Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Live edge shelf

Featured Replies

After 5 years of living in this house, my wife finally picked out some sconces. We wanted to minimize seeing the cords, but not have to hardwire them. So I came up with a solution that included a live edge shelf made from material that was left over from my kitchen counter-tops.

First I resawed and glued together a 2.5" thick piece of walnut with some tiger striping. Took me a long time to decide what to use this for. Originally I wanted to make a bench but it was just too thin. The glue up was pretty good but a bit misaligned, so I had to clean it up.

1.thumb.jpg.92537b0eccaa40561e135b7af2d683d7.jpg

No matter what I do, I can't get rid of the damn tracks on my LAJ. Honestly this time I think I had the blade too far out. Because I did the cambering with the LV jig. But luckily my favorite tool was available to do the cleanup. Scraped down the entire thing to get it cleaned up.

3.thumb.jpg.5deb6902f2d3bb49d618e6656cd714f7.jpg

Squared and trimmed up the ends.

6.thumb.jpg.743ef72849e83552011ceb60987df13c.jpg

 

This is the live edge before epoxy. 

5.thumb.jpg.2a362d1dba09fdadaa5948ce70609af5.jpg

After putting epoxy on the shelf, I tested different places to put the shelf. I decided it looked stupid in the center, like shown below. So I ended up going with 2 inches from the bottom. 


7.thumb.jpg.3590d570465e99ddda271434794ece6a.jpg

 

 

 

  • Author

I made the mortise for the shelf to sit in. Definitely my best work yet in terms of getting things sized correctly.

8.thumb.jpg.a1a846f8195eb4d69c2ba733490e77d6.jpg

9.thumb.jpg.1589fbc880383b334df33e2d1bed7951.jpg

I still ended up with some small gaps. But I plan to use walnut wood filler on them. Honestly since live edge is sorta.. rustic in nature, I think it wouldn't hurt to ignore the gaps but it bothers me. 

Some pics of gaps-

10.thumb.jpg.d3667da8b54fdf485277ccb399bd3336.jpg

12.thumb.jpg.ac0f34d93b334cf16387e34a80de0a73.jpg

13.thumb.jpg.244b9a960f225a774e5f119e201f6441.jpg

And a test fit

11.thumb.jpg.6ef195dc761da0a40d01a6512fa2630a.jpg

 

  • Author

The sconces were centered on either side of the shelf. I drilled a hole for the cord to go through, and then made little blocks with a curve that almost (but not quite!) matched the curve of the sconce. That way you won't be able to see the cords at all. Um, I sorta forgot to take pictures of that. I also forgot to take pictures of the french cleat and "stabilizing block" on the back that will help it sit on the wall. In my defense, I was watching Halt and Catch Fire on the laptop and hadn't intended to journal this anyway. :)

15.thumb.jpg.cd173f9258fc1ef7ef20964ce96b61f2.jpg

Today, I glued the shelf in. I'll add some 4" spax screws to the back that I've already pre-drilled for. It went in decently square, maybe 1/32nd out. I knew that would happen based on the test fit, so I had clamps standing by. You can also see my blocks that will cover the cords here - I find it difficult to match a curve, hopefully will get better at that. Tomorrow I can do my final sanding touchups (already sanded to 220 but I've scuffed some things) and get the first coat of ARS on.

22.thumb.jpg.a7e76ffdde9ad341e57564cac13f73f0.jpg

23.thumb.jpg.e5e6f41b97821124f75cbb10928352f2.jpg

Only another woodworker might ever notice those tiny gaps. I guess it's just in our nature, I would have filled them too !

 

Its funny how something a small as the gaps can bug the crap out of us when most would never notice.   Still very nice work Cliff.  

If you cut a shoulder on the shelf, that wouldn't happen...

 

  • Author
43 minutes ago, Llama said:

If you cut a shoulder on the shelf, that wouldn't happen...

 

True. I didn't think of that. 

Looking good Cliff. I like your clamp configuration!

  • 2 weeks later...
  • Author

Third coat of finish is on in this pic. It's looking pretty good, but I can see a couple of spots where I didn't sand well enough. I gotta learn to slow it down triple check because I get so eager to get the project done.

Obviously my next project is cleaning. :)

20171116_171122.thumb.jpg.fa810326dc3f7c5c7e593b7447a232f2.jpg

20171116_171131.thumb.jpg.b17c2ceebb04099f0124248a9f481c81.jpg

20171116_171141.thumb.jpg.dd5d62ae0424cd3669541fffff0b324c.jpg

The shelf

20171116_171152.thumb.jpg.c46ad18ca0e5679552627d3e05d39eb4.jpg

20171116_171203.thumb.jpg.624bcfd59e41bcac1f3b81915588185e.jpg

Plasticy but not as bad as I thought it would be. My bedroom will never have super bright fluorescent lighting, and no one will ever get this close to it.

20171116_171209.thumb.jpg.c9540f219863677e622ab5870f040d57.jpg

And finally.. the biggest gap by far.. with the wood filler. I can see it like it's a supernova against a dark sky, but hoping nobody else will. I also think this picture was after sanding on the third coat, before 4th coat.

20171116_171323.thumb.jpg.bdb0491aadc585b62796754091086382.jpg

 

We’re always critical of ourselves. But we should always strive to do our best work. That’s a beautiful piece. Are there two sconces?  

  • Author
1 hour ago, prov163 said:

We’re always critical of ourselves. But we should always strive to do our best work. That’s a beautiful piece. Are there two sconces?  

Yup. Next picture will be it up on the wall with the sconces. I'm waiting 7 days on the finish then a final polish before install. 

  • Author
  • Popular Post

I still need to make some cord covers, since I placed it higher than I had intended and my wife hates seeing cords. But it's done!

20171126_154804.thumb.jpg.ced551d9516bfb379c374c693ad7b4d8.jpg

 

20171126_154811.thumb.jpg.5a688861b40b666e9a05b124d15ff216.jpg

oh that looks great! I had a hard time figuring out what it would look like on a wall, but that is nice!! 

Is anything actually going on the shelf?

I could see a nice clock or a vase for flowers, I'd have a hard time covering up the nice looking wood though.

I like it Cliff good work!

Wiremold makes some channel that, when painted the wall color, is very unobtrusive. Home Depot carries them

  • Author
10 minutes ago, drzaius said:

Wiremold makes some channel that, when painted the wall color, is very unobtrusive. Home Depot carries them

Thanks, I'll check that out. Might be better than making a walnut one. 

Just now, Cliff said:

Thanks, I'll check that out. Might be better than making a walnut one. 

Ya, I think one made of walnut would draw attention to itself.

That came out great Cliff.    Bet your wife is happy.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.