Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Shop Organization

Featured Replies

How do you organize your shop? Specifically, if you have drawers, shelves, how have you divided them to organize your tools, fasteners, etc.?

I created this exact same thread back in September so, will just drop a link to those pics..

 

  • 2 weeks later...
  • Author

Ok, I have read the thread and I am still interesting in seeing more organizational styles or methods.  I have 10' of cabinetry with 2 shelves each. Limitless possibilities!! What I am really in search of is how people start their organizational processes. Do you go by categorizing all tools together or tools by job? Or? The slat wall is a whole other ball of wax. I am thinking of keeping only the items that I use every time I make a project on that wall or perhaps fasteners? Not sure yet.

 

In my other organizer, I did a tools by job which worked out fairly well, it was broad enough to not have much of a conflict with what should go where when it had many categories. For instance, I have an electrical drawer that houses all my wires, nuts, specialty connectors, fittings, tubings and associated tools. Then there is a paint, caulk drawer that has brushes, rollers, covers, masking tapes, caulking guns, straight edge, paint trays, etc.

 

Here is a picture of the cabinets I recently made and installed. Keep in mind that this is a garage ceiling and there are some gaps and no I was not going to take the time to produce and install a filler scribe :blink: The cabinets are crappy HD AC pine plywood with birch edge banding sprayed with transtinted Rust Oleum waterbased ultimate polyurethane. The poly is actually pretty good and dries very fast in full sunlight.

 

016_zpsd0d4b3fd.jpg

The cabinets look great!  As for organization, that really depends on your work flow and what you want.

 

When I did my shop (and am still doing it), nothing got a "home" until I did a couple projects.  The last thing I wanted to do was walk clear across the room to get X.  Example; I ended up adding a couple drawers to my out-feed table as I found myself doing a lot of work there.  So, ultimately, my layout tools and a few other odds and ends got their "home" in one of those drawers.  Bottom line, increase efficiency.

 

My actual bench still has a few empty drawers.  Frankly, I am severely lacking in hand tools but, it's a direction I intend on going.  These items are better suited for this area.  For me, it's easier to leave these spaces empty for now as I think I know what I want to do in the future.

 

I still have lots of tools and stuff that I don't think are in their final "home".  As I continue to work projects, I think it will become more obvious to me where those things belong and work well in my work flow.  Maybe that means that I put them in current open drawers or cupboards or, maybe that means that I need to build a new shelf or cabinet?

 

It's always amazing to me to see how people set up their shops and what works for them.  Just because I put something in a certain place or do things a certain way doesn't mean that's the best option.  Most of the time, it means I don't know any better ;)

  • Author

When I did my shop (and am still doing it), nothing got a "home" until I did a couple projects.  The last thing I wanted to do was walk clear across the room to get X.  Example; I ended up adding a couple drawers to my out-feed table as I found myself doing a lot of work there.  So, ultimately, my layout tools and a few other odds and ends got their "home" in one of those drawers.  Bottom line, increase efficiency.

 

 

 

Yes!! Absolutely! One of the next things on my organizational lists is a roll around tool/assembly chest of drawers with possibly a flip top that opens to either side. Here is a picture of it from the Popular Woodworking folk. I intend for this to live under my hand tool storage cabinet that will be built directly under the last cabinet to the right of the slat wall. I think that the roll around box will be a happy middle ground for tools not in there homes during projects or perhaps it will be a permanent station for layout tools and hardware. A lot of unknown's!

 

PWgermanworkbox_zpsef39c14d.jpg

Sounds and looks to me like you have your vision of what you want!  Good on ya, that's half the battle.

 

I like this cabinet idea!

  • Author

Sounds and looks to me like you have your vision of what you want!  Good on ya, that's half the battle.

 

I like this cabinet idea!

My OCD is making it uneasy for me to just "go" with it. I would really like a clearer vision of what goes where, but subconsciously my brain is planning and allowing enough space to "figure it out" as I and the shop grow. That's my theory at least ;-)

Only you can decide your workflow, wants, and needs.

 

The rest of us can help with ideas to provide you a little inspiration to create exactly what you want.

Going to agree with TIODS on layout. I just completed another project and reset some stuff again. Just the little things that didn't matter, until I noticed I was moving too much to get them. I think a shop is never complete. 

One of the challenges of having a limited amount of shop space. Sometimes it takes a while to figure what flow works best for you. It feels like I am changing around my shop every couple weeks! It's funny that you mention the German Tool Cart from Pop Wood, I was just looking at that article today too!

Nice job on the cabinets!

  • Author

One of the challenges of having a limited amount of shop space. Sometimes it takes a while to figure what flow works best for you. It feels like I am changing around my shop every couple weeks! It's funny that you mention the German Tool Cart from Pop Wood, I was just looking at that article today too!

Nice job on the cabinets!

That is one article that instantly filed in my brain under uber useful :-) I started altering it in sketchup last night. I am thinking about nixing the front doors in an effort to make it more accessible. And to save overall height as this has to fit under my future hand tools cabinet, the upper flip boxes are being made only ~3.5" deep. At 6+" deep I don't think the extra depth lends itself to more utility, I think stuff would be hard to get at under layers. The flip out "table" under the boxes in my opinion should get a ledge, just a small strip of wood to keep things from rolling off. It would have to be located just behind where it closes on the interior partition. Really a great design, but I might simplify mine for materials savings into 3-4 drawers with the flip top boxes. I am sure internal drawer separators, etc can still give me the functionality without all the drawers.

