Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

New Chisels - LN vs PMV-11

Featured Replies

Ok, so hopefully this hasn't been hashed out but I couldn't find anything.  

Im a hobbyist woodworker with a growing compilation of tools (hand and power) and decided it's time to upgrade to the last set of bench chisels I will buy (currently footprint chisels). 

Im thinking either the LN or the veritas pmv11 sets.  Obviously the veritas a bit more expensive, but much closer given the exchange rate and the LN design is supposedly designed to last longer.  I don't want to start a full blown A2 vs pmv11 debate as it seems it's pretty close if you sharpen regularly (unless someone have experience), but anything else I should consider when choosing between the two? I've read the LN handles might fit better for some? I have a LN fishtail chisel and I enjoy it (also all LN for my hand planes). 

Thanks!

Ted

I have the LN and enjoy them.  They feel well balanced in my hand and use the more than my blue spruce.  I haven't tried the LV but if u did I would because of the steel and the tang plus socket construction.

I own the LN's have tried the LV's. For me it came down to how they feel in my hand. I like the way the LN's feel in my hand more so than the LV's. 

Buy one of each (say a 3/4" and a 1") and try them out for yourself before committing to a full set. It wouldn't matter if you had an odd one unless you are OCD or if you don't like it - in which case you could sell it .

I have a full set of LN (good for general work), a full set of a German manufacturer (good for paring) and various old English manufacturers chisels. The LNs feel very good in the hand but so do all the others.

I'm also all LN for my new planes, but I like my Stanley Bailey chisels, I don't see myself replacing them anytime soon.

I've got both... So no skin in this game...

So much about hand tools comes down to how it feels in your hands -- and how sharp it is...

If you can, try one of each... See which you like.. Does Woodcraft sell both brands?

Both retain excellent resale value... Terry's spot-on... You could buy one of each and sell what you don't want for 80% of the MSRP...

I prefer the feel of the LN chisels because it's a round socket handle (which you can make more of yourself and really customize to your hand) vs the LV chisels which have a tang that is epoxied inside the handle. As far as steel types, they are both very good and both get the job done. I built my entire Roubo using my LN chisels without having to resharpen them (with the exception of dropping my 1/4" and dinging the corner) 

Ultimately it comes down to feel in your hand, I prefer a round handle versus an oval handle.  

  • Author

Thanks everyone, this confirmed my thinking - looks like I'm placing an order at LN today.

Yes, I would like all my chisels to match, so while a good and practical idea, I can't do the one of each haha.

I finally upgraded my sharpening stones to Shapton ceramics...and holy cow, what a difference.  I didn't know what I was missing out on.

  • Author

Well the 1 inch chisel is backordererd but got the rest...one shipment each from LV and LN today...?

 

image.jpeg

The only thing you may regret buying is the dowel plate. I consider that a good haul! :)

 

16 minutes ago, Tony Wilkins said:

I've gone back and forth on a dowel plate; why do you think it my be regret worthy Llama?

It is a true pain in the ass to smash wood through the damn thing! There is no nice way to say it. I have enough problems getting stuff done. I do not to be making dowels that can be bought for pennies a foot at any place that sells wood stuffs.

1 hour ago, Llama said:

It is a true pain in the ass to smash wood through the damn thing! There is no nice way to say it. I have enough problems getting stuff done. I do not to be making dowels that can be bought for pennies a foot at any place that sells wood stuffs.

Not to make this a highjack, but Lee Valley sells some really decent dowel in various hardwoods with pretty consistent, accurate diameter.

9 hours ago, Llama said:

It is a true pain in the ass to smash wood through the damn thing! There is no nice way to say it. I have enough problems getting stuff done. I do not to be making dowels that can be bought for pennies a foot at any place that sells wood stuffs.

The advantage of making your own is (1) you can choose your own wood, and (2) you can make them from rived wood, which is stronger.

Regards from Perth

Derek

16 minutes ago, derekcohen said:

The advantage of making your own is (1) you can choose your own wood, and (2) you can make them from rived wood, which is stronger.

Regards from Perth

Derek

I certainly agree that there are benefits of making your own. But it is a pain to do so. In my case, more trouble than it's worth. If a situation arrives that I need this thing, then I'll be glad I have it. Until then, not so much. 

I needed 16 - 1/2x4" pins for draw bore joints on my workbench. After spending too much time riving & trimming a piece of white oak for a couple of them, I said screw this & went to Lee Valley. I got white oak dowel that was dead on for diameter & pretty straight grained. There was maybe 25% waste where the grain wasn't straight, but it was still cheap, easy & fast.

But yes, sometimes you need dowels in other woods.

  • Author

Yes, i intend to use it for an eventual roubo build this year, as well as the occasional breadboard end...figured what the heck.

agree on the expediency of the shipping...i ordered tuesday morning and got them wednesday afternoon!  Maine and Connecticut aren't too far away but still darn impressive.

My dowel plate is holes drilled in the leg of a contractors table saw.  It works just fine, is easy to find, and ready to go.  It's a Powermatic 62 with solid cast iron top and wings, so it's a heavy piece. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.