Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

vix bit, where have you been all my life?!

Featured Replies

image.thumb.jpeg.7d40a1c39d48069bd94db6a

I installed 22 drawers in the last while.  Decided, before beginning, that i would invest in a vix bit - what an awesome tool!

i bought a number 6 bit, for installing no.6 screws for blum and side mount slides.  the unit was like 8 bucks!  if you dont have one, put it on your christmas list!

 

 

Edited by Pug

I agree they are awesome. Where did you get yours? Lee Valley? Sent from my SM-P550 using Tapatalk

I don't but would like one, looks like it centers in the hole in the hinge?

I couldn't install a hinge without one. I wish they made one for tiny little box hinge screws.

I picked up one at Lowes yesterday for $4.99. This one is a little different than the ones I've had in the past - it has a replaceable bit.

==>I wish they made one for tiny little box hinge screws.

They do... I've got a set that includes centers for #2 and #3 screws... I believe it's a Vix #3, but I forget... If you can't find it, I'll look in the shop...

==>I wish they made one for tiny little box hinge screws.

They do... I've got a set that includes centers for #2 and #3 screws... I believe it's a Vix #3, but I forget... If you can't find it, I'll look in the shop...

Yes, I have a #3. Unfortunately, it is just a smidgeon too large for the Brusso hinges I use on boxes.

I have settled on using the #3 Vix to drill a super shallow counterbore hole for the shank which has no threads on the tiny screws, and then free-hand drill with one size smaller bit than the 5/64" of the #3 Vix for the portion of the hole which the screw will thread into. That way the vix still helps to keep the center in the usual way. But it's more delicate than I would like. A #1 Vix would be the ticket.

  • Author

I agree they are awesome. Where did you get yours? Lee Valley? Sent from my SM-P550 using Tapatalk

Yup, lee valley!

I agree they are superb. I have used them for years and currently have a set of 4 - for all different sizes of hinge including Brusso smaller hinges.

Edited by TerryMcK

I couldn't install a hinge without one. I wish they made one for tiny little box hinge screws.

I bought these. I used it for installing some small box screws. This set will do holes for sizes 3,4,5,6,8,9 

http://www.amazon.com/3pc-Vix-Bit-Hex-Shank/dp/B001UQQSZO/ref=sr_1_3?ie=UTF8&qid=1450082679&sr=8-3&keywords=vix+bit

I bought these. I used it for installing some small box screws. This set will do holes for sizes 3,4,5,6,8,9 

And 10 ... so sayeth the Amazon.

agree with pug 100%, they are a great addition to the shop, i always hated installing hardware, it was my least favorite thing to do but not anymore, buy a few and enjoy putting on hardware

==>A #1 Vix would be the ticket

Yea, that'd be the ticket...

 

After reading your workflow, I seem to remember doing something similar... I raised the 5/64th bit in the housing so it would only penetrate enough for alignment... Anyway, that's what I used to do...

These days, I tend to use the Starrett centering hinge punch on very small hinges and drilling directly with a 1/16": http://www.starrett.com/metrology/product-detail/Punches-and-Sets/Precision-Shop-Tools/Precision-Hand-Tools/Precision-Measuring-Tools/819

I also put a drop of CA in the hole for final assembly... The CA reinforces the fibers for such small screws. Since I wax the screws, the CA doesn't stick and allows dis-assembly, if needed...

Recently, I read an article (I forget which magazine or book, but it was a well-known name) where the author epoxies the hinges and uses faux screws. He just nipped off the threads and it allowed him to easily clock all his hinges... While interesting (and can see his point on clocking lots of fasteners in a large piece -- especially in an exotic), I'm not really sold on the idea... It's like building a case piece with ten drawers and making them all through dovetials and applying a faux front (and using cock beading to hide the fact --- which I've been known to do with some regularity)... I'm tempted to try it.. Any thoughts from the peanut gallery on epoxying hinges?

 

These days, I tend to use the Starrett centering hinge punch on very small hinges and drilling directly with a 1/16": http://www.starrett.com/metrology/product-detail/Punches-and-Sets/Precision-Shop-Tools/Precision-Hand-Tools/Precision-Measuring-Tools/819

I also put a drop of CA in the hole for final assembly... The CA reinforces the fibers for such small screws. Since I wax the screws, the CA doesn't stick and allows dis-assembly, if needed...

