Recommended Posts

Posted

Ok guys (and gals) I am looking to buy a new drum sander to replace my older Performax 16-32 machine.  Please give me your thoughts on which way to go.  Supermax 19-38 seems to be the best choice from what I have read but I figured I would check here before handing over my visa!  I will want the Infeed and outfeed tables, not sure if I want open or closed stand.  Does anyone sell the unit with the closed stand instead of the open stand?

Posted

The combo brush / drum sander comes on the closed base or you can buy it separately AFAIK.  A metal box with a small door in it isn't terribly useful to me.  I would save some dough and build your own base.  It will better serve your specific needs.

573fa1ec31b0a_Supermax19-38(16).jpg.3104cd71927fe3dc487b2c70f468e02f.jpg573fa1eb25b6d_Supermax19-38(15).jpg.3a14afd6836b71c128f773652b0a767f.jpg19-38-stand(25).jpg.d919a367adadcebc724a84b9407c4036.jpg

  • Like 1
Posted

I think you find most here pointing you in the direction of the SuperMax 19-38.  Like gee-dub said, build your own stand, way more useful.

Posted

I am pretty much sold on the Supermax, will not get the closed stand, will put the money towards wood for a nice cabinet some day.  Looks like $1399 and free shipping from Acme is the best bet for online purchase. Not sure if these machines ever go on sale.  Sold my Performax last weekend but I can wait for awhile before buying the Supermax, current project (Maloof rocker) does not have much need for a drum sander.

Posted
1 hour ago, Cheeset202 said:

I am pretty much sold on the Supermax, will not get the closed stand, will put the money towards wood for a nice cabinet some day.  Looks like $1399 and free shipping from Acme is the best bet for online purchase. Not sure if these machines ever go on sale.  Sold my Performax last weekend but I can wait for awhile before buying the Supermax, current project (Maloof rocker) does not have much need for a drum sander.

Unless you can wait a bit. Get on their mailing list and wait till they send out a 10-15% off coupon. They do it a couple times a year.

Posted

How do you like that 25-50 ? I saw that it has the same motor as the 19/38 . Does it have enough power to sand 25" or do you have to make very light passes ? I've been eyeing both sizes but I'm pretty fixed on Supermax.

Ive had a Peformax 16/32 for years, mine was made in the USA.

Posted

So far I have no complaints other than I had to wait two months for it to be available. The picture above is sanding hard maple and the two below are curly red oak that I resawed for panels In my daughters sheet music cabinet. Seems to have enough motor as I get impatient and over aggressive with the amount I am taking off. I guess I like it.

Resized_20170604_162712.jpeg

20170604_162434.jpg

  • Like 2
Posted
11 hours ago, Cheeset202 said:

It appears in your pics that the table is narrower than the drum?

On the current version (which that may be) there is a tongue that handles that area.

Posted
23 hours ago, B1rdhunter said:

The 25-50 takes the same space on the floor and the extra width sure is handy.

Thats annoying. I was thinking of going with the 19-38 to save space and I dont really need anything bigger, but knowing the 25-50 is the same footprint makes me not see the logic in not going with the larger one. Though the extra $500 makes it a bit harder to justify. I wish they would have made the footprint smaller on the 19-38 if they could have.

Posted
38 minutes ago, ben_r_ said:

I wish they would have made the footprint smaller on the 19-38 if they could have.

It is about as small as you can expect it to be.  You stick a 19 inch drum on the end of a motor and it is what it is, there is no getting away from it.  If you don't get the extension wings you can save some there.

The 25-50 really isn't the same foot print when you take into account the wings that stick out to support the wider work.

Posted
1 hour ago, Chet K said:

It is about as small as you can expect it to be.  You stick a 19 inch drum on the end of a motor and it is what it is, there is no getting away from it.  If you don't get the extension wings you can save some there.

The 25-50 really isn't the same foot print when you take into account the wings that stick out to support the wider work.

Looking at the specs on their website the sizes/footprints are exactly the same. They are exactly the same machine just with the 25-50 taking up the full table width by adding 6" to the drum length. You can tell even from looking at the images.

  • Like 1
Posted

I'm pretty sure the extended head and the little outboard support platform are the only differences between the two.  I personally have never exceeded the 38" capacity of the 19-38 (and probably won't until I replace my dining table)...but I guess if I had the extra space for the bigger unit (I don't...a few inches is a big deal in my shop) I would go ahead and spring for it.  Falls into the "why not?" category.

Of course the extra expense bumps you up into a new category of other sanders that now might make more sense if you're spending that kind of dough.  Part of the big appeal of the 19-38 is the very modest price.

  • Like 1
Posted
4 minutes ago, Eric. said:

little outboard support

This is the part that I was referencing.  Its no big deal, I understand that but it does "technically"  make the machine's foot print different.:)

Posted
2 hours ago, Chet K said:

It is about as small as you can expect it to be.  You stick a 19 inch drum on the end of a motor and it is what it is, there is no getting away from it.  If you don't get the extension wings you can save some there.

The 25-50 really isn't the same foot print when you take into account the wings that stick out to support the wider work.

 

22 minutes ago, Chet K said:

This is the part that I was referencing.  Its no big deal, I understand that but it does "technically"  make the machine's foot print different.:)

Wow I guess your right. Just measured mine and it sticks out 4 inches past the stand 3 feet above the floor. Thought the shop was getting crowded.:D

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   4 Members, 0 Anonymous, 50 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined