Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Basement Shop Set Up - Ceiling

Featured Replies

So I am just getting started at setting up shop in my new house and was hoping for some input on my options for the ceiling.  As the title says it is a basement shop.  The new dimensions are going to be about 33'x12'.  It is a walkout basement so will include a nice big window and an small overhead door.  The floor joists are at two heights (sunken living room above), taller is 94", shorter is 86"(?).  Rest of the basement has drop ceiling and I need to keep some way to access the stuff in the ceiling of the shop (pipes, wires etc).  I can't do drop ceiling in the shorter part due to the overhead door, and don't want to lose the height.  

 

Walls in the shop are going to be OSB, so that hanging things isn't an issue (and cheaper then ply).  Probably won't even paint them since such a large %of the wall space will have cabinets and such hung on it.  

 

So options I see for the ceiling;

 

OSB Painted white

Unpainted OSB

Drywall (not mudded), painted

1/4" ply wood

 

Any experience or other options to consider?  

 

Planning on 8' florescent lights, how have others done these lights with keeping the ceiling as removable as possible?  Anyone ever cut drywall or ply wood panels in half to make more manageable part for removal if needed?

 

Thanks (I will try to get some pictures, demo of the existing wall was completed over the weekend)

 

Pictures would help one question I have, are mechanicals recessed into the joist bays or are they mounted or, hung to the bottoms of the joists?

==> So options I see for the ceiling

 

At some point, you usually need access to the ceiling for DIY...  So why do anything to the ceiling?

 

Sound Insulate between the joists, hang some daylight T-8s, hang your central DC ductwork, run your shop Air, run your 220 and call it a day.... :)

==> So options I see for the ceiling

 

At some point, you usually need access to the ceiling for DIY...  So why do anything to the ceiling?

 

Sound Insulate between the joists, hang some daylight T-8s, hang your central DC ductwork, run your shop Air, run your 220 and call it a day.... :)

 

+1 - Totally agree with H on this one.  All possibilities for the space are available if the space is open.

The Lithonia website has an excellent resource to help you determine how many fixtures you will want.  I installed the 5000k degree T8 bulbs from Philips and the lighting is excellent. 

  • Author

Reason I was thinking about doing something for the ceiling was to limit the areas for dust to accumulate and also to make it easier to seal this are off from rest of the basement.  Not sure how to seal around all of the joists and stuff that runs in them between the shop and the bathroom that shares a wall. 

 

There is duct work for the house running along the length on one side of the shop, so would have to box that in somehow if putting up a ceiling.  I will go try to get pictures right now, after I rig up some lights so that the pictures stand a chance being useful.  

 

Thanks for the feedback thus far!

  • Author

Here are a few photos (if this works for attaching them).  

 

 

As I stated there are mechanicals running below the joists, and plenty of stuff in the joists.  The wall that has OSB has a bathroom on the other side.  So there needs to be a way to block the dust from the shop from going into that room.  

 

New idea for the night is possibly to leave/reinstall the drop ceiling on the tall ceiling part, and then leave the other half with no ceiling.  I can then finish off the soffit around the mechanicals in the part that has the bathroom, which will pretty well seal that up.  Hopefully that makes sense, it does in my head right now.

 

post-6111-0-08467700-1381202732_thumb.jp

 

post-6111-0-34785700-1381202742_thumb.jp

 

post-6111-0-82644700-1381202770_thumb.jp 

I would just box around the ducts and, pipes and dry wall the sucker. If you want access to the duct and pipe chase use plywood or OSB to close it in and, attach with screws.

My normal answer to such a proposition is drywall, because when painted, it will reflect a lot of light.  OSB, when painted, still shows the "strands", and doesn't look as well.

 

But in this case, access to the mechanicals is also at issue.  This reminds me of the garage at the home where I grew up.

 

In the studs, inset "nuts" (really anchors) so that gravity does not work against them (glue, pin, or use something like this: http://monsterfastener.com/sizelist.aspx?ictype=Jack+Nut)  Now you have a way to use "board and batten" construction, using painted 1/4 masonite and 1/4 inch by 3 inch wood battens.  Assuming your studs are 16" on center, a 4X8 sheet of masonite will cover three bays.  Allen bolts and washers hold the battens in, the battens hold the panels.  

 

 

I may not be explaining it well, but I thought it looked nice when I was 13... 

If you are going for 8' lamps (presumably twin 8 foots)  consider 2 x 4' twin tubes instead. The tubes and light fixtures are cheaper but will still put out the same amount of light. Use T8 tubes with the correct fixtures and 6400K daylight temperature. With modern fixtures there is no annoying flicker when switching them on - they come on immediately - and there is a very short time until they are at full light output.

 

There are many forum threads on lighting so have a search about.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.