Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Dog Bed Frame

Featured Replies

  • Popular Post

The follow up for the dog's chow station.  This is sized to fit on the hearth and set back against the screen.  Fireplaces in SoCal are the biggest waste of space :rolleyes:. It will extend out past the end of the hearth and I plan a small storage area for toys, leash and so forth in that area.  This is not shown in the drawing.

5a010d9bc6ac9_DogBedFrame.thumb.jpg.43a15e6ea02aeabae389663e00e6947d.jpg

This will be in the living room so it will be cherry to go with other items in that room.

5a010d94c8d03_DogBedFrame(0).jpg.e9a6dacdd9098dc4f5684f3952c04e1a.jpg

I break down some parts with  my cutoff tool of choice.  Mill a couple of boards to glue up for the back panel and joint the edges prior to gluing.

5a010d95565e8_DogBedFrame(1).jpg.dbedd914a07a1870b781428526bb2313.jpg

We see a lot of posts about how to get glue off of clamps.  I ponder gravity and mask off where the glue will end up.  Alas, despite my best efforts I too have had mishaps slime my clamps anyway.  But, I soldier on.

5a010d95d7655_DogBedFrame(2).jpg.b15c196cada37af8310b1e0f74a95849.jpg

5a010d966a0ab_DogBedFrame(3).jpg.b7c4bd921720bd6744f06cfcd796d6ca.jpg

While that's setting up I layout the two side panels.  I'm trying to get them both out of the same board so I scribble around till I am pretty sure I won't cut it too short.

5a010d970a989_DogBedFrame(4).jpg.0717f4b225af84b3f85e7bd745243790.jpg

There have been a few threads about jointing wide material lately.  I built this sled one Saturday morning years ago.  It's not super refined but, keeps on tickin'.  I don't have much material to spare so I am generous with the witness marks to help me keep track of what is coming off of where.

5a010d978ba58_DogBedFrame(5).jpg.3a633410db8d5e5c3cf08c369f7f071d.jpg

A couple of passes and I have a jointed face.  I set the sled aside and plane the opposite side to final thickness.

5a010d98027b5_DogBedFrame(7).jpg.df89442d3e6b1f6fd0dcea42711a6163.jpg

I have to mark out the curves and dimensions for the side; for real this time.

5a010d98629af_DogBedFrame(8).jpg.aacf5b3ce9205a14e494a1d19b562d2d.jpg

I rough cut it with the jig saw.

5a010d98e117c_DogBedFrame(9).jpg.b3ad5753d12b9fc5fa010f5a22929fce.jpg

Cut much closer at the bandsaw and use the spindle sander to shape it up to the line.

5a010d9946076_DogBedFrame(10).jpg.b12e25aedae870b927f815768ecdf2f2.jpg

I then use the final shaped piece as a template for the other one.  I then finish them both up with a shave.

5a010d9a2c1e5_DogBedFrame(12).jpg.b912a0d8d26d445a96796eba68254ad8.jpg

I take the glue-up out of the clamps, clean it up, fair a curve and cut it on the line at the bandsaw.

5a010d9aad929_DogBedFrame(13).jpg.b0189116dac8a9f6f957bf53a7ff3d0d.jpg

And here's the general idea . . . more to come.

5a010d9b3b067_DogBedFrame(14).jpg.8ba9af5818cda4082428ecf17b6a9420.jpg

Interesting I'm excited to see where this one ends up. With you doing the making it can only go some place good.

Now that’s one spoiled puppy! I guess I’m in the minority here about breaking down boards as I use my circ saw. What kind of blade do you use? 

That's one good way to get some use from a fireplace in the dessert !

I guess I'm spoiled, I use my sliding tablesaw to break down boards.

  • Author

Thanks guys. With the time change it wasn't as late as I thought so I got a little more done before knocking off.

There are a couple of voids on the back where they will never show . . . of course I have to fill them.  If nothing else, it's practice.  A tiny drop of black dye in some epoxy is more than enough for these two.

5a01211fccc4d_DogBedFrame(15).jpg.8f08e9a8705a4c164f88cfeece2a2c99.jpg

5a0121206bb8d_DogBedFrame(16).jpg.bc4765dd8a52993ca6e9c0bf8fb3a562.jpg

5a01212102a3e_DogBedFrame(17).jpg.d72a729827db5d693dfa19ee826967ff.jpg

I go ahead and mark out the curves for the front piece and cut them out on the bandsaw.

5a01212192116_DogBedFrame(18).jpg.9077d73c46a5a8cb1b627c805f07aba9.jpg

5a0121222e46a_DogBedFrame(19).jpg.39a74a0ebec9e843aae01d5b488e79c3.jpg

That outta do it for now . . . 

  • Author
56 minutes ago, K Cooper said:

Now that’s one spoiled puppy! I guess I’m in the minority here about breaking down boards as I use my circ saw. What kind of blade do you use? 

Yes she is.  I use a circ saw for thinner stock and sheet goods.  I use a Bosch T101BF in the jig saw for things up to about 6/4.  Takes up a lot less room than a CMS.  I've got a longer blade for thicker stock.  The Bosch cuts like 'buttah' with the right blade for the task.

Very nice, looks like good cherry stock to start with.

I really want to move away from so-cal just so I can have a fireplace and actually use it ;) I do like using it for those 3 weeks out of the year though.

Man i live in the frigid north and we don't have a fire place. I wish i had one but this house didnn't come with one and i don't ever want to move again.

I feel like there has been a lot of hate on CMSs lately. I mean i agree with the points but it seems all of a sudden.

  • Author
5 minutes ago, Chestnut said:

I feel like there has been a lot of hate on CMSs lately. I mean i agree with the points but it seems all of a sudden.

Sorry, I didn't mean to contribute to any hate-fest :).  I have a CMS out in the shed.  When I need to cut long thin stock I roll it out and use it.  If I did a lot of that sort of thing I would definitely make room for one in my shop.  I only use one every few years so mine is relegated to the shed but, you notice I still have one ;).

4 minutes ago, gee-dub said:

Sorry, I didn't mean to contribute to any hate-fest :).  I have a CMS out in the shed.  When I need to cut long thin stock I roll it out and use it.  If I did a lot of that sort of thing I would definitely make room for one in my shop.  I only use one every few years so mine is relegated to the shed but, you notice I still have one ;).

I didn't mean to accuse you of that sorry. It just kinda surprised me that some people loved them and then all of a sudden the tides turned. I do too many construction type projects to not have one. Beings that i had space and it worked I got it calibrated to be accurate. The thing is a terrible dust mess though and that is annoying. Sorry now i feel like i sullied your wonderful build with some negativity.

  • Author

 No problem  :). Side conversations add value to the thread.

1 hour ago, Chet said:

gee, how do you go about shimming your work on the planer sled?  I don't see anything in place in the photos.

Looks like there are wedges on each end of the perpendicular boards that he adjusts to reduce rocking. I'd be interested in more detail.

Untitled.thumb.jpg.ccdb53440d4b00e8afd70ccf9c52bb50.jpg

2 hours ago, Chet said:

gee, how do you go about shimming your work on the planer sled?  I don't see anything in place in the photos.

it is a shop notes sled ... 

 

planer-sled-drawing.jpg

  • Author
3 hours ago, bushwacked said:

it is a shop notes sled ... 

ShopNotes has a much more elegant solution:

5938206785edc_planersledcovershot.JPG.163a068ffc24e6a522e78b883c4e4b82.JPG

Mine is from a Keith Rust article in Fine Woodworking.  If the ShopNotes version had been around back when I made one, I would have made theirs . . . Of course that's easy to say now ;-)  The Keith Rust version can be made in a few hours though.  I used stair tread anti-slip for the cleats and the wedges and it's still working. Mine is 60” long.

  • Author
  • Popular Post

Thanks all.  I've had a long couple of days and finally got a little free shop time to give this some attention.  There was a thread on this subject; do you move the fence back to make stepped cuts to full depth or raise the bit.  The consensus was that either works and one may be required over the other depending on profile.  This is just a rabbet and I have a lift so I cut full width and step up to full depth.

5a0509920ed3f_DogBedFrame(20).jpg.8c522a8235d539bafa3363af77c2ad2b.jpg

Interestingly for this joinery the dimension of the remainder is the key measurement.  I want an 1/8" left.

5a050992b3532_DogBedFrame(21).jpg.bdb3659976eb305dc3efc3038eacb0fc.jpg

Same goes for the rear of the sides.

5a0509936639e_DogBedFrame(22).jpg.ebb2b8e38d3ba38075a01b81c6dff2bc.jpg

This is the joint I am after.  The idea is that a chamfer or roundover will reduce the obviousness of the joint.

5a050993e270d_DogBedFrame(23).jpg.e6156fac9a7fb97fff7eba9177358e63.jpg

And I'm here but,

5a050994a36ef_DogBedFrame(24).jpg.e027a7549943fddc80381f6800422386.jpg

its time to stop for tonight.  I need to add the frame that will hold the slats and then I will be in the home stretch.

 

  • 2 weeks later...
  • Author
  • Popular Post

Finally got back to add the near-done step here.

5a162667a8076_DogBedFrame(25).jpg.2cefc25cc5e43a5a073131dbd646c8d9.jpg

5a1626686333d_DogBedFrame(26).jpg.126e8f895107fe49ea0996eee96c44df.jpg

The camera flash makes things look a little blotchy.  Once the drawer unit is under the front and its in the house I'll take a couple more pics and call it done ;-)

 

  • 4 weeks later...
  • Author
  • Popular Post

Ooops!  I never closed the loop on this.  Here's the completed unit.

5a35a0aca5fc0_DogBedFrame(32).jpg.859aeb2be0f695787395bb225b8e99a8.jpg

A generous drawer on each side for dog stuff.

5a35a0ae49bfe_DogBedFrame(33).jpg.1e1615407d230c7c745153334c2979e3.jpg

And where would you be without dog-bone drawer-pulls?

5a35a0afe18aa_DogBedFrame(34).jpg.f6cf169637f5d3aed120baef546a31d1.jpg

No extra charge for the dog hair.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.