Tpt life Posted October 11, 2025 Report Posted October 11, 2025 If I can mow my yard, not hear my mower, and not feel discomfort, I am not thinking the claims are anything more than not submitting to the governing test authority. In that way, plenty of non-UL listed electrical devices last for 50 years without shocking anyone. That just means that device was never submitted for UL testing. Quote
Mark J Posted October 11, 2025 Report Posted October 11, 2025 @wtnhighlander, This is my understanding as well. I use a set of Bose. I would just use earmuffs, but they won't fit with my PAPR. Noise cancelling devices have to first sense the sound, then generate the reverse phase, canceling sound. So it takes an instant. So I wonder if they are the best choice for shooting? @legenddc, think of it as a birthday present all over again. Quote
legenddc Posted October 11, 2025 Report Posted October 11, 2025 Here’s the data sheet for the Apple headphones. It says not to use it for guns or jackhammers. 1 Quote
Tpt life Posted October 11, 2025 Report Posted October 11, 2025 Uh, kind of. As sound is my full time job, I see the device as equaling any of the three fin inserts that had mixed impact in real world application, depending on the nature of the material used, and the actual air seal it provided. (Poor military guys that got lied to...)This document makes a good case that in noise cancellation mode, they can be effective. The other modes fail quite quickly for sharp reports. That is a 1:3 success mode, and requires an understanding that could make them effective. I am not an Apple fan boy, but I have serious skin in this game, if I get to retirement with enough hearing to stay in my field. I don’t like black and white evaluations that ignore that data on the page. Quote
wtnhighlander Posted October 11, 2025 Report Posted October 11, 2025 The devices I've seen made specifically for shooting are over-the-ear types, which offer some level of sound reduction, even when the nouse cancelling feature is inactive. The attraction for shooters is that you can easily converse while wearing them, but the level of sound reduction increases when the firing begins. I have tried them, and there is a very brief delay when a sudden increase of sound occurs, before it is cancelled. According to US government standards, the average sound pressure over time is what must be limited to certain levels to meet safety requirements, so the brief spike is allowable. Quote
Beechwood Chip Posted October 11, 2025 Report Posted October 11, 2025 I've been pretty happy with my ISOtunes Link Aware and Pro Aware. They block noise, but have an external microphone and an internal speaker, so you can hear what's going on "outside'. The speakers cut off at 80 db. It's a little weird when I put a hammer down on a table and there's a click as they cut off the peak. They also do Bluetooth, and I can adjust the Bluetooth volume and "ambient" volume separately. A friend who's an auto mechanic admired mine and got a pair for work. 1 Quote
Beechwood Chip Posted October 11, 2025 Report Posted October 11, 2025 On 10/11/2025 at 10:11 AM, Mark J said: Noise cancelling devices have to first sense the sound, then generate the reverse phase, canceling sound. So it takes an instant. So I wonder if they are the best choice for shooting? ISTR that they were originally intended for continuous noise levels, like in an airplane. 1 Quote
Popular Post Ron Swanson Jr. Posted October 11, 2025 Popular Post Report Posted October 11, 2025 Minnesota Woodworkers Guild Expo today. Made a killing at the tool swap, saw lots of familiar faces and made a few new friends. A great time!! 6 Quote
Tpt life Posted October 11, 2025 Report Posted October 11, 2025 I have some ISOTunes, and hate the sound quality for listening to music. 1 Quote
Popular Post Dave H Posted October 11, 2025 Popular Post Report Posted October 11, 2025 On 10/11/2025 at 7:27 AM, legenddc said: Here’s the data sheet for the Apple headphones. It says not to use it for guns or jackhammers. So...if your going to shoot the guy operating the jackhammer outside of your house, don't wear the Apple headphones? 3 Quote
Coop Posted October 11, 2025 Report Posted October 11, 2025 On 10/11/2025 at 2:00 PM, Dave H said: So...if your going to shoot the guy operating the jackhammer outside of your house, don't wear the Apple headphones? Correct. Cause you’ll never see them again when the cops take them off your head! 1 Quote
Popular Post wtnhighlander Posted October 11, 2025 Popular Post Report Posted October 11, 2025 2 hours ago, Tpt life said: I have some ISOTunes, and hate the sound quality for listening to music. I suppose that is the curse of being a music professional. Personally, I can't tell much difference in any set of head- or ear-worn devices I've ever used. External speakers are a different story, but I still can't differentiate between them nearly as much as someone who deals with music & sound for a living. 3 Quote
