bushwacked Posted December 3, 2014 Report Posted December 3, 2014 So thinking ahead so I can start researching and learning. Joiners... One of the big things for most people here is 6" or 8" ... I think I'm going to go 8" since It will be my big buy for that 6-8 month period. I also am looking into the spiral cutting blades for smoother and quieter cuts. Then parallel wings of think too since they say they are a lot easier. But I don't know how often I would really be adjusting them to make it worth the extra money. What price ranges am I looking at here. $1000ish (grizzly range) and $2300 (Powermatic) any others I should consider?? Planers ... I don't know much about these. I know what they do but as far as size and and all that I don't have a clue. I know there are a lot of variables that would go into telling me what I need but what are the most used sizes for the common crowd? 13-15"?? What should I look into with these? Price ranges again I am looking at?? Now on to brands. Grizzly has some really good pricing on both jointers and planers. Are they worth a crap? Is Powermatic the king in this category? Where does jet rank? Thanks for the help. Just need some starting points so I can go research a lot Quote
..Kev Posted December 3, 2014 Report Posted December 3, 2014 First question is if you have 220 power ? Quote
Beechwood Chip Posted December 3, 2014 Report Posted December 3, 2014 Even if you only adjust them once, I'd get the parallelogram jointer. Quick poll: how many people realized that their Jointer tables were out of alignment, tried to fix it with shims, gave up and bought a parallelogram jointer? Not me, because I've just been avoiding the issue and not using my jointer. But the next time it gives me any trouble, it's outa here. I'm usually an advocate of buying inexpensive tools at first, and trading up if you find you need the features/precision/power/whatever. But this is one case where I wish I had gotten a "real" machine from the beginning. Quote
AstroDave Posted December 3, 2014 Report Posted December 3, 2014 I just went through this process myself and of course am no expert not even close..yet Personally I opted for the higher end of the hobbiest jointer spectrum and got the PM 882HH. (Helical head and parallelogram beds). I intend this to be the only jointer I ever buy so what the heck. From all of the people I spoke to it was the easiest to setup and was nearly dead nuts from the factory with little to no adjustment required. So my criterion were heavily weighted in the "easy to setup" category. For planers I did it a little differently... I went with the Dewalt 735x which most everyone says is the best bang for the buck as far as planers go. I considered going Grizzly and even PM but the cost was simply too high right now... At some point I may put the Shellix(helical) head in it. By saving money on the planer I was able to get a Jet Drum sander which I felt would be helpful with the projects that I have planned... Of course your path is yours to tread and I am sure there will be no shortage of good er better advice provided here.. P.S. Where did the term "dead nuts" come from... everybody I meet in woodworking seems to use that term for something that is spot on. Quote
AstroDave Posted December 3, 2014 Report Posted December 3, 2014 First question is if you have 220 power ? Oh yes forgot about the 220... Had to get my shop wired up with was about a 2K additional expense that I didn't initially consider. Quote
Firehawk Posted December 3, 2014 Report Posted December 3, 2014 "In the scale industry which dates back to the beginnings of measurement; Dead Naught or the point at which there is no movement of scale is Dead Zero. Naught is the arithmetical symbol 0(Webster). Zero was replaced with Naught having the same identifier as a position of "Zero". One can look at the orientation in Nautical and Firearm (Military) Terms (As described in earlier accounts, and restated here): The point of departure in reckoning; specifically : the point from which the graduation of a scale (as of a thermometer) begins (2) : the temperature represented by the zero mark on a thermometer b : the setting or adjustment of the sights of a firearm that causes it to shoot to point of aim at a desired range. The Dead Nuts is simply the wrong spelling for Dead Naught but is well accepted and will remain a constant for many years to come. Remember before we had digital scales there were threaded nuts that were locked in place to set the zero. A scale adjusted to and set to zero has "Dead Nuts". 2 Quote
estesbubba Posted December 3, 2014 Report Posted December 3, 2014 I think an 8" jointer and 15" planer are a great combination. A 15" planer is a huge upgrade over a lunchbox. Both my 6" and 8" jointers were dovetails and I found shimming them easy. I have the book "care and repair of shop machines" which makes tuning a lot easier than the manuals show. Quote
Trip Posted December 3, 2014 Report Posted December 3, 2014 ==>Dead Naught or the point at which there is no movement of scale is Dead Zero For some time, I’ve carried the rather dubious honor as WTO’s “King of Arcane Knowledge”… I now pass that mantle to someone more deserving… Quote
woodbutcher74 Posted December 3, 2014 Report Posted December 3, 2014 "Naught from naught is zero. I learned this in my sixth grade education" Jethro Bodine Quote
bushwacked Posted December 3, 2014 Author Report Posted December 3, 2014 Yes I will have 1 220 that I know of. That $2k for wiring up more 220s has not crossed my mind. That is a good point to consider though. I have seen a lot of people talk about the dewalt 735. So that's a good one to start with and will work well for years if I need it to? How does grizzly stand with their quality? Quote
AstroDave Posted December 3, 2014 Report Posted December 3, 2014 I think we've bushwacked Bushwack's thread... No more naughty talk...back on topic please. Quote
bushwacked Posted December 3, 2014 Author Report Posted December 3, 2014 I think we've bushwacked Bushwack's thread... No more naughty talk...back on topic please. Haha no worries. I learned something too Quote
