Tom Cancelleri Posted April 4, 2015 Report Posted April 4, 2015 It's here! Just picked it up from Woodcraft. All my friends and family are unavailable or out of town. So how do you move 312 pounds solo? I used to deliver 200 pounds tvs solo. I slid the saw box half way off the bed of the truck controlled it slowly to the ground, hand truck it, and roll it over the lip, into the shop. I guess i know what I'm doing tonight. 1 Quote
Eric. Posted April 4, 2015 Report Posted April 4, 2015 Sweet. It's an easy assembly...did mine solo in no time at all. 1 Quote
Tom Cancelleri Posted April 4, 2015 Author Report Posted April 4, 2015 Sweet. It's an easy assembly...did mine solo in no time at all. Excellent, I ordered the mobility kit yesterday and it go there today as well. Quote
Immortan D Posted April 4, 2015 Report Posted April 4, 2015 Be careful. I too unloaded alone my 14'' bandsaw from my truck. The box hit the floor on top of my middle finger, which literally exploded and needed surgery. Quote
wdwerker Posted April 4, 2015 Report Posted April 4, 2015 I learned to put a board under any box being tipped over a tailgate, loading dock etc. to spread the load out and prevent damaging the contents. Quote
Trip Posted April 4, 2015 Report Posted April 4, 2015 ==>which literally exploded and needed surgery Ohhhh, that hurts just thinking about it... The last significant accident in my shop occurred as the riggers set the wide-belt sander... It was a four-man team… Through a miss-communication, one of riggers was on the wrong end as the machine was set… His finger was all that separated a 2K+lb machine and the concrete slab… Happened so fast, he didn't even feel it... ==>family are unavailable or out of town Actually, I plan my tool deliveries for when the wife is out of town... and that's no joke -- upon return from a multi-day outing, one of the first things she looks for is evidence of tool deliveries... I'm working towards my JCTA certification: Quote
Woodenskye Posted April 4, 2015 Report Posted April 4, 2015 Tom Enjoy the new saw, and the set up process. Quote
Immortan D Posted April 4, 2015 Report Posted April 4, 2015 Happened so fast, he didn't even feel it... I was spreading blood all over the place but still wasn't feeling any pain at all. In fact, I wrapped my finger with a dirty rag and lifted the saw... I obviously wasn't thinking straight. Quote
Tom Cancelleri Posted April 4, 2015 Author Report Posted April 4, 2015 Saw is together, age is still on my side, though I will sleep well tonight. Just need to install the fence buff the wax off the table, install the blade and do the tweaking. Oh yea and put down a few beers, because the part of standing it up was a bear of a job. Quote
Chet Posted April 5, 2015 Report Posted April 5, 2015 I have had mine for a short time but I can tell you you will enjoy it. Mine was delivered by UPS freight and the A--hole driver wouldn't move it any further the the gutter on my street even after dispatch told me he would but it by the garage door. Fortunately my daughter and family live next door and my son in law helped me put it on a flat dolly and roll it up the driveway. Quote
Tom Cancelleri Posted April 5, 2015 Author Report Posted April 5, 2015 So far so good, I'm impressed with the build quality. Ease of assembly. I have 1 complaint. I had to file a large burr off a washer, and I had issues getting the throat plate out, it was covered in that anti rust goo and was stuck in the table. Quote
Chet Posted April 5, 2015 Report Posted April 5, 2015 Yea, mine was stuck too. Finally popped it loose from below with a 1" wooden dowel and my dead blow mallet. Quote
Janello Posted April 5, 2015 Report Posted April 5, 2015 Grats on the new wood weapon! It's amazing what can be done solo, when it means enough to you. Wife asked me to mop the floor today and I needed help. Powermatic Saw showed up and I got that puppy in place no problem. 2 Quote
Tom Cancelleri Posted April 5, 2015 Author Report Posted April 5, 2015 Yea, mine was stuck too. Finally popped it loose from below with a 1" wooden dowel and my dead blow mallet. I tightened the throat plate leveling set screws, that got it loose so I could get it out. Broke that goo suction. Quote
Tom Cancelleri Posted April 5, 2015 Author Report Posted April 5, 2015 Grats on the new wood weapon! It's amazing what can be done solo, when it means enough to you. Wife asked me to mop the floor today and I needed help. Powermatic Saw showed up and I got that puppy in place no problem. Get to work early and work, oh man I can't do that. Wake up super early to drive 100 miles to pick up a tool? Hell why even sleep just leave now! Quote
