Popular Post ..Kev Posted June 2, 2016 Popular Post Report Posted June 2, 2016 Since my shop is kind of down right now without decent DC, I decided to try my and at a cabriole leg. I'd never done one before and knew that the bulk of the shaping would be done by hand after it came off the bandsaw. If this were for an actual piece, I'd of spent quite a bit more time shaping and sanding but, this was just a time killer in the shop.. Glued up a couple pieces of scrap 8/4 and built a template to fit the block. Cut it out on the bandsaw Then about an hour with spoke shaves and rasps Some sanding and tossed a little finish on it just to see.. 8 Quote
Woodenskye Posted June 2, 2016 Report Posted June 2, 2016 Kev, for just messing around that's a heck of a nice leg! 1 Quote
mat60 Posted June 3, 2016 Report Posted June 3, 2016 5 minutes ago, Woodenskye said: Kev, for just messing around that's a heck of a nice leg! Ya..Looks nice.. Quote
Popular Post Coop Posted June 3, 2016 Popular Post Report Posted June 3, 2016 Not too shabby! I'm also impressed at how well it stands by itself! The fourth pic kind of looks like the leg on the leg lamp of Christmas Story?. 6 Quote
Popular Post Just Bob Posted June 3, 2016 Popular Post Report Posted June 3, 2016 It is hard to say "nice leg" to another man. But nice leg!. Please don't build a chest. 4 Quote
Janello Posted June 3, 2016 Report Posted June 3, 2016 Great use of down time. That might just pay off 10 fold down the road. 1 Quote
Popular Post Llama Posted June 3, 2016 Popular Post Report Posted June 3, 2016 Well, so much for feet up... You have a leg up on the competition! 3 Quote
Popular Post wtnhighlander Posted June 3, 2016 Popular Post Report Posted June 3, 2016 All you need now is a cheesy lamp shade! 3 Quote
treeslayer Posted June 3, 2016 Report Posted June 3, 2016 great work Kev, your first try looks better than my 10th ( if i ever tried one that is) i like downtime in the shop once in a while, gives me the opportunity to try new joint, techniques, ect. 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.