Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Downsizing the shop #heresy

Featured Replies

I will be moving and downsizing the shop size!! I am going from a two car tandem to a one car tandem and need to rethink my tool choices. I have purchased a dust collector, bandsaw and several festool tools. I also "inherited" several older tools some hand tools and jointer, contractor table saw, shop made shaper, shop made router table. I enjoy my tools but need to consider downsizing. My contractor table saw has nearly no dust collection, riving knife/splitter or reliable angle readings. I already chewed up a decent portion of my thumb on a close call, not to mention a few instances of kickback that left some nasty bruises. Is it time to ditch the table saw? I do have a nice bandsaw (powermatic 14" with riser block) and a ts75 track saw. With the router table/shaper and ts75 tracks saw with mft3 table is there really a procedure that could not be tackled? I am considering more hand tool work as it is quieter with the kids. I just don't know about ditching the lathe. And due to that the dust collector. There is just so much to consider it causes some amount of anxiety and this is my relaxation. The challenge is real. #firstworldproblems

Sounds like the table saw should go but are you shore about the lathe?

Without a tablesaw to rip parts for doors what are you going to use the shaper for? TS75 is great for cutting larger boards and sheet goods,ripping strips for cabinet door frames  isn't going to work so well. You could rip on the bandsaw then joint & plane but neither machine was mentioned.

I do feel your pain, after 26 years in one location I was forced to move my small custom shop . I ended up having to downsize machines and materials. I advise you to label boxes very explicitly or it will be hell to find things in your new shop. Start cleaning up, packing and labeling and sell or dispose of as many things that you know aren't using much.

Good luck, your gonna need it !

Buy a cms for the festool 75 to drop into if room is super tight.

Benefit This should cover all your standard ripping requirements. The other consideration is to use a larger blade on the bandsaw and spend a bit of time tidying the cuts up with a plane or jointer. Definitely get rid of the contractor saw.  

I'd say get different table saw, the track saw is nice but i don't ever seeing it taking the place of my table saw.  If your lathe is a full size one, could sell it and get a midi or something, a lot less of a foot print.  Also if you have a shop made shaper and a router table, don't see why you'd need both of those since aren't they basically the same thing?

  • Author

The shop made shaper cannot utilize router bits. I do not show we can get that cms table here in the states. I like to turn bowls and segmented items so I want a decent sized lathe. 

- Good thing about the lathe is that it doesn't really require infeed/outfeed space.  So you need to just find an empty space for it along a wall and call it a day.  I'm not sure I'd want to put a lathe on casters.

- Many people get by with a bandsaw and no tablesaw.  I'd say it depends on what you make.  With the TS55, the utility of a contractor tablesaw is reduced IMO.  

- Router table and shaper - pick one.  do you really need a shaper?

- Hand tools would be great to fill in the gaps left by power tools you eliminate.

9 hours ago, tdh36185 said:

 I already chewed up a decent portion of my thumb on a close call, not to mention a few instances of kickback that left some nasty bruises. Is it time to ditch the table saw?

No offense but from the sounds of this I think if you keep your tablesaw you are going to have trouble again. The bandsaw is allot safer and as said doesn't take up much room..Good luck with what ever you decide..

everyone has their own opinion, but if I only had one power tool it would be a tablesaw with a router table dropped in the insert (i know that's cheating a bit but technically it would be the footprint of a single tool).

As far as your issues with a contractor saw, it sounds like you have something wrong with either your technique or the machine. I used a 1990s craftsman contractor saw for 10 years and once it was setup correctly it worked great (no kickback, no lost fingers).

Downsizing and shop....two words together are blasphemy!

 

That said, I went through it about a year ago.  Mine is slightly different, since it is temporary while we build a standalone shop, but the space constraint is the same whether you are selling off the unused or simply storing.  

Everyone has already said it.  Dump the contractor saw.  I would make my first priority a new cabinet style table saw, and build the new shop around it.  The hybrid saws really shine in this space, because they perform similar to the cabinet, but are on casters to keep the mobility.  Start thinking about your tools in terms of usefulness per square foot.  It sounds a little crazy, but I found the lathe was too much space, and too little usage, so it went on wheels and stores under a bench.  I can get it if need be, but embrace the idea that most tools won't be ready to use anymore.  They will need to be stacked and stored, and pulled out when needed.  

 

Buy stock in Home Depot and then load up on 4" heavy duty dual locking poly casters.  Make sure everything, and I do mean everything, ends up on wheels.  Even if you go 100% hand tools, you will run out of square footage to actually work/assemble any project of size (table etc.).  You are going to find you spend about half your shop time reorganizing and moving stuff, and the other half actually making sawdust.  4" seems to be the magic size if you have uneven surfaces outside your shop (Soil, gravel drive, etc.)  

 

 

I don't even keep my table saw at home. I do almost all my cuts with my bandsaw / SCMS / hand saws / jigsaw / circular saw.

My table saw is at my office and it gets used only when using the other saws would be extremely impractical.

I recently downsized from a two car (rented) garage to a one car (own) and its tricky but doable. 

As was already mentioned, invest in casters. Take anything bench top and build a flip top rolling cabinet for it. My bandsaw is freestanding but rolls into a corner, the sander and planer share one flip-top, while the miter saw and mortiser share the other.

You can fit a lot of stuff on adjustable gorilla-rack style shelves. All your hardware, jigs, hand and power tools. I even keep my small router table tucked away on a shelf. The rolling tools slide in next to them, and I can nearly clear the floor, except for an assembly table/workbench and the hybrid saw.

I'd say your old table saw is destined for craigslist if you aren't sure about it. Some people can do without, I don't think I could be one of them. If you buy another one, make sure its got casters built in, not something you really want to trust to an aftermarket base. I've had great luck with an r4512 I grabbed off CL for $150.

Some tools might even be slid under the wings of a table saw, like your jointer. You'll find you can get very creative with a small shop.

I read this thread last week and had one of those ah-ha moments.

I have a small 10x12 workshop area in the basement.   So I really really don't have much space.   I was really close to plopping down the cash for a Sawstop, but had held back as I really wasn't sure where I would put it,  but then I read this thread I started thinking.   Did I really need the table saw?   I started thinking about it, and I'm not sure I do...     I eventually wanted to get a bandsaw anyway, so I thought I'd just reverse my plans.

So tonight I bought a Laguna 14-12 bandsaw with the mobile base.

Anyway, thanks for giving me something to think about.

I have a small shop right now and have a router table in the wing of my tablesaw. It takes up some room, but I wouldn't part with it. Though it sounds like your saw doesn't like you. Maybe a new model like one of the fold up job site saws or something? 

  • 3 weeks later...
  • Author

I did get all the tools moved over. I have not sold anything yet. Power at the new shop is an issue. I only have three circuit spots available in the main electrical box. The current shop space has one useable outlet. I am thinking of doing a raised wood floor with outlets and maybe dust collector ducting. I am not set on the ducting in the floor as of yet. I will contact a friend that is an electrician about the ideal way to do the electrical it may be a sub panel. This would allow several circuits to be installed and I need at least one for the dust collector at 220v. Until the old house sells I will be sticking to organizing and hand tool work. Question on bench height, the height of the bench should be at your wrist standing comfortably. What if you have long arms for your height? Go a little higher? I feel it should be higher than it was as it caused some back aches in the past. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.