amount in a reply. Lets see who wins!

All working power routers count. This includes laminate trimmers, but I don't think dremmels count. Also, no hand tools allowed in this poll, even though there are some awesome router planes out there.

If you have kit that includes more than one base, that still only counts as one router.

Posted

I voted more than 10, but I can't even remember all of them without checking.  I know I have 3 -7518 (just bought the third one today), I-7539, 5-palm router/trimmers with dedicated round-over bits, 1 trimmer to put other bits in when needed, 2-Bosch that I don't remember the numbers of-PIA to change depth so dedicated, 1 -1613,  1-Milwaukee 11 amp (don't remember model #), 7-690s-(most dedicated-some still in box like PB-most in toolboxes with templates they are dedicated to ready to go to work.  Some have been dedicated to one task, and only used once a year when I built new houses. ) that I can think of but I'm sure there are more because I bought 4 when they were offering free palm routers and I already had several, I-big Triton that someone gave me, a couple of old Rockwells-same as PC 690-need brushes and bearings but haven't taken time-maybe I shouldn't count these,

 

I'll edit when I remember more or check next week.  I use tools for a living, and have been buying them for over 40 years.

  • Like 1
Posted

Remember the lobster in Finding Nemo?...."I am shamed"..........I only have 3..... but then I don't have a production shop either!

Good new is you don't need therapy until you own 27

Posted

Mine were accumulated over a long time.  I built one spec house a year from 1973 to 2006.  In 2006, I decided that all the other builders were smarter than I was, so I stopped building new houses, and only work on old ones.  I never kept a house longer than 2 weeks once I put a price on it, but so many new builders got into it, and if they built one or 20 and couldn't sell them, they'd build 2 or 40 more.  We all know where it went.

 

Anyway, I never used prehung doors, or bought cabinets.  Most of the routers are dedicated to a specific job.  For instance, there are 4 just for hanging a door.  One to fit the 1960s Craftsman door hinge template.  It clamps onto the door without having to put nail or screw holes in the door like newer one do. 

 

It doesn't clamp to jambs over a certain width, so I have a plywood template that screws to the jamb with the screws going in where the stop will go, so still no holes, but requires a different depth router setup than the jig that clamps to a door.  So, that's two routers for the door hinges.

 

The third one is for a template I made that clamps to the door without leaving holes or marks to route the mortise for the lock plunger.  It has a bearing pattern bit in it, but is a different cutting depth than the single metal layer door strke plate, which has the 4th dedicated router.

 

I know it doesn't take long to change the depth, but it does take most of the time involved in this process.  When I get the jobs done I want to do for the day, I sail on the lake, ride a horse, or play golf, so any time saved is valuable in another way.  I can do any of these steps with little time, and no hassle.

 

This is a lot different than doing woodworking for fun.  I still have fun doing it, but efficiency has a different importance.  An old builder told me a long time ago, "Doing this stuff for a living is not about knowing what goes where, but how to get the plywood into the house."

Posted

I only have 2 - a 1/4" collet Black & Decker that I bought a *long time ago and is currently fixed into my portable router table but doesn't get used much any more because it's so hard to adjust and change bits, and a 690 that I bought fixed base only to use with the PC dovetail jig I bought several years ago.  The 690 has only been used with the jig once (to set it up) and since has been used more for other purposes.

 

I am, however, currently shopping a bigger, variable speed (probably the PC) for a better router table I'm planning.

Posted

Three so far, but they're relatively inexpensive as power tools go (depending on the brand/model) so if you do enough work to leave one rigged up to a specific task it makes sense to add on. I have a Ridgid trim router and a Festool plunge router for most tasks and a Bosch 2hp router for the router table that may come out for heavier duty tasks. 

Posted

19 working routers, several more are just hanging around as parts donors. Not even counting a couple of 1970's vintage Craftsman routers I just never got around to throwing out.....they still run if anyone is into that vintage.

Posted

Two Bosch 1617 kits, those are my two primary go-to routers

1 Craftsman router, I keep a flush trim bit on that

1 Craftsman rotary tool, basically an early trim router

1 Dremel tool - if you can count that as a router

  • 2 weeks later...
  • 3 weeks later...
  • 3 weeks later...
Posted

I only recently acquired my first one.  My only other router experience was on my friend's dad's router table 2+ decades ago.  I could see having a few different ones, but why the router hording?  Especially having 2 or 3 of the exact same model?  Am I missing something or is my level of craziness just on a different plane (puns intended).

Posted

quote:  "I  only recently acquired my first one.  My only other router experience was on my friend's dad's router table 2+ decades ago.  I could see having a few different ones, but why the router hording?  Especially having 2 or 3 of the exact same model?  Am I missing something or is my level of craziness just on a different plane (puns intended)."

 

I do this for a living, so some are dedicated to one task-like hinges for doors and jambs, lock strikes, lock plunger mortise-I've never used prehung doors so that's three ready to go with their templates. For standard half-blind dovetails one 690 is in the box with the template,ready to go. Several palm routers with different radius roundovers.  For a current sash project, we have 3 7518s for different profiles, and 2 690s for different muntin copes, and one spiral straight bit in a router wing on one table saw.  We are also using a second table saw on that project. I bought the second 690 for that project this week when another custom bit came for part of the design that I changed.  Then a couple of plunge routers............................, and others I'm not thinking about right off the top of my head.  Some of the dedicated ones have been dedicated to one task for 20 years.

Posted

quote:  "I  only recently acquired my first one.  My only other router experience was on my friend's dad's router table 2+ decades ago.  I could see having a few different ones, but why the router hording?  Especially having 2 or 3 of the exact same model?  Am I missing something or is my level of craziness just on a different plane (puns intended)."

 

I do this for a living, so some are dedicated to one task-like hinges for doors and jambs, lock strikes, lock plunger mortise-I've never used prehung doors so that's three ready to go with their templates. For standard half-blind dovetails one 690 is in the box with the template,ready to go. Several palm routers with different radius roundovers.  For a current sash project, we have 3 7518s for different profiles, and 2 690s for different muntin copes, and one spiral straight bit in a router wing on one table saw.  We are also using a second table saw on that project. I bought the second 690 for that project this week when another custom bit came for part of the design that I changed.  Then a couple of plunge routers............................, and others I'm not thinking about right off the top of my head.  Some of the dedicated ones have been dedicated to one task for 20 years.

As everyone sat in a circle, Tom says, "Hello my name is Tom and I love routers".  The group just looked at him and said nothing because they all had on their 3M, 30 db noise reduction ear protection and no one heard him.

cc3be18b-aa0f-4a31-854a-5b3ee2645067_300Welcome Tom.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 67 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined