Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Side Table Build

Featured Replies

  • Popular Post

This journal will follow my build of a Kevin Rodel designed side table. Last month I picked up 126 bd ft of QSWO this is one of the projects that lumber was purchased for. 

First up I picked the board I would use, this one should do...

59a345fa4cd9a_SideTable1.JPG.a4324401889d9c08b807b155425ebbca.JPG

Next I laid out the parts with chalk

59a345fbcca2c_SideTable2.JPG.2e25c220e938dbd16e315425fc2a604c.JPG

Then I decided to make a quick resaw fence for my bandsaw

59a345fd46452_SideTable3.JPG.f013e0b48967c38baf83270cd18e819e.JPG

59a345fee06ca_SideTable4.JPG.69577b59f9b6afbaad577a9aaf87c6bd.JPG

Wanted it long so I had to cut access for a clamp

59a3460003196_SideTable5.JPG.4a34399aeca46e2771d1e841728db942.JPG

Next up check cut bottom to top for parallel 

59a346014bfb6_SideTable6.JPG.c0adcdea2369cfa9cf2754aa25e81e1f.JPG

Then I was able to break down the parts and resaw the pieces that needed it. Then sticker them for a couple days

59a34602ec43c_SideTable7.JPG.e3bb8623d4807cc1712688ed4c226a93.JPG

Next up was to cut the grid parts to size 

59a346046af6b_SideTable8.JPG.6cc64c6563ea7e38ed98298888ea12c2.JPG

Then I started laying out the dado locations. I love this paolini rule from woodpecker's

59a34605ad006_SideTable9.JPG.393cfe4fc909788dd6b3842b3c720a65.JPG

59a34606e391a_SideTable10.JPG.57981a0533c831129d09ac2c08054cd6.JPG

Next up I had to set up the dado stack on my Sawstop for the first time, out came the manual. Pretty painless

59a3460847619_SideTable11.JPG.4589bdb94523f56a48475dd41f602a0a.JPG

Then I cut a ZC insert for the dado head

59a34609645f6_SideTable12.JPG.2840b24c43f12e0604a6c2aaed0a181f.JPG

And then the grid dados

59a3460abe049_Sidetable13.JPG.24a9e3c7e1c0ca4cb237aecabeec4a24.JPG

Four grids complete

59a3460c517b2_SideTable14.JPG.74f20630aec4a14666312f11db9f6cfc.JPG

Next up glue up, clean up, and a couple of dado's. One spline for attaching them to the legs and another for attaching the top. Then onto the legs, compared to the bar stools I just finished this will be a pretty short and quick project :)

 

 

 

  • Replies 78
  • Views 20.5k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • This journal will follow my build of a Kevin Rodel designed side table. Last month I picked up 126 bd ft of QSWO this is one of the projects that lumber was purchased for.  First up I picked the

  • Exactly knowing how to use them helps, I'm getting better. Made some progress on the legs today After taking them to final dimension I laid out some spline mortises. I used a stop block

  • First up today was to cut the legs to length Next up mark for leg taper Next I made a quick taper jig as shown in FWW I also installed a make shift outfeed table so I did

Posted Images

  • Author
4 minutes ago, Chet said:

Looks like a cool project.  What  is your plan for the finish?  The pictures I have seen the table were ebonized.

Thanks Chet!! I am going to fume it, then use some garnet shellac, and finish with wiping satin wiping varnish, should turn out on the middle of the darkness scale. I will definitely be doing some test pieces since I plan to use the same process to do a future coffee table, Morris chair and ottoman, and a arts and crafts lamp. 

I am working on a WO piece right now that i was thinking about fuming, but in some of the stuff I read they talked about how it can come out inconsistent at times so I chickened out.  I am going to try a Jeff Jewitt recipe that duplicates the Stickley furniture's "Aurora" finish.

  • Author
5 minutes ago, Chet said:

I am working on a WO piece right now that i was thinking about fuming, but in some of the stuff I read they talked about how it can come out inconsistent at times so I chickened out.  I am going to try a Jeff Jewitt recipe that duplicates the Stickley furniture's "Aurora" finish.

Yeah I have read especially if you have boards from different trees in the same piece it can be a problem. I watch / read a fair amount of Mike Pekovich material over at FWW and I am going to follow his procedure and see how it goes. I'll have to check out Jeff Jewitt's process as well thanks for the heads up!

