Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Walnut slab end tables

Featured Replies

  • Popular Post

Been working on these end tables for my wife for the past few weeks and finally got them finished, well enough for her liking.  Used my track saw to cut the miters, there was a ton of tension in the wood, was a pain in the asprin.  My ts75 bogged down and didn't want to cut through, made 3 cuts at 20mm each and it was still too much for my tracksaw.  After that pain, used my domino on the joints to strengthen them.  Finished them with arm-r-seal, of course something went wrong with my last coat, not sure what but I want to strip them and do it again but the wife said no she thought they were fine.  Glued on waste blocks near the miters to clamp the joint down, the glue stained the wood or something, sanded and card scraped the hell out of it but you can still tell if you look hard enough.  Needless to say, I cussed a lot during this build haha, but the wife is happy so it's all good.  I like how they came out overall but wanted them a little longer but didn't have a longer slab to work with.  I had better pics from my good camera but didn't feel like waiting to upload and resize them.

IMG_6136.thumb.JPG.9f0ef51fb751b0cba3c4e4766bb3b596.JPG

IMG_6119.thumb.JPG.26a96e118aa1a3e8c9372e77e70e8ed5.JPG

IMG_6139.thumb.JPG.121c75abc42e92b463c3bb5e599857ca.JPG

IMG_6116.thumb.JPG.b304423757b662e2c0786009867f2ce7.JPG

 

 

Nice job, Joe, they turned out great. Did you make your crosscut first and then cut your miter?

 

Sent from my SM-N910W8 using Tapatalk

 

 

That looks great Joe. 

I'm also interested in what was causing the saw to bog down. The only time I've seen that is when the stock wasn't flat before starting the cut.

Beautiful material, nice tight miters and clean butterfly Dutchman . . . simple, clean lines and a custom fit for their role . . . what's not to like?  Are the dark markings on the edges of the sapwood where the bark was removed?  I really like the satiny finish.

  • Author
13 minutes ago, shaneymack said:

Nice job, Joe, they turned out great. Did you make your crosscut first and then cut your miter?

 

Sent from my SM-N910W8 using Tapatalk

 

 

No, the first cuts both ways were too rough so had to clean them up after the initial cut but as you can see, making a cross cut first wouldn't have mattered.  Thought about sending in my ts because it sounded so underpowered, it's only 1.5" walnut.  

8 minutes ago, Brendon_t said:

That looks great Joe. 

I'm also interested in what was causing the saw to bog down. The only time I've seen that is when the stock wasn't flat before starting the cut.

Was pinching the blade. 

IMG_5842.thumb.JPG.36fba40ffdf493412814db06fad422e9.JPG

IMG_5804.thumb.JPG.d3249ed42767927b552c828fcfea94df.JPG

  • Author
2 minutes ago, gee-dub said:

Beautiful material, nice tight miters and clean butterfly Dutchman . . . simple, clean lines and a custom fit for their role . . . what's not to like?  Are the dark markings on the edges of the sapwood where the bark was removed?  I really like the satiny finish.

Yea it's from the bark, I was gonna sand it all off but it didn't want to come off, so I left it.  Not a fan of semi gloss or gloss, I satin everything except stuff I turn. 

i would check the toe in adjustment on your saw. At full plunge you should have .002" from the front teeth to the back. 

  • Author
4 minutes ago, shaneymack said:

i would check the toe in adjustment on your saw. At full plunge you should have .002" from the front teeth to the back. 

Did that and it was fine, I didn't like how much side to side play there is but saw nothing in the manual on how to adjust or tighten it.

Very nice.  The butterflied boards make it look like you used the full width of the tree, with matching sapwood ends.  Nice effect.

  • Author
8 minutes ago, Pondhockey said:

Very nice.  The butterflied boards make it look like you used the full width of the tree, with matching sapwood ends.  Nice effect.

It's a solid 17" wide slab, the butterflies were for the cracks.  Both tables came  from an 8.5' slab, wish is would have been a foot longer. 

I get bitching, moaning, whining, complaining...and burning...from my track saw too.  I even sent mine to Festool for them to re-calibrate and it came back exactly the same way.  Same story with the Kapex.  New blade, flat stock, doesn't matter.  It's a wuss.  I try to only use it for sheet goods like it was intended, but if I do use it on thick hardwood I'll always make a skim cut after the initial cut because the first one is never that great.  The 75 should have more balls than the 55 but it still doesn't surprise me.

  • Author
  • Popular Post

I was hoping the way I situated them my son wouldn't be able to climb on them since he's not walking yet but I was wrong.  They're a lot more stable than the last tables at least. 

IMG_6150.thumb.JPG.018827225df605deee42de158428a52e.JPG

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.