Doomwolf Posted November 8, 2013 Report Posted November 8, 2013 Couple of beginner questions- 1-I'm doing up my BDay/Christmas list and looking for a basic set of chisels. Is Narex a decent brand to use? I was thinking of asking for the set of four that Lee Valley sellshttp://www.leevalley.com/en/Wood/page.aspx?p=67707&cat=1,41504 2-I've got a book out from the library on handtools. It has a section on refurbishing planes, and one of the suggestions it has for removing rust is electrolysis (attach the negative lead of a 2-amp battery charger to the plane, the postive lead to an anode, and place both of them in a plastic bucket with 1tsp of baking powder in a gallon of water. Plane is supposed to derust in ~2hr). Has anyone tried this before, and does it actually work? Quote
Pwalter5110 Posted November 8, 2013 Report Posted November 8, 2013 Hey doomwolf. I dont own the narex chisels, but i have heard nothing but good things about them. I have used electrolysis on a hand plane and it worked amazingly well. Quote
Thiel Posted November 8, 2013 Report Posted November 8, 2013 The narex chisels are quite good. I've had mine for years. Priced right too. Quote
TerryMcK Posted November 8, 2013 Report Posted November 8, 2013 All the reviews I've read for Narex chisels have been very favourable. Quote
G S Haydon Posted November 8, 2013 Report Posted November 8, 2013 I would own a Narex mortice chisel and I would happily buy more Narex products. You might find after the first honing the edge chips. Don't worry hone again and this problem goes away. Something to do with how they are made. Quote
Ozwald Posted November 8, 2013 Report Posted November 8, 2013 Something to do with how they are mad. I don't know, but the thought of angry chisels makes me a little uneasy this morning. 1 Quote
Cochese Posted November 8, 2013 Report Posted November 8, 2013 I have the entire line of the lighter (color) Narex bevel chisels and mortise chisels. Love the quality of the steel, love the shape of the handle. There might be better chisels out there but IMO the combination of quality and price make them near unbeatable. For anyone in the States, Highland carries them as well. Quote
PaulMarcel Posted November 8, 2013 Report Posted November 8, 2013 +1 all the above; excellent value Quote
Doomwolf Posted November 8, 2013 Author Report Posted November 8, 2013 The chisels stay on the list then. Anyone else tried the electrolysis method on planes? Quote
Tpt life Posted November 8, 2013 Report Posted November 8, 2013 Doom, no electro but I have vinegar bathed with good success. Quote
wilburpan Posted November 12, 2013 Report Posted November 12, 2013 I’ve used electrolysis on a number of rusty tools, including planes. It works great. Quote
Doomwolf Posted November 13, 2013 Author Report Posted November 13, 2013 Good to know. I want to try it for the sole reason that it sounds kind of cool. Also, the fact that an electric current does a bunch of the work is appealing. Any guidance on how far the plane and the anode should be from one another? Quote
wilburpan Posted November 13, 2013 Report Posted November 13, 2013 Distance isn't critical, as long as they don't touch. You do want to surround the tool with anodes if possible, or at least rotate it on occasion. Quote
wtnhighlander Posted November 13, 2013 Report Posted November 13, 2013 Curious about the electrolysis. Does the anode need to be ferrous metal, or something dissimilar to the object being 'derusted'? Seems like the movement of electrons from negative to positive must carry the loose rust particles from cathode to anode, so maybe it just needs to be a good conductor. Basically electroplating in reverse. The baking soda must produce a chemical reaction to help detatch the rust particles. Anyone know if it helps to use hot water? Quote
wilburpan Posted November 13, 2013 Report Posted November 13, 2013 I went to my local borg, got a piece of 1” wide steel, and cut it to the lengths that I needed with a hacksaw. I’m sure there were cheaper ways of getting scrap pieces of steel, but this was the most convenient. You don’t want baking soda (sodium bicarbonate, NaHCO3) for this. You want washing soda, also known as sodium carbonate (Na2CO3). Hot water might speed things up a little, but I’ve never seen the need for it. The times that I did this, I put the electrolysis rig in my garage, and the hot water would have cooled down to the outside temperature pretty quickly. Quote
bobcrosley Posted November 15, 2013 Report Posted November 15, 2013 George Vondriska at WWGOA just had an article and video on removing rust from tools with electrolysis. For an anode, he cut the bottom off an old coffee can and then cut down the can and opened it up so that it encircled, but didn't touch, the plane. I thought that was a pretty cool idea, and hadn't seen that before. Video: http://www.wwgoa.com/video/000311_removing-rust-with-electrolysis/ Article: http://www.wwgoa.com/removing-rust-with-electrolysis/ Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.