Good tip, Trip! In some species, it's really hard to keep from stripping.

Good tip, Trip! In some species, it's really hard to keep from stripping.

Yes. I'm gonna get me one of those. I see it is a little cheaper on AZ.

 

 

Recently, I read an article (I forget which magazine or book, but it was a well-known name) where the author epoxies the hinges and uses faux screws. He just nipped off the threads and it allowed him to easily clock all his hinges... While interesting (and can see his point on clocking lots of fasteners in a large piece -- especially in an exotic), I'm not really sold on the idea... It's like building a case piece with ten drawers and making them all through dovetials and applying a faux front (and using cock beading to hide the fact --- which I've been known to do with some regularity)... I'm tempted to try it.. Any thoughts from the peanut gallery on epoxying hinges?

I could see where there may be special situations where you would want to epoxy a hinge (say a very thin lid with no room for screws), but I wouldn't do it on a regular basis. The inability to disassemble, the expense, the clean-up of epoxy, and lack of any distinct and discernible advantage in regular applications; all would induce me to use the screws.

==>I wouldn't do it on a regular basis

I wouldn't do it in a regular basis either...

I'm looking at it from a clocking perspective -- as did the original author... Clocking two hinges is no big deal... However, clocking six or eight sets of hinges in Hard Maple is a pain... I've got a build in queue with quite a bit of hardware -- I'm tempted to give it a go, just to see for myself...

==>I wouldn't do it on a regular basis

I wouldn't do it in a regular basis either...

I'm looking at it from a clocking perspective -- as did the original author... Clocking two hinges is no big deal... However, clocking six or eight sets of hinges in Hard Maple is a pain... I've got a build in queue with quite a bit of hardware -- I'm tempted to give it a go, just to see for myself...

I would be interested in hearing how it turns out.

It seems like securing the piece/hinge while the epoxy dries could be tricky. A clamping conundrum.

I'm glad you mentioned clocking. It's something I haven't paid much attention to. Usually I'm pretty happy if I can just get a nice clean fit in the mortise and my drill holes centered fairly precisely so the hinge pulls up tight. Clocking is something I should consider to get that extra level of craftsmanship. You know, not the ultra OCD clocking, but just keeping the thought in mind and taking advantage when it's possible. To my mind clocked screws are something which registers on an unconscious level for the average person. For example, most people wouldn't necessarily notice if all the switch plates in their house had clocked screws, but they would feel it.

==>It seems like securing the piece/hinge while the epoxy dries could be tricky

The author did not outline the procedure... Noodling on it, here is my proposed process... Anyone see issues?

I'll drive steel screws with a release agent until the epoxy cures, then switch to brass screw heads for clocking... As long as it's withing 24hrs, just a drop of epoxy to secure the faux-clocked heads..

Provided the screws are secured with epoxy or something similar, there's no need to clip the heads.  You can just screw them in and let them strip while getting them clocked.  For that matter the screw would still hold after the epoxy cures, so there's a method for you.  Support both sides and let your stripped screws hold everything down for the curing time.

==>let them strip while getting them clocked

Worry about snapping the head and scoring the hinge... I usually use 'antique' finish hinges which show any small slip...

I smell what you're cooking.  I was thinking softer wood.  That seems to strip out when you look at it wrong.  You can still do a version of this though.  Pre-drill with a larger bit.

==>It seems like securing the piece/hinge while the epoxy dries could be tricky

The author did not outline the procedure... Noodling on it, here is my proposed process... Anyone see issues?

I'll drive steel screws with a release agent until the epoxy cures, then switch to brass screw heads for clocking... As long as it's withing 24hrs, just a drop of epoxy to secure the faux-clocked heads..

I don't see any issues with driving a steel screw and then replaceing it later. What do you use as a release agent for epoxy? I see that West Systems mentions a PVA mold release as well as hairspray or carnauba based car wax as a possible substitute.

==>What do you use as a release agent for epoxy?

Whatever's at hand... There's no magic... Standard mold release agent, Renaissance wax, WaxiLit -- whatever...

I'm talking myself into trying this as an experiment... If I do, I'll report back...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.