..Kev Posted December 3, 2014 Report Posted December 3, 2014 Yes I will have 1 220 that I know of. That $2k for wiring up more 220s has not crossed my mind. That is a good point to consider though. I have seen a lot of people talk about the dewalt 735. So that's a good one to start with and will work well for years if I need it to? How does grizzly stand with their quality? So, the 735 is a great unit! Big price difference tho between that and the Grizzly which works great as well. I have the grizzly (about 5 years now) but, when she dies, I'll replace it with the 735. So, with the jointers, Grizz is probably the most bang for the buck but, will also take the longest to get it dialed in. PM and Jet are both probably better units so, let your wallet be your guide. Quote
bushwacked Posted December 3, 2014 Author Report Posted December 3, 2014 So, the 735 is a great unit! Big price difference tho between that and the Grizzly which works great as well. I have the grizzly (about 5 years now) but, when she dies, I'll replace it with the 735. So, with the jointers, Grizz is probably the most bang for the buck but, will also take the longest to get it dialed in. PM and Jet are both probably better units so, let your wallet be your guide. Oh wow. Like it that much huh? Then that seems like a definite top couple on the list for planers Is the dewalt pretty much a unbox and go or does it have a long setup time? Quote
..Kev Posted December 3, 2014 Report Posted December 3, 2014 I have a PM jointer and am super happy with it. I also would not have hesitated to buy the Grizz unit. If you're going 8", then I would recommend a bigger 220 unit which ever way you decide to go. Quote
Tom Cancelleri Posted December 3, 2014 Report Posted December 3, 2014 I have a Grizzly G0593 8" jointer with helical head. I bought it from a guy who built desks, builtins and offices for politicians (he said he did the office for Dick Cheney and a few other big names) Had to shut his shop down for health reasons. Liquidated his stuff real cheap. Back to the Jointer, it was in really good shape when I got it, everything is flat and aligned without having to shim anything. As a stupid mistake I didn't buy the 15" grizzly planer and 10 sets of knives for $250 because I didn't have the room for it at the time. I opted for a Dewalt 735X like everyone else due to it's size, capability and it being the best bang for the buck. You can usually get it on sale with a free stand, which is a nice little bonus. Parallelogram jointers are real nice and easy to setup and adjust, however there's a point where things work as they are and do a good job, if you need to make an adjustment once a year or so, so be it. I'd personally save that money and get another tool. Quote
Freddie Posted December 3, 2014 Report Posted December 3, 2014 My jointer is a Grizz G0495x and planer is dewalt 735. The jointer has the grizz version of the helical head and its a great solid jointer. The planer is good, but I always wanted more. I am currently on strike as far as tool buying goes, but would love to have a bigger more robust planer. Quote
AstroDave Posted December 3, 2014 Report Posted December 3, 2014 Do it ... Do it... I am sure this sale happens fairly often... My local Woodcraft made me a deal that was pretty close to this... http://www.rockler.com/dewalt-dw735x-13-in-2-speed-planer-includes-knives-table-and-stand Quote
tedfmcm Posted December 3, 2014 Report Posted December 3, 2014 In the process of setting up my shop and have run two 220v circuits so far...one 15amp for the table saw and any other tool since only one will be used at a time, and a 20 amp for dedicated dust collector. I'm not an electrician but a knowledgable DIYer who did his homework - 220 is not complicated....just as easy as 110 so if you're comfortable running those circuits save yourself the 2k. Especially if you have the space in your breaker box it's a no brainer. You can even use regular Romex (sized appropriately) and just tape the white wire black. Just my $0.02 Quote
Eric. Posted December 3, 2014 Report Posted December 3, 2014 ==>Dead Naught or the point at which there is no movement of scale is Dead Zero For some time, I’ve carried the rather dubious honor as WTO’s “King of Arcane Knowledge”… I now pass that mantle to someone more deserving… gargle? 1 Quote
wdwerker Posted December 3, 2014 Report Posted December 3, 2014 I always thought dead nuts was a reference to all the old guys that you find on woodworking sites ! < evil grin > Quote
customwood montrose Posted December 3, 2014 Report Posted December 3, 2014 Anything with a spiral cutterhead is worth it if you do any wild grain woods or rustic with knots. I wish my jointer had one. I don't have the models you are looking at but have a Grizzly 20" spiral head planer, we have replaced the motor with a Baldor one after having the Grizzly one rebuilt 3 times in 5 years. Otherwise the planer has exceeded my expectations by surviving for over 10 years in a commercial shop and planning over 100,000 board feet. (I'm not exaggerating) Hope this helps. Dustin Quote
Trip Posted December 3, 2014 Report Posted December 3, 2014 ==>gargle? ??? Sorry, I'm slow on the uptake after midnight... ==>spiral cutterhead is worth it if you do any wild grain woods or rustic with knots. I wish my jointer had one There are numerous threads here and other forums regarding jointers and helical heads... The issue isn't quite a cut-dry as craftsmen think (and certainly not after Sales/Marketing pushes that narrative in every conceivable way)... Here's a link to the most recient thread... ?do=embed' frameborder='0' data-embedContent> and Non-helical segmented and/or spiral heads have no real benefit whatsoever, except to manage power... For jointers (depending on which you have), you can get knives that change quickly and have alternate geometries to manage wild wood... I would urge you to read some of the other threads to get a bit more background... I believe Marc has a video covering jointing wild wood… Helical heads have far more utility when thickness-planning... But that's another topic... If I had to choose, I’d get a jointer with one of the fast-change knife systems and invest the available budget on longer/wider beds, more HP, etc… I use an insert systemf, so don’t have any skin in this game… I have no problem face-planning, and only see issues edge-jointing with the most wild interlocked grain… I have a seperate set of knives with a higher effective angle of attack when the going gets tough... Quote
Eric. Posted December 3, 2014 Report Posted December 3, 2014 ==>gargle? ??? Sorry, I'm slow on the uptake after midnight... google...the dead nuts info was found on google...you can keep your title. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.