  • Author
  • Popular Post
On 8/27/2017 at 10:46 PM, Ronn W said:

Nice precise work.  I like it.

Thanks Ron!

I was able to get some more work done on the side table today

Got the grids glued up took a few clamps 

59ab74528f4e8_SideTable15.thumb.JPG.19c0cebbf6cc7ede7c4c214fd576eb37.JPG

Then I sent them through the drum sander to clean them up

59ab74704409b_SideTable17.JPG.f487a55a148bb94e66dc303fd84a47c9.JPG

59ab7471d1182_SideTable18.JPG.e036c0cd028707ab3d1772da96723cbc.JPG

After that I used a random orbit to remove the drum sander scratches.

Next up the legs.

 

Side Table 16.JPG

I like journals and this has started out being a good one. Continue on bud! Looking good! 

I always love your journals, Paul. Awesome works so far.

 

Sent from my SM-G950W using Tapatalk

 

 

Project is looking good !   I imagine cleaning up glue from that many inside corners was a chore. 

 That grid panel buried in clamps seems familiar. It still amazes me how what I thought was going to be a simple glue up keeps needing more clamps to close the gaps that pop up. Sometimes even if you do a dry run to see how many clamps you need it behaves differently with glue. 

  • Author
15 hours ago, K Cooper said:

I like journals and this has started out being a good one. Continue on bud! Looking good! 

Thanks Coop!

 

14 hours ago, Cheeset202 said:

Great start to the project, look forward to watching the build.

Thanks!!

 

7 hours ago, shaneymack said:

I always love your journals, Paul. Awesome works so far.

Thanks Shane!

1 hour ago, Chet said:

Wow Paul, thats more hand screw clamps then most store have on the shelf.

LOL yeah I have had 6 small and 6 medium for about 20 years and really just started using them more and more in the last couple of years. They worked great here because I could get two joints per clamp. I found out in the first glue up that every joint has to be clamped, as Steve stated things move with glue which you can see in the last pick where after removing the clamps I found gaps that needed closing.

1 hour ago, wdwerker said:

Project is looking good !   I imagine cleaning up glue from that many inside corners was a chore. 

 That grid panel buried in clamps seems familiar. It still amazes me how what I thought was going to be a simple glue up keeps needing more clamps to close the gaps that pop up. Sometimes even if you do a dry run to see how many clamps you need it behaves differently with glue. 

Thanks Steve! More so than i expected LOL. Like you said everything starts to slip with glue so each joint had to be clamped.

Titebond and LocWeld make a glue with an invisible dye in it that only shows up under a black light. When you have cleaned up all the squeeze out it's no longer visible. I got a LED flashlight, flip off the shop lights and it's real obvious what needs more cleanup.  I don't use it for most projects but if I was gluing up a grid like that it would be what I reached for. 

1 hour ago, pkinneb said:

LOL yeah I have had 6 small and 6 medium for about 20 years and really just started using them more and more in the last couple of years.

One of the long time standards that we tend to ignore.  Very handy for many things. Mine store in an otherwise useless corner.  Just a length of rope with a loop every so often.  After a while you can retrieve and replace them one-handed.

Hand Screws 001.jpg

  • Author
  • Popular Post
3 hours ago, gee-dub said:

One of the long time standards that we tend to ignore.  Very handy for many things. Mine store in an otherwise useless corner.  Just a length of rope with a loop every so often.  After a while you can retrieve and replace them one-handed.

Exactly knowing how to use them helps, I'm getting better.

Made some progress on the legs today

59ac9d89a23db_SideTable19.JPG.8b72b9a2ce2767011271b6f7ed413cb7.JPG

After taking them to final dimension I laid out some spline mortises. I used a stop block and a second leg to steady the router.

 

59ac9d8aeff98_SideTable20.JPG.506b30f7c081fc29fd87f29fafcdc100.JPG

Then I routed the mortises out

59ac9d8ca4dca_Sidetable21.JPG.9292111641bc281b3b95c7e456a09a0d.JPG

I squared them up with a couple hand tools

59ac9d99d74d8_Sidetbale26.JPG.e7920a917b7869fe182edae56662b8ff.JPG

59ac9d9675e03_Sidetable27.JPG.6e5b410dc8022b375e39c26661742e52.JPG

Then using the table saw with a stop block I cut the corresponding mortises on the lattice panels

59ac9d9002679_Sidetable23.JPG.4db4242878e59024c9facc6774a4983f.JPG

After cleaning those up and making up some splines it was time for a test fit

59ac9d9245b6a_Sidetable24.JPG.b07bff64fd116e8d5cb839df16d5c56b.JPG

59ac9d9498a9f_Sidetable25.JPG.7ad776680f04247774ee7fd6d3c10cc2.JPG

59ac9d9846d4b_SIdetable28.JPG.0ae83b548a67cdb6aa20630e6ec86287.JPG

Next up some tapers on the legs and I will be adding ebony cuffs at the bottoms of the legs then glue up.

Side table 22.JPG

I only have a couple of the parallel clamps and did not use them much.  FWW has a great article in a recent issue that shows the multiple uses for this style of clamp.  I might be investing in more of them!

  • Author
  • Popular Post

First up today was to cut the legs to length

59adcb012e45b_SideTable29.JPG.a8cadb8cc77ea8159b84edc3d1745480.JPG

Next up mark for leg taper

59adcb02960d7_SideTable30.JPG.6206dbf4bdd3e80f0f2e85ab8bb1331b.JPG

Next I made a quick taper jig as shown in FWW

59adcb0436fa1_SideTable31.JPG.9ed55357c2cb350c8e686a5eccbf68f1.JPG

I also installed a make shift outfeed table so I didn't drop a leg on the floor. I really need to build that soon...I miss my old one.

59adcb05c88d7_SideTable32.JPG.e5acd7994e6a98a0b0af4aecb6a3680f.JPG

Then I cut the first leg. I WOULD NOT DO THIS ON A SAW WITHOUT A RIVING KNIFE...and then only do what you are comfortable with. This was in the FWW article but at first I didn't like it. After thinking it through I realized the riving knife would keep the leg tight to the jig once it was pushed in far enough and in the end it was no issue for me.

59adcb075b238_Sidetable33.JPG.2b2ab4bee6a2dfad6b36b9789a918153.JPG

I decided to mark all 4 so I didn't inadvertently cut the wrong edge

59adcb08c8665_Sidetable34.JPG.a01070cc163b9592d38886f83f7a896c.JPG

Next up was to route for the ebony cuffs. First I used a scrap to make a fence, then I used another scrap to push the leg through the cut. Since the legs are tapered on two sides you have to make sure the leg bottom is square to your fence. I felt even with the taper the push block helped and also reduces tear out but since the cut is only 1/16" deep not a big concern there.

59adcb0a44e4a_Sidetable35.JPG.ab1e1270f519d578604b569fa3535b47.JPG

Next up was to cut some cuff material but first I think a new push stick is in order

59adcb0c53480_SIdetable37.JPG.a7f13c59ea16306f63e2f0326ef63557.JPG

Ebony strips, check

59adcb0da5a11_Sidetable38.JPG.2d6e5fe8a7ead6944ab88a4cc51a27c7.JPG

Time for some hand tools

59adcb0f57203_Sidetable39.JPG.61aa40bddff4fb2bdbc097058352549f.JPG

Gluing these was actually a bit fussy but another great opportunity for hand screw clamps because you have one tapered surface you can get great pressure on both sides.

59adcb10c085e_Sidetable40.JPG.7ef34262e75c194c6831720f51dd53b0.JPG 

First glue ups done after they dry I will cut the remaining cuffs to fit.

59adcb126f6ca_Sidetable41.JPG.fe3c41212f1a05928ee74b671e63f25c.JPG

Side table 36.JPG

So you meant to taper the outside of the legs ? Or am I looking at it the wrong way ?  I made that mistake once many years ago.

  • Author

Thanks guys!

31 minutes ago, wdwerker said:

So you meant to taper the outside of the legs ? Or am I looking at it the wrong way ?  I made that mistake once many years ago.

Correct. The outside two edges are tapered with tops being the tapered end. 

  • Author
2 minutes ago, wdwerker said:

Ah, so that Asian larger foot type appearance ?

Exactly. BTW that would really suck if I had done that wrong LOL

I ended up with end tables that looked bow legged. Didn't have enough material to do it over so that project never got finished.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.