Recommended Posts

Posted

Does anybody have any experience with the ryobi one+ system? Is it any good? There are a lot of tools in that line up and they are pretty economical, of course with cheaper price generally comes lesser quality but it doesn't look that bad. I am looking at the drill and impact driver by the way.

-Jon

Posted

AvE on youtube recently did a review of their cordless nailer.  The overall construction seemed to be much cheaper than the big name tool brands but some of the internals seemed to be pretty nice.  Should give you an idea of the overall quality of the brand. 

 

 

Posted

I've had a set for years - probably going back to 2006-ish.  I'm on my second batch of batteries and they're coming close to their end of life.  But the tools have been fine.

I got a kit - I believe it was drill, sawzall, circular saw, flashlight... then I added an impact driver and a right-angle drill. 

Drills & impact driver are fine - they do exactly what they're supposed to do, spin bits.  I've never had a problem with them - I really like the impact driver though it's not really a fine woodworking tool.

The circular saw is a joke.  I only use it when I'm doing a carpentry job around the yard and it's too far to run an extension cable.  I'm always bummed.

Sawzall is somewhere between "poor" and "ok" -  like the circ saw, I only use it when I'm too far from an outlet to run an extension cable.

Flashlight... c'mon - who really wants to use a flashlight with an enormous battery on it?

 

 

 

 

 

 

 

 

 

Posted

Is it worth picking up a few of there tools or should I invest in the Milwaukee line of tools? I am a pretty active hobbyist and use drills almost daily, I have been using a $30 black and decker for the past 2 years so clearly pretty much anything will work but is it better to go with Milwaukee?

-Jon

Posted

I've had a set and an additional drill+driver for about 5 years. For light use in the shop and around the house they work well. I'll echo the comments above, the circular saw is not great, and really only used where I need to make one cut and don't want to drag out the extension cord. Right angle drill, sawzall are OK, drills and drivers and functional and work well for the price.

Quality is what one would expect and batteries hold up fine. One of the drills the chuck is a bit iffy and likes to loosen up on me. If they broke on me today I'd probably downsize as I don't need all the pieces of the set and go with a brushless system from Dewalt/Bosch/Hilti/Milwaukee.

I do like to use higher quality bits (and screws) which was probably the major source of my frustration with previous products.

Posted

My fiance received the drill and two bats as a gift her first year in her own house. I was poor 3 years ago, so I decided to tack on the impact driver bare tool for $35ish after coupon. The drill is fair, but the chuck slips. The impact driver is a sleeper of a tool. I used both every week for about a year until my dad bought me the 20v lithium brushless hammer drill/impact driver set from dewalt. Needless to say, the dewalt is much better, but the ryobi stuff isnt the trash you would expect it to be. 

Posted

The Millwaukee is sooo much better than Ryobi. If you can afford the price it's money much better spent if it's used for anything more than occasional home handyman duty.

Posted

Depends on your usage. My coworker has been running about 10 tools in that set for a couple years. Short answer... they suck.

.

But if youre rarely using them theyll get you by. The impact is fast on normal woodscrews but lacks the torque to drive bigger stuff like 4" screws, lags and timberlocks whereas my milwaukees are unstoppable. Full disclosure, the ryobi actually drives faster than the milwaukee, until it hits thats wall.

.

The drill is a weak piece of junk. Worthless for anything beyond small holes in wood. Hes replaced it twice because it just loses its power.

.

In 2 years hes had to replace nearly 10 batteries. They just lose the ability to charge.

.

My opinion, spend more and get milwaukee, makita or bosch.

Sent from my SAMSUNG-SM-G890A using Tapatalk

Posted

i have drill, impact driver, nail gun, reciprocating saw, circular saw and all seem to work fine.  I only use the nail gun for quick things, though when i am too lazy to get out the air hose etc.  have only used the saws a few times.  the drill and impact driver get a lot of use and do fine

Posted

I run an impact driver, drill/driver and sawzall from this line.  I am a hobbyist, but use them for everything from automotive to framing to woodwork.  The lithium batteries are holding up well.  I used the drill/driver for my fence and later my new deck.  Bought the impact driver when I did the deck and it rocks on outdoor carpentry.  I also have a Milwaulkee M12 drill/driver and it is a great tool as well.  I use the sawzall for tree trimming.  It can drain a battery, but as long as you keep it freshly supplied it is great.  I DO use the flashlight around the house and on camping trips.  It is just convenient to be able to set it down and point it. 

The pros use other stuff, but I have more than gotten my money's worth out of the few I own.

Jeff in KC

Posted

I have a Dewalt 12V drill from 2004, still works great and I beat on that.

And I don't know what to do with it.   I bought a Milwaukee M12 drill/impact set two years ago so I never use the Dewalt.   The Dewalt is too good to throw away, but it's not really worth much to sell.

And that's why I think you should buy Ryobi, because when it stops working for you, you won't feel bad throwing it away. :-)

 

Seriously, I really like the 12 volt stuff.   Although my M12 drill there's something wrong with it so I'm either going to have to replace it or get it fixed.   The chuck makes some grinding sounds when I try to change bits.

 

Posted

I own the 18 volt drill, 36 volt (2 x 18 volt) lawn mower, edge trimmer, hedge trimmer and blower. They all do what they are designed to do. I noticed a MASSIVE difference in performance when the 18 volt 5 amp-hour batteries were used instead of the 18 volt 1.4  amp-hour's, especially with the blower and lawn mower. I also have protool and festool which are great and never let me down, both ends of the spectrum. Would I buy 18 volt Ryobi again? Yes.

Posted

I just gotta chime in here again because i hate to see anyone buy this cheap garbage. The main problem with the Ryobi stuff (aside from being weak) is the batteries. Over time they WILL all fail on you. The life gets shorter and shorter until they flat out wont charge. Ive seen it happen consistently with battery after battery, and they arent cheap to replace.

.

The price of a quality tool set is not that much higher, and when you start replacing $90 batteries, any perceived savings are gone and youre stuck with inferior tools.

.

If youre a painter who needs to remove a couple hinge screws every week....sure go ryobi. If you plan to use them regularly and want them to last, just dont do it. Buy once cry once.

Sent from my SAMSUNG-SM-G890A using Tapatalk

Posted

I wouldn't call Ryobi garbage, but the battery powered tools I have had in the past (pre-one+) worked no better, and batteries lasted no longer, than these DrillMaster tools from Harbor Freight.

http://m.harborfreight.com/power-tools/cordless-drills/18-volt-38-in-cordless-drilldriver-with-keyless-chuck-21-clutch-settings-69651.html

That is a single observation, take it for what it is worth.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 67 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined