Ron Swanson Jr. Posted October 15, 2025 Report Posted October 15, 2025 On 10/13/2025 at 9:02 PM, Von said: Vacation and then covid and then some business has kept me out of the shop until late last week. This coming week I agreed to join a friend demonstrating Matchfit jigs to the local woodworkers club. I thought I'd the the opportunity to remake a couple jigs in hardwood (white oak, maple). I think my Matchfit relief bit was a little dull and I ended up breaking the carbide off it. This motivated me to try the table saw and dado blade to do the relief cuts. I think I'm sold on this method, my table saw at least has a lot more umph that my routers. I also quickly, but not quickly enough, remembered to do all the cross-grain cuts first to manage tear out. Small 1/4"x1/4" inserts to the rescue but what a PITA. I also made some setup gauges while I was at it. These were handy for router set up. The new version of my Jay Bates "Moxen Block" before final sanding. The keen-eyed will note one more lesson learned, which was cross-cutting at the router table will indeed pull ones work towards the fence in a subtle enough way that I don't notice it until too late. That moxon block is really neat. Tons of work holding options there! 2 Quote
Popular Post legenddc Posted October 15, 2025 Popular Post Report Posted October 15, 2025 Been up early the last two days for work. All day meetings aren’t fun when it’s in the UK and you’re in the US. Only one more day. Yesterday after work I brought my daughter to her dance class. During it I ran to my parent’s house and replaced their microwave door switches. $20 in parts fixed it. Been spending some time sanding and assembling cabinet door parts. Hoping to run them through my dads drum sander tomorrow if I can get a couple more done. 4 Quote
Popular Post Von Posted October 16, 2025 Popular Post Report Posted October 16, 2025 A few more adventures in Matchfit land prepping for the presentation to the club yesterday. The presentation went well, though I found it very hard to explain how things work with just images and words. If I do something similar again, I will consider videos. We hold the meeting in a library, so no sawdust-generating demonstrations and we only have what we bring in with us in terms of tools. A few in the group were familar with Matchfit but most weren't and seemed genuinely interested. I made an L-fence for my vertical fence jig as I ran into the limit of only being able to go as high as my table saw fence with my current L-fence a few times. This "mini-table" is an experiment in making my Jawstand more versatile. I was able to use it for gluing up my L-fence, so it has found one use so far (besides as a small horizontal stuff gathering surface). 8 Quote
fcschoenthal Posted October 16, 2025 Report Posted October 16, 2025 On 10/16/2025 at 3:14 PM, Von said: I ran into the limit of only being able to go as high as my table saw fence with my current L-fence a few times. In what situation would you run into a problem of your L-fence needing to be that high? It only needs to be as high as your blade. I'm guessing that your fence is short and you only want to make one vertical fence for multiple uses. Quote
Popular Post Von Posted October 16, 2025 Popular Post Report Posted October 16, 2025 On 10/16/2025 at 4:27 PM, fcschoenthal said: In what situation would you run into a problem of your L-fence needing to be that high? I laminated three pieces of thick (~1.5") oak together to make a big block. My usual routine is to cut one piece of the laminate sandwich to size and leave the other pieces oversized, do a glue up and then use the L-fence against the cut piece to trim the oversized ones. With 3/4" thick pieces, this works fine. I put the cut piece on the outside of the laminate and the cut edge is ~2" off my table top surface. I set my blade at about ~1.5" and the L-fence a little higher. I tried doing that with the three thicker pieces and when I went to trim it, I had ~3" high of rough edge and my cut edge above that. My blade would have just barely made it through the oversized material (I thought that far ahead), but my fence wasn't high enough at about 3" to securely hold my L-fence above the top of the blade. The L-fence would have been over the top of the fence with no support behind it in a way I wasn't comfortable with. I ended up using a flush trim bit in a router to extend the cut edge down far enough I felt comfortable using the L-fence. What I should have done in retrospect is put the cut piece in the middle and then I could have made two passes, one to clear up each of the oversized boards in the laminate. I didn't think to take a picture at the time, but I could do a recreation if that doesn't make sense. 4 Quote
Popular Post Von Posted October 17, 2025 Popular Post Report Posted October 17, 2025 Storage for all my squares and square-like doohickeys. Should have done this years ago. 7 Quote
Popular Post Ron Swanson Jr. Posted October 17, 2025 Popular Post Report Posted October 17, 2025 On 10/17/2025 at 4:32 PM, Von said: Storage for all my squares and square-like doohickeys. Should have done this years ago. @Von couldn't agree more sir! They're probably pound for pound some of the most reached for tools in my shop and having them at arms length has paid dividends. 7 Quote
Popular Post gee-dub Posted October 19, 2025 Popular Post Report Posted October 19, 2025 Actually yesterday. Had some TurDuckEn. I don't know how the host made it but it was pretty darn good. Sounds bizarre like raspberry sherbet and Trix cereal but is just as surprisingly good. There are so many good places to eat across the country. One of ours out here on the left coast is King Taco. Been around since the late 60s. A mainstay at local and state fairs, ran a truck for a while and moved to brick and mortar . . . fortunately only a few miles from my house. Those of you who like "Mexican" food would recognize the flavor of Mexico City regional food here. The flavors of Mexico vary by region just as New York pizza has very little resemblance to Chicago pizza just as Gulf Coast Jambalaya doesn't have much to do with Canadian Coast huckleberries and Rainbow Trout. But I digress . . . as usual . . . Great food, good friends, gotta love it. 6 Quote
Coop Posted October 20, 2025 Report Posted October 20, 2025 I believe that three bird within a bird combo got its start as part of the Cajun cuisine and as close as I am to that great cooking, I’ve never tried it. Great idea for Thanksgiving! Thanks 1 Quote
Popular Post Von Posted October 20, 2025 Popular Post Report Posted October 20, 2025 It dawned on me that the bottom of any Matchfit doohicky can serve as clamp storage with the addition of some (extra) slots (I'm pretty sure I