 

What do you think? Do you like it with more drawers or would you prefer full width drawers?

 * What do you think? Do you like it with more drawers or would you prefer full width drawers?

 

That would depend on what you plan on putting in them.  It would look great either way.

 

Perhaps you one 1 or 2 full width drawers and then partition the other section for a few smaller drawers?

The cabinet looks awesome!

 

For my shop storage, I tend to make simple book cases, and just put stuff on them :) Honestly, it's not ideal. I may add doors to a couple of them in the future. The way I think about it is this. My shop cabinets are my prototypes. I build them very quickly, and they give me a good idea of how much time and materials the "real" one is going to take. I don't use any joinery other than crude but effective nails for the case construction. I do take the time to plow dadoes for the shelves, and the backs are all beaded T&G joints. I also use these to experiment with different colors.

 

Here are a few I made.

 

1466094_10202624684286470_624449352_n.jp

 

1184980_10201772176854317_1161870532_n.j

 

1186723_10201775379014369_1824535102_n.j

I like the more drawers option. Mostly because I have a bunch of those red metal drawers that I got form LV a couple years ago. I would probably skip the long drawer on the bottom and leave that open and store a crosscut sled there instead (if I ever get around to making one). I am not completely sold on the flip tops yet either. Keep us updated on your progress. 

I like the more drawers option. Mostly because I have a bunch of those red metal drawers that I got form LV a couple years ago.

 

There was an article in FWW on small workshops a few years ago. The author used the same drawers in a simple plywood cabinet, and put his drill press on the top. 

  • Author

TIODS, I don't know honestly.

 

I was looking at ease of construction and certainly fewer drawers would be quicker, easier and fewer materials used to construct. As proposed it would be an assembly cart, rolled to the table to assemble projects, a storage area for fasteners, tools, etc. whether permanently or temporarily. I don't know. I really don't know if I even need one, the idea just resonated with me as a real time saver to have all those things mobile, or at the least to be able to pick what I needed from around the shop and roll it to the table.

 

I have some ball bearing drawer slides on hand that I could use so fewer drawers is a possibility, but I could also just as easily make the drawers not as wide on one side and use shallower compartments on the other side as shown. I could pickup some drops from the local steel distributor and roll my own pans too.... I would like to omit the doors though, I don't like the idea of having to open the doors to get to the items, there are times where the area around a project may have limited room to swing those doors. They seem like they would be cumbersome. I would prefer full overlay drawers to keep the dust out but still be accessible.

 

Lots of items to ponder, sketchup will be getting a workout!

When I redid the cabinets in my shop into there permanent configuration I organized everything according to how often I use it. In other words if it's stored in a wall cabinet then the most used items go on the bottom shelf with the least used on the top shelves. Same applies to drawers. the most used items in the top drawers and the least used in the bottom drawers.

 

I went from this mess I worked with for 5 years.

post-202-0-06645300-1385319004_thumb.jpgpost-202-0-26452700-1385319033_thumb.jpg

 

To this final configuration.

post-202-0-59549700-1385318939_thumb.jpg

 

Here is a photo with just the wall cabinets installed without any doors yet.

post-202-0-89868600-1385319201_thumb.jpg

 

What are your slides rated for with regard to weight? With a deep drawer and full extension slides you can fab drop in trays for multiple layers in single box construction and installation.

Best thing I ever did was put doors on my cabinets. One it keeps the dust out and it just feels a little more secure when I work with the shop door open as prying eyes can't see whats behind the doors.

 

As for the base cabinets I find I prefer drawers to doors and shelves as I would rather pull out a drawer to get something than get on my hands and knees to dig something out on a shelf. Just speaking from lots experience.

 

Here is the cart I built for holding my finishing supplies. It can also double as support for my band saw, table saw, surface planer or scms station as they are all at the same height including my work bench.

post-202-0-86273700-1385319676_thumb.jpgpost-202-0-82855100-1385319693_thumb.jpg

 

Don't forget about storage under the out feed table for the table saw. I'm redoing mine right now and it will also serve as a down draft table also. This will have 8 drawers that will hold my cordless drills, nails for the nail guns, sanding supplies and the chargers for the cordless tools along with my vacuum pump for veneering.

post-202-0-00235000-1385319799_thumb.jpgpost-202-0-92630300-1385319813_thumb.jpg

  • Author

What are your slides rated for with regard to weight? With a deep drawer and full extension slides you can fab drop in trays for multiple layers in single box construction and installation.

A very good point C! The slides are full extension at 100 lbs.

  • Author

Diving in, I just spent about 2 hours getting all my fasteners organized somewhat better.

 

0081_zps0210aac2.jpg

 

Definitely not final, just temporary to get stuff off of the floor. The plastic bins are somewhat full, but accessible, with cardboard boxes of screws sorted by size, length and head type, pan or flat.

 

This is what the table saw looks like. No further jobs can get done until its cleared off ;-)

 

0082_zps43f33273.jpg

==> This is what the table saw looks like. No further jobs can get done until its cleared off ;-)

 

Well, isn't that what your bandsaw is for? :)

==> This is what the table saw looks like. No further jobs can get done until its cleared off ;-)

 

Well, isn't that what your bandsaw is for? :)

 

The most important skill to master in woodworking is how to move a pile of crap from one tool to another.  The band saw is quite a tricky recipient of the pile of crap to master.  The router table is much easier.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.