Tom Cancelleri Posted April 5, 2015 Author Report Posted April 5, 2015 Because there is no such thing as finishing tomorrow, I finished setting up the saw. Installed the blade, did all the stuff that needed to be done to tune it. Wheel brush, unreachable to move and adjust it's barely even touching the wheel. Lower blade guides were a bit of a pain to setup. I used my feeler gauges to set the guides 5 thou from each side of the blade. adjusted the tracking and set the table to 90 and all that fun stuff. Powered it on, it's pretty quiet and extremely smooth. Decided to try slicing a veneer on some ornamental pear tree that I had in my yard that I had cut down. Ornamental pear smells like, looks like and when quartersawn flecks like red oak. checked the thickness of the veneer I sliced. Which had a really nice finish on it, that shear force blade is killer. End 1 End 2 Off by .5 thou, can't say I've ever cut something that close on initial setup without making any adjustments. Quote
roadmutt Posted April 5, 2015 Report Posted April 5, 2015 I know the feeling. Had to take mine back by myself opened box took all the little parts back and then used the garden wagon. Worked out good. Quote
Brendon_t Posted April 5, 2015 Report Posted April 5, 2015 Suweett. I live new tool deliveries. I usually drop a hint to mynext for neighbor who is also a retired Marine. He gets so excited he'll be out there when the truck pulls up. Built in help. 1 Quote
cstandi1 Posted April 5, 2015 Report Posted April 5, 2015 I backed my truck into the garage and unboxed in the bed. Once the base was assembled I stood the saw up and rigged it to a 4 pulley system and lifted the saw off of the bed of the truck. Pulled the truck out then lowered the saw onto the bas and bolted into place. I did the same thing with my Sawstop, makes one man assembly of things like this a breeze. Quote
Brendon_t Posted April 5, 2015 Report Posted April 5, 2015 Word from the stupid: If you secure a heavy object to a 12" thick beam that protrudes outside the garage that LOOKS like it runs the entire apex of your garage ceiling. Ensure it does. Once you hit the up button on the winch, that decorative portion of beam that is secured by two toenailed 3" nails hurdles down at your head at the speed of light. If you don't heed this warning, don't turn around to make sure nobody saw your idiocy in action because you will see the hot nanny across the street trying not to chuckle... 1 Quote
ColinF Posted April 5, 2015 Report Posted April 5, 2015 Word from the stupid: If you secure a heavy object to a 12" thick beam that protrudes outside the garage that LOOKS like it runs the entire apex of your garage ceiling. Ensure it does. Once you hit the up button on the winch, that decorative portion of beam that is secured by two toenailed 3" nails hurdles down at your head at the speed of light. If you don't heed this warning, don't turn around to make sure nobody saw your idiocy in action because you will see the hot nanny across the street trying not to chuckle...I know you said something but you lost me at "hot nanny" and now I can't help but think this thread is worthless without pics! Quote
TheFatBaron Posted April 7, 2015 Report Posted April 7, 2015 T - as soon as the electrical work is done in my basement, I'll be order this exact saw. Can you describe how the saw is packed? I have steel doors that open to a set of steps going down into my basement. I can probably manage the whole box with a couple friends and ramps and/or a hand truck, but I figure it might be safer to take the large parts down individually. Quote
Tom Cancelleri Posted April 7, 2015 Author Report Posted April 7, 2015 T - as soon as the electrical work is done in my basement, I'll be order this exact saw. Can you describe how the saw is packed? I have steel doors that open to a set of steps going down into my basement. I can probably manage the whole box with a couple friends and ramps and/or a hand truck, but I figure it might be safer to take the large parts down individually. TFB, the top of the styrofoam had the base sides, then after you open the styrofoam there's the fence rail, fence, and the table. On the bottom of the styrofoam is the base legs, then the main bandsaw is inside of the styrofoam. It's packed really well. Quote
Chet Posted April 7, 2015 Report Posted April 7, 2015 T - as soon as the electrical work is done in my basement, I'll be order this exact saw. Can you describe how the saw is packed? I have steel doors that open to a set of steps going down into my basement. I can probably manage the whole box with a couple friends and ramps and/or a hand truck, but I figure it might be safer to take the large parts down individually. I would probably go with the whole box and friends there are real nice hand holds on each end of the box. Or just you and an appliance doll would work down step, kind of like moving a real small refrigerator. I think moving the main bandsaw out of the box down steps might be a bit awkward. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.