Beechwood Chip Posted October 11, 2025 Report Posted October 11, 2025 On 10/11/2025 at 1:28 PM, Tpt life said: I have some ISOTunes, and hate the sound quality for listening to music. I agree, that's not their strong point. Quote
Popular Post gee-dub Posted October 12, 2025 Popular Post Report Posted October 12, 2025 Not near enough in the shop but, I caught the grandkid's football game so, good enough for me. 6 Quote
Mark J Posted October 12, 2025 Report Posted October 12, 2025 21 hours ago, Tpt life said: As sound is my full time job, Speaking of which, how's the new job? 2 Quote
Popular Post Tpt life Posted October 12, 2025 Popular Post Report Posted October 12, 2025 On 10/12/2025 at 8:58 AM, Mark J said: Speaking of which, how's the new job? So much better atmosphere than the school I left. I hate to compare, but there is peace here I was missing there. 5 Quote
wtnhighlander Posted October 13, 2025 Report Posted October 13, 2025 5 hours ago, Tpt life said: So much better atmosphere than the school I left. I hate to compare, but there is peace here I was missing there. That counts for a LOT! Glad to hear is is going well. 2 Quote
Popular Post Immortan D Posted October 13, 2025 Popular Post Report Posted October 13, 2025 My daughter replaced the existing AC unit with a new one in her house and something has to be done: I couldn't find that exact profile so I had to make it from scratch: 3 Quote
Mark J Posted October 13, 2025 Report Posted October 13, 2025 14 hours ago, Tpt life said: So much better atmosphere than the school I left. I hate to compare, but there is peace here I was missing That's great! Quote
Popular Post Von Posted October 14, 2025 Popular Post Report Posted October 14, 2025 Vacation and then covid and then some business has kept me out of the shop until late last week. This coming week I agreed to join a friend demonstrating Matchfit jigs to the local woodworkers club. I thought I'd the the opportunity to remake a couple jigs in hardwood (white oak, maple). I think my Matchfit relief bit was a little dull and I ended up breaking the carbide off it. This motivated me to try the table saw and dado blade to do the relief cuts. I think I'm sold on this method, my table saw at least has a lot more umph that my routers. I also quickly, but not quickly enough, remembered to do all the cross-grain cuts first to manage tear out. Small 1/4"x1/4" inserts to the rescue but what a PITA. I also made some setup gauges while I was at it. These were handy for router set up. The new version of my Jay Bates "Moxen Block" before final sanding. The keen-eyed will note one more lesson learned, which was cross-cutting at the router table will indeed pull ones work towards the fence in a subtle enough way that I don't notice it until too late. 6 Quote
Popular Post Coop Posted October 14, 2025 Popular Post Report Posted October 14, 2025 Eye for one, didn’t notice! 3 Quote
Popular Post Tom King Posted October 14, 2025 Popular Post Report Posted October 14, 2025 I know somewhere back in this thread there were discussions about tomatoes. We just don't have time for a garden any more, but were blessed with this volunteer right next to the chicken pen. They keep it eaten back on the inside but I think it's benefiting from all the compost in the pen. I normally don't like little tomatoes, but these taste just like good big ones. October 14th and we're still eating them off this vine. It's about 8 feet tall and always loaded. We've been eating the great little tomatoes off of it since the end of June. Pam has cut it back a number of times so she can get in the hen house (door in the corner behind the plant) and the pen door but it keeps growing like crazy. Tomatoes in view right near the pen door hinges. 4 Quote
Coop Posted October 14, 2025 Report Posted October 14, 2025 That’s one big ole cherry tomato plant! And still getting new blooms. 1 Quote
drzaius Posted October 14, 2025 Report Posted October 14, 2025 We got our first frost about a week ago, so I picked a 5 G bucket full of green tomatoes and half a bucket of red ones. We've had so many tomatoes this summer. 1 Quote
Popular Post Coop Posted October 14, 2025 Popular Post Report Posted October 14, 2025 On 10/14/2025 at 12:48 PM, drzaius said: We got our first frost about a week ago, so I picked a 5 G bucket full of green tomatoes and half a bucket of red ones. We've had so many tomatoes this summer. When that time of year gets here, I take and put the green tomatoes in short, cutoff cardboard boxes from Kroger, cover them with a couple of sheets of newspaper and store them under a bed. They ripen nicely there. Or slice and fry them. 3 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.