bleedinblue Posted February 22, 2017 Report Posted February 22, 2017 My wife and I own a condo that we rent out. Not by choice, we'd love to dump it, but the condo market in our area sucks and we can't sell it for what we owe. 'Nother story. In short, the condo has about 3-400 square feet of area (a small kitchen and two bathrooms, and the section in front of the front door) that currently has that cheap roll on linoleum flooring. After twelve years of use (and four or five sets of renters in five or six years) there is some damage to the linoleum and I may need to replace the flooring in these areas in short order. I'm looking for some options for easy flooring that I can put down in a day or two that also looks good and is durable. I've never laid tile before and I'm not really looking for this to be a learning experience. I know there are some new laminate options out there that are bathroom and kitchen appropriate, anyone have any experience with them? Are there other products on the market now that I should be looking at? Quote
JosephThomas Posted February 22, 2017 Report Posted February 22, 2017 Vinyl sheets are the easiest /most-affordable, and most resilient to crappy tenants that try to destroy everything. But they're not generally considered to "up the resale value." I think the slick together laminate is the only other quick/easy/affordable option, and it generally looks better than vinyl. Easier for tenants to destroy though. Quote
Gilgaron Posted February 22, 2017 Report Posted February 22, 2017 I don't have experience with it yet, but when I asked my friend who does floors and carpeting what he thought I should put down in my basement when I finish it, he told me the vinyl plank flooring was the best for anywhere you could get water. My sister-in-law beat us to finishing her basement and took his advice, and it looks great. It clicks together like the laminate, but won't be damaged by water. 1 Quote
prov163 Posted February 22, 2017 Report Posted February 22, 2017 The only problem with laminate flooring is that the veneer is so thin that renters will destroy it - it's an experience thing. Anyway, unless you are going to lay hardwood which will resist damage easier, I'm in the "roll down some more linoleum and call it a day" camp. BTW, I have a friend with several rental properties and he is in the same situation. We went to one of the houses a few weeks ago because the rent hadn't been paid and the morons had moved out in the middle of the night and ripped all the copper pipe and wire out of the walls. Friggin idiots. I got out of rental properties years ago and have never looked back. Good luck! Quote
bleedinblue Posted February 22, 2017 Author Report Posted February 22, 2017 We're meeting with an attorney tomorrow to try to figure out a way to get out of the place. When my wife bought it, way before I was around, she was suckered into a horrible variable rate loan. After a couple years, the interest rate skyrocketed to 7+%. We were ready to sacrifice her credit and let the bank have the property, but we found out today from our tax preparer that there may be significant tax considerations that may prevent that possibility. Assuming the lawyer doesn't have a magical answer, I will need to get this flooring down and get the place back on the market so we can find new renters asap. Quote
prov163 Posted February 22, 2017 Report Posted February 22, 2017 Another friend of mine just finally got fed up and did a short sale. He took out a loan for the difference between the two and said he'll have it paid off in two years or less and will still be better off than going in the hole every time he has to renovate after renters move. And he didn't take a hit on his credit except increasing his credit line. Good luck! Quote
wdwerker Posted February 23, 2017 Report Posted February 23, 2017 Laminate flooring is hell on saw blades ! 1 Quote
bleedinblue Posted February 23, 2017 Author Report Posted February 23, 2017 9 minutes ago, wdwerker said: Laminate flooring is hell on saw blades ! Oh I know. I found that out the hard way already. If I do a laminate, I'll use a cheap-ish blade and throw it away after. The vinyl planks seem like an interesting option that I'm going to research more. 1 Quote
wtnhighlander Posted February 23, 2017 Report Posted February 23, 2017 I'm working on a hobby building for my son's model RR habit. Pretty much decided the 'peel-N-stick' vinyl "planks" are going to be the best compromise between durability, cost, and easy DIY. Quote
RichardA Posted February 23, 2017 Report Posted February 23, 2017 1 hour ago, bleedinblue said: Oh I know. I found that out the hard way already. If I do a laminate, I'll use a cheap-ish blade and throw it away after. The vinyl planks seem like an interesting option that I'm going to research more. Lowes carries them, so does Lumber Liquidators. They are about 3/16" thick, and click together. Quote
Woodenskye Posted February 23, 2017 Report Posted February 23, 2017 1 hour ago, wdwerker said: Laminate flooring is hell on saw blades ! I used Bosch jig saw blades made for laminate flooring and they have been good. Quote
collinb Posted February 23, 2017 Report Posted February 23, 2017 Floating floors, whether vinyl or laminate, have improved significantly in the last 2 decades. The old Pergo from the 90s would warp over time even with normal humidity. (Ohio has plenty of that.) But the new vinyl flooring is nice to walk on. You can put it down like ceramic tile if you wish, even grout it. And you don't have to hire it done. Just be handy with baseboards and trim work. Quote
woodbutcher74 Posted February 23, 2017 Report Posted February 23, 2017 John Heisz just did a You Tube about using plywood strips for flooring. Looked a little labor intensive to me. The floor looked great when he was done though. Just an idea. Quote
drzaius Posted February 23, 2017 Report Posted February 23, 2017 1 hour ago, woodbutcher74 said: John Heisz just did a You Tube about using plywood strips for flooring Just because you can do something doesn't mean you should. Of all the flooring options out there, this is probably the most work & the least durable. Think about how thin the veneer is, & even if it is hardwood, the plies in the core are usually softwood. I generally don't like vinyl anything, but the vinyl plank flooring they make now is reasonably priced, very durable, easy to install, and it looks pretty darn good. Quote
bleedinblue Posted February 23, 2017 Author Report Posted February 23, 2017 We stopped by Lowes and looked at some of the vinyl plank options. It seems like a very good option. We'll likely go Monday and buy it so I can start installing Tuesday'ish. We had our meeting with the attorney and we're keeping the damn condo. Quote
Popular Post bleedinblue Posted February 28, 2017 Author Popular Post Report Posted February 28, 2017 We went with some vinyl planks with the "grip strip." It seems pretty nice and is real easy to put down. I laid the ~80 square foot kitchen today in just a couple hours. I'm taking off this Friday to do the remaining rooms. The new stuff is the grey floor in the pics. 3 Quote
Chud Posted March 1, 2017 Report Posted March 1, 2017 You could go for 'Luxury Vinyl Click Flooring' or Vinyl tiles - price can vary widely from about the same as you'd pay per square foot for tiles to quite a lot more...but they are much tougher than vinyl roll (also more expensive). Brand names to look at would be Karndean (Paleo Click), Amtico, Project Floors etc. The non-click versions of these have to be glued down in a very particular method and are not recommended for DIY installation...so cost quite a lot The thing to look for is the thickness of the wear layer as that will largely define how durable they are. Here in the UK I put down B&Q own brand vinyl click tiles down in our conservatory and I'm very happy - in fact these have a thicker wear layer than the Karndean equivalent. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.