Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Planer Cart

Featured Replies

  • Popular Post

So, I actually finished this project before I headed back out on the road for work.  Thought I'd toss out a couple videos on the build but, also thought I'd show you guys the finished project..

 

And, here's the finished piece..

DEwZ6T.jpg

Still another video or 2 to go..

beautiful work Kev, that would look great inside anyones house and probably better that most have in their house come to think of it!

Ya.. You do nice work . Thanks again for another great the video Kev.

Another great piece for the shop, Kev ! Your going to have a pretty awesome shop full matching pieces of furniture. That's super cool. One day i will take the time to do that as well. Gotta get my dream shop before that though. Untill then I'll keep watching your videos and dreaming.

Sent from my SM-N910W8 using Tapatalk

That is very nice Kev.  But I wish you would stop using walnut on your shop furniture...it makes it very difficult for us normal people to share our genuine BORG ply shop creations.:D

  • Author

Thanks for the kind words guys..

21 minutes ago, Just Bob said:

That is very nice Kev.  But I wish you would stop using walnut on your shop furniture...it makes it very difficult for us normal people to share our genuine BORG ply shop creations.:D

Not much in this one..  The door panel was left over from the kitchen remodel and has been kicking around the shop for a while.

This is a nice project Kev.  The video came out well.  I have been thinking, not real hard though, about redoing my planer stand it has always seemed a little to narrow and top heavy.

This video actually popped up as a suggestion on my Youtube "home" page before I even found this thread, I think that means you are famous!

I think I'll actually build this one.  I've been loosely planning stands for a few benchtop tools, the Ridgid sander, the benchtop drill press and my planer.  I may as well make them all to match each other and your simple but craftsmanshipy design would look pretty dang good...I just may do all drawers for the sander and drill press carts.

  • Author
1 minute ago, bleedinblue said:

This video actually popped up as a suggestion on my Youtube "home" page before I even found this thread, I think that means you are famous!

I think I'll actually build this one.  I've been loosely planning stands for a few benchtop tools, the Ridgid sander, the benchtop drill press and my planer.  I may as well make them all to match each other and your simple but craftsmanshipy design would look pretty dang good...I just may do all drawers for the sander and drill press carts.

Thanks..  If you pm me your email addy, I'll send you the Sketchup file if you want it.

 

Looks good Kev!  A lot better than the old BBQ cart I used for mine.  Look forward to the rest of the build videos.

17 minutes ago, TIODS said:

Thanks..  If you pm me your email addy, I'll send you the Sketchup file if you want it.

 

Might as well, thanks!  PM incoming.

You know, I bought the DeWalt stand (actually, it was thrown in as well as the in/out tables) with my planer, and have been contemplating how to enclose it to look something close to what you have. Thus the reason for the pm about the pre-finished ply. Scrap that crap, send me the sketchup file too, if you will. As nice as that looks, when company shows, I can remove the planer and use it as a serving cart:D. Well done dude!

Stupid question... (which I am full of...)  On your sacrificial fence you have a type of clamp that looks perfect for that application, what kind of clamp is that that keeps out of the way on the business end?

Never mind a simple google search on sacrificial fence clamps and viola! found them right away!  

yes! been waiting to take a look at this build since you mentioned it 

Also, did you plan the slow look to the camera at the beginning? :) 

  • Author
4 hours ago, bushwacked said:

yes! been waiting to take a look at this build since you mentioned it 

Also, did you plan the slow look to the camera at the beginning? :) 

No..  Poop happens sometimes ;)

 

  • Author
2 hours ago, bushwacked said:

You need to stop working so hard and finish vid #2. emoji1.png

I'll try and get it uploaded tomorrow bud..  The internet in the hotel is painfully slow but, I'll start the upload before going to bed.

Nice work Kev. That reminds me I should make one like that too. I use my lunchbox planer only occasionally but it's good to have it available rather than on a shelf. My floorstanding combo jointer/planer is the workhorse but sometimes I need to use the lunchbox as the big one has got crap stacked on it (another horizontal surface ;) ).

  • Author
  • Popular Post

Only took about 8 hours to upload at the hotel..  Good thing I slept thru it all!

 

 

From that video looks like you really knocked that thing out quickly. Nice work!

  • Author
23 minutes ago, Isaac said:

From that video looks like you really knocked that thing out quickly. Nice work!

Thanks!  Couple days..

  • Author
5 minutes ago, Chet K said:

Another nice video Kev.

Completely of topic, maybe, I am curious as to what the blue hose on the reel up and to the right of your hand too wall is for.

Thanks Chet!  The hose hooks up to the DC system to give me some more reach into the lathe area.

  • 2 weeks later...
  • Author
  • Popular Post

Sorry for being slow..  Here's the last video..

 

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.