Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Shop Rearrange Revision 10?

Featured Replies

With the new planer arriving next week I need to think about where it's gonna go, it's not gonna be mobile like the 735 is. I also need a more efficient setup and to start thinking about ducted dust collection.

Here's my current layout (I moved some stuff like grinders, tormek, and bench top HCM and tool bench to the utility room in the basement to make some more room in the shop.

oldshop.jpg

 

 

New idea for setup. Can't find a good spot for the drum sander though.  If anyone has any ideas on how to improve on this, please by all means make your suggestions.

Shop_12_2_15_a.jpg

Shop_12_2_15_b.jpg
Shop_12_2_15_c.jpg

Shop_12_2_15_c.jpg

Shop_12_2_15_d.jpg
Shop_12_2_15_e.jpg

just some thoughts ..

 

Turn the roubo 90 degrees .. 

pull the tablesaw back a few feet from the roubo and that looks like it would open that end of the shop up for planer and drum sander ...

 

something like this ... 

12-3-2015_1-33-02_AM.thumb.jpg.4564e3287

 

Edited by bushwacked

How important is it that the roubo be out in the middle of the floor? With that against the wall you have better options for table saw and planer out in the middle where you can create a walk around to all the other tools against the wall.

Something along these lines.

 scanJA0001.pdf

 

Edited by Janello

How important is it that the roubo be out in the middle of the floor? With that against the wall you have better options for table saw and planer out in the middle where you can create a walk around to all the other tools against the wall.

That's definitely true but having the Roubo against a wall sucks.  I tried to get away with that when I first built mine and it was a major disappointment.  It's like having a Porsche with only two gears.  To get the most out of a bench like that you really need easy access to both sides.  Not so much for hand tool work but for working larger pieces with handheld machines and especially for oddball glue-ups.  I do most of my regular glue-ups on my outfeed table but the Roubo is the master of oddball glue-ups...that versatility is greatly diminished if it's up against a wall.

I don't have a roubo yet, so the question was a little for my selfish curiosity. I still think your killing yourself by throwing that monster out in the middle for so many other operations, that if it were me, I'd deal with it against a wall. Again, don't own one yet so I'll let you know in 2 years how I really feel about it. :P

Edit: I don't think I will even have a choice once I build my roubo. It's gonna be against a wall whether I like it or not. Mostly because having my Table saw out in the middle is a must and trumps pretty much all else. 

Edited by Janello

I am curious, I noticed here and the other day Eric posted a couple of shop pictures and both of you have your Table saw facing away from the main shop area.  Mine is is basically in the same spot, in front of the garage door but facing into the shop.  Is there a reason for having your back to the shop when using the table saw?  

Edited by Chet K.

I really need to figure out how to make these shop layouts in sketch up. Any video tutorials you know of?

I am curious, I noticed here and the other day Eric posted a couple of shop pictures and both of you have your Table saw facing away from the main shop area.  Mine is is basically in the same spot, in front of the garage door but facing into the shop.  Is there a reason for having your back to the shop when using the table saw?  

The main reason is it condenses my "work area."  If the business end of the saw was nearer the garage door, it would just mean more walking every time i needed to make a cut.  This way it's closer to my bench and the center of the shop.

Also if it faced into the shop, I'd have to open the garage door much more often to accommodate long boards.  As it is I can just barely rip a full 8' board without opening the door...that number would be closer to 5' if the saw was turned around.

  • Author

Yep! Exactly what Eric said. Keeping me from having to go to the other side of the table and go around machines to get to the saw. 

That makes a lot of sense.  I almost always have the door open when I work, the business end toward the garage door this has allowed me to have the saw closer to the door which gives me a little more room in the shop its self.  My area is only 18ft. wide and 16 ft. long and I am trying to figure out how to get a work bench of some sort in there with out having to walk sideways to get between things.

 

  • Author

I really need to figure out how to make these shop layouts in sketch up. Any video tutorials you know of?

Brendon, I'm a complete sketchup spaz. 75% of the time I move a machine I raise it up and the damn thing is floating and I need to bring it back down. The tools are available in the 3d warehouse for download and use. There's a fair amount of tools in there. Basically all you're doing is setting a size for the floor that equals your space layout. then just drag tools onto it. There's plenty of people who build all these shelves and other fancy crap in their  layouts, but that's pointless to me since I don't GAF!

Yep! Exactly what Eric said. Keeping me from having to go to the other side of the table and go around machines to get to the saw. 

The main reason is it condenses my "work area."  If the business end of the saw was nearer the garage door, it would just mean more walking every time i needed to make a cut.  This way it's closer to my bench and the center of the shop.

Also if it faced into the shop, I'd have to open the garage door much more often to accommodate long boards.  As it is I can just barely rip a full 8' board without opening the door...that number would be closer to 5' if the saw was turned around.

That makes tons of sense. When i get everything set up better I will have to look into that. 

 

That's the problem I have.  Everything is off vertically. 

This may or not make sense, or you may already know it - it's all about dragging it along the correct axis line. As you move it around it will sort of attach itself to one axis or another, you just gotta make sure its the one you want. I like to move it, and once I know its on the right axis, I finish it off by typing in how far I want it to move so that I don't mess it up with a full mouse move. 

 

I really need to figure out how to make these shop layouts in sketch up. Any video tutorials you know of?

at your age, stick to graph paper

That's the problem I have.  Everything is off vertically. 

Find the lower edge of whatever you need, a corner works best. When you get to the plane you need it to touch (floor, table, etc), it will stick a little and ride that plane for a moment before going further.

Tom, don't know if this will work for your shop but something similar did in mine. The planer tables were higher than jointer tables, and the drum sander was higher than the jointer and table saw. This allowed me to cluster all 3 and be able to work 8' long boards. I do have my drum sander on casters which raised it 3-4". Now the table saw looks crowded, but if you never cut big panels on it you might be good. I think if you find an area to make the jointer/planer/DS cluster work you can save a lot of space and only need a single dust collection drop. 

TomShop2_zpskl4y7by0.png~original

 

 

  • Author

Tom, don't know if this will work for your shop but something similar did in mine. The planer tables were higher than jointer tables, and the drum sander was higher than the jointer and table saw. This allowed me to cluster all 3 and be able to work 8' long boards. I do have my drum sander on casters which raised it 3-4". Now the table saw looks crowded, but if you never cut big panels on it you might be good. I think if you find an area to make the jointer/planer/DS cluster work you can save a lot of space and only need a single dust collection drop. 

TomShop2_zpskl4y7by0.png~original

 

 

Mike, that's pretty sweet and looks like it just might work. I'll have to give it a try once I do this whole rearrange and electrical thing.

Tom here are pictures of my old shop layout which worked out pretty good. You can see how the tables for each machine cleared each other. By luck my UTS and table saw outfeed table actually supported longer boards for the drum sander. 

http://suiteronline.com/shop-tour/

Something that I have not seen in any of the shop layouts on this site is turning the Planer or some other tool on an angle.

One of my previous shops I turned the planer so it faced away from a corner and you could get longer stock through it.

Something that I have not seen in any of the shop layouts on this site is turning the Planer or some other tool on an angle.

One of my previous shops I turned the planer so it faced away from a corner and you could get longer stock through it.

That's exactly what I did in my current shop to allow for longer boards on the jointer, planer, and drum sander.

EB233F04-5E30-4A51-B896-F6398A6A95DA_zps

 

AFE0320B-2F2E-4904-AE90-36818B030FBA_zps

 

I can't tell you how badly that inflames my OCD bone.  Could never handle that in my shop, even if it was more efficient.  I'd be dizzy and nervous in there.

I can't tell you how badly that inflames my OCD bone.  Could never handle that in my shop, even if it was more efficient.  I'd be dizzy and nervous in there.

Amen to that!

Same here...

I don't exactly lay-out my tools on a grid, but even a slight diagonal would bother me... As an example, many of my tools are on mobile bases... So when I move them to clean underneath, I re-position them back to the starting position even though I really don't have to... Got to be some sort of OCD at work...

Might make an interesting WTO Poll... Some sort of OCD indicator on Woodworkers -- any psychologists in the studio audience?

Edited by hhh

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.