Recommended Posts

Posted

I"ve done some copper plumbing.  This was a shower in the rental house converted from a 1974 green fiberglass shower.  The right valve goes to a large overhead rain showerhead.  It was cheaper to put in two valves than one of the diverters.  The old shower head was in the opposite wall.  This is before it was tied into the lines going to the washer, but I don't have any more pictures.

image.thumb.jpeg.873b3003514854b56918484a1f4515d3.jpeg

  • Like 2
Posted
On 8/16/2025 at 7:35 AM, Von said:

My first thought as well, but not really. Hard to tell from the photo, but the two legs are different length so it would mean that side of the picture frame would be recessed compared to the other three. Also, the glue joint would be visible on the side instead of hidden in the back. (This is a picture frame for a canvas print BTW - Marc's video.)

Good news is the wife likes how it look enough to want a second, so I'll mill stock for a replacement piece along with the stock for a second, which won't feel quite so... inefficient.

Gotcha. I figured there had to be more going on than i could see, but couldn't quite see the issue. 

  • Like 1
Posted

I hit a question I wrestle with yesterday - to plane or to resaw? I'm curious for feedback on my decision making. Resawing has only entered my skill set in the last year and my thinking about this has really developed in a vacuum, so I may be missing things.

Case in point: I need a 1/2" board. After getting my rough board flat and smooth enough I feel I could resaw it, I pause my planing and measure. In this case, it was just over 3/4".

This is a borderline situation for me. I probably could get a piece of ~3/16"  instead of a bunch of planer shavings. But this is run-of-the-mill cherry and nothing fancy, so I decided it wasn't worth setting up and resawing, and I finished planing it down. If the board had been thicker, such that I could have gotten a solid 1/4", or something where I felt the resulting veneer would be more likely to be useful, I probably would have resawn as long as I could have gotten anything usable.

Any factors folks think I'm missing or flaws they see in my thinking? TIA

PXL_20250816_142950097.thumb.jpg.e28015c27dda7575b48a85607d6e1cd6.jpg

  • Like 2
Posted

+1 to @Mark J above. 

I'll only resaw if i have a lot of thickness to remove, and even then I'll resaw to above my final thickness and plane it the rest of the way.  (Or to make a veneer, which is mostly why I resaw)

If I take a thick piece and make it a thin piece, the internal stresses that get released and the differences in moisture will make my now-thin piece twist and cup. So i try to buy stock that's close to my finished thickness so I'm not removing a lot of material. 

  • Like 2
Posted
On 8/25/2025 at 8:59 PM, Tom King said:

 I wish I knew something about using cad but I'm well past having any time to fill on something new.

I hear you. I would really like to learn SketchUp, but i don't even own a computer. 

  • Like 1
  • Confused 1
Posted
On 8/26/2025 at 9:09 AM, Ron Swanson Jr. said:

...but i don't even own a computer. 

I'm glad to hear there are still folks such as yourself.

FYI, with the 3-D printing, I started with a basic understanding of SketchUp and theoretical understanding of how 3-D printing works (layers from the bottom up) and I estimate it took me about two hours to measure and design the button. A lot of that was futzing to get the 1/32" precision on the interior hole.

  • Like 2
Posted
On 8/25/2025 at 6:15 PM, Von said:

Had my first, and very positive, experience with 3-D printing courtesy of my local library. 

What was the process at the library?  Did you hand someone a thumb drive and wait for them to hand you the parts?  Did you make a reservation in advance?  

  • Like 1
Posted

Our library has restrictions on what you print. I don't recall the extent of it but things like weapons would be a no go. I believe we're restricted to printing something only once a week I think.

Some printers have multiple filament capabilities so you could print those buttons in yellow but have high/low/off printed in black. That tends to add significant time unless you're able to make the second color above the first. If not, it changes the colors for each layer.

  • Like 2
Posted
On 8/28/2025 at 8:51 AM, legenddc said:

When I went to replace my miter saw blade this weekend the torx/flat head bolt stripped.

If I understand correctly, the inside of the head stripped such that your key was slipping?

That is unusual in my experience and I agree was probably a manufacturing defect or the installation was incredibly over-torqued.

  • Like 2
Posted
On 8/28/2025 at 8:55 AM, Von said:

If I understand correctly, the inside of the head stripped such that your key was slipping?

That is unusual in my experience and I agree was probably a manufacturing defect or the installation was incredibly over-torqued.

Yes, that's exactly what happened. It almost seemed like the head wasn't hard enough. The Knipex pliers loosened it so easily that I don't think it was over-torqued from the factory.

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 65 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined