Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

His and Hers Wedding Gift (Mitred Boxes)

Featured Replies

  • Popular Post

Haven't made a box in a while, and a buddy of mine is getting married. All the boxes I've made in the past have been wild exotic woods with crazy figure. Though I'd take a page from the Matt Kenney design element and go subtle with the wood species and find beauty in the well-thought out subtlety.

Here's the 'her's box'. 2 cuts in total on the scroll saw for the top detail.

Cut thin veneer 'sandwiches from these veneers.

9c86e1ab47af3aeda0829fb98903a583.jpg

I picked the darker veneer in the middle to match the Spanish Cedar. Makes it seem more intricate than it actually is.....f58e6b77a858c1f7cc346c08541dc7e1.jpgd3b23f69106b16cff3777f2d33905a33.jpg

Mitres are tight btw...just isn't glued up in that photo.

Here's the 'his box'. First time I actually bothered to use the Fibonacci sequence in the dimensions. The measurements Really do look pleasing to the eye 94b20a2d8eb8ddd3ecec26c46caec748.jpg

Ok...so little figure....I had this Af Mahog finish test board lying around from an old project....it just so happens to be the perfect size for a lid! 2f1840e9fd1704759da08f058ca3308b.jpgb62d8e6e3825e3548da775363cf25741.jpg

More to follow. Busy as always.....p.s the whole house smells like Spanish Cedar!

5 hours ago, vinnyjojo said:

Haven't made a box in a while, and a buddy of mine is getting married. All the boxes I've made in the past have been wild exotic woods with crazy figure. Though I'd take a page from the Matt Kenney design element and go subtle with the wood species and find beauty in the well-thought out subtlety.

Here's the 'her's box'. 2 cuts in total on the scroll saw for the top detail.

Cut thin veneer 'sandwiches from these veneers.

9c86e1ab47af3aeda0829fb98903a583.jpg

I picked the darker veneer in the middle to match the Spanish Cedar. Makes it seem more intricate than it actually is.....f58e6b77a858c1f7cc346c08541dc7e1.jpgd3b23f69106b16cff3777f2d33905a33.jpg

Mitres are tight btw...just isn't glued up in that photo.

Here's the 'his box'. First time I actually bothered to use the Fibonacci sequence in the dimensions. The measurements Really do look pleasing to the eye 94b20a2d8eb8ddd3ecec26c46caec748.jpg

Ok...so little figure....I had this Af Mahog finish test board lying around from an old project....it just so happens to be the perfect size for a lid! 2f1840e9fd1704759da08f058ca3308b.jpgb62d8e6e3825e3548da775363cf25741.jpg

More to follow. Busy as always.....p.s the whole house smells like Spanish Cedar!

Well, at least your cigars will be happy!

  • Author

Slots cut for mitre keys on a carriage jig cba338642ae129d8f582e0127632216e.jpg

Some African mahogany scrap (to match the 'his' box lid) cut to a little over 1/8" thick for the keys 838e36899c6f2cb666461c1b3f2b3896.jpg

Keys glued in

bba9e866441c339e856c532f9d2df5bc.jpg

Flushed up on the disc sander and sanded smooth on the viced-up Festool half sheet sander

dfdc23a600dd1ef17006a427a6b5f00a.jpg

Great job on the miters!  Looking awesome!

  • Author

There are 2 cleats on the side wall. That's what gets set at 45 degrees. dc524637ee9e36fc81ce9f5bd297326d.jpg

Sent from my iPad using Tapatalk

  • Author

Time to saw off the lid from the enclosed box

e569bd7e631f8cdad26c6d24e1b9c2f7.jpg

Just a hair shy of a through-cut all the way around...and bust through with a marking knife 601d3928493fe6c058a9710c8d63ae76.jpg

ef4200968249e39ccf8ec835c8b5b906.jpg

e75ea6009339d1e70b51efe742896d48.jpg

Sent from my iPad using Tapatalk

  • Author
  • Popular Post

Chamfers added on the router table...

Cleaned up the reveal in the 'her's' box lid with my 1/4" chisel (which I never get to use) 9b1f71749266c84713dea6ed88390e6a.jpg

Gave it a thin coat of Watco Butcher Block to see if I had any glue marks or rough areas........left the inside sanded and unfinished to keep the Spanish Cedar aroma. efa1c774f258df09e3c84c4ff076ecf5.jpg

ae3ac503a6f63742c9d22cb500d91048.jpge30548926a51f609318189bd78772f83.jpg

  • 3 weeks later...
  • Author

4 50/50 thinned out coats of seal coat dewaxed shellac wiped on.

Finished the lid only with my old pal Menzerna.

8c4677c041e0b0747e7416e422c147e6.jpg

Gratuitous mirror shine photo

683ec86a5e282675b76152fe43bae699.jpg

And the rest...

cbeddec7b53e486477a56ed5baff1053.jpg

782f4a1e4069740bcadcc688eb1dcd8f.jpg

a9bbe83593fb7bf36e31427729c02f5c.jpg

  • Author
  • Popular Post

Magnets installed (always a nail biter).

Boxes finished

97c7e8d58627eea85b30eba7cfbfd008.jpg

f8c2b5d206a7526beb89217d9a42caf7.jpg

ccc725f53f3a51b3e1a7058877074228.jpg

Thanks for watching

Love the top on the Vinny!  Nice work as always!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.