Recommended Posts

Posted

really have a need for a palm router. (will be getting the plunge base kit for whatever one i pick)

Colt or DW611

after looking through the past threads, have settled on one of the 2 in the title of this thread.

they seem pretty comparable. not much difference in price to matter.

anybody have experience with both? is it a coin flip between them? pick whatever color you like?

do the LED lights in the Dewalt make a difference?

not a router expert by any means, so is there anything that would make a big difference between the 2?

will probably get an edge guide (in the future) for whatever i pick, i assume available for both.

not agonizing over this but a little more info wouldn't hurt. don't have a strong feeling either way.

thanks

Posted

 The Dewalt is a little beefier but, a little bulkier. The Colt is a little smaller and  a little more nimble. The Colt without the plunge base is nothing special. With the plunge base it is what it should have been originally. Don’t get  me wrong, I have three different bases and the plunge for my Colt. They all get used. 

Being the first "bragged up" router its size with some decent oomph comes at a cost.  The later released DeWalt has a light and a much nicer depth setting mechanism and most people seem to favor it.  If I hadn't been an early-adopter, I would probably have the DeWalt.

Posted

I have the dewalt, and I like it. No experience with the bosch, I considered it at the time just like you're doing now, and ultimately I went with the dewalt because it seemed so much easier to remove the base or make height adjustments. YMMV.

Posted

I have the Bosch I really like it, and I do want to get the plunge base for it.  I do have to say mine was a gift but it was selected by someone who had one. 

Posted

I've got 2 of the Dewalt 611, one Bosch colt and greatly prefer the Dewalt. Stronger motor and the lights do help. I have trimmed literally miles of plastic laminate with my Dewalt and it's still going strong. The clear base is a plus too. I've got big hands so the Dewalt isn't big to me, but the Bosch is a little lighter and smaller in diameter. The Bosch is a decent router and sometimes I've got it set up with a different bit, and both Dewalt's all in use in a rotation for special cuts. 

Posted

seems like i can't go wrong with either one.

thank you everyone for the input.

i think i will flip a coin!:lol:

(leaning towards the yellow fellow simply because there are more that have that, and that replied)

don't think i can go wrong with either, that is what is making it a difficult decision.

thanks again to all

Posted

DeWalt 611 seems to have become the new standard trim router. But that doesnt mean the smaller/older Colt doesnt have its place in the shop too. Just depends on what you want to do with them and how small/light youd like your trim router to be.

Posted

Good timing on this thread, I just bought a trim router an hr ago.  I picked up the Bosch, I liked how it fit in my hand better than the dewalt. Making height adjustments was easier on the dewalt, at least easier to make more precise adjustments. 

Posted

If I could only have one it would be the 611 hands down...but I really like the Bosch for a dedicated bit router. I have four of them all but one picked up on CL for under $50 and they are dedicated to different edge treatment bits. Somebody on this forum turned me onto the 611 kit its an awesome setup as an all around general purpose small router.

Posted

again, it seems like not much can be said bad about either tool.

i think i will be happy with the dewalt, but the bosch would be just as good.

just 2 good tools, and pick whatever small detail seems to tip the consensus in one direction or the other.

thanks again for all the input!

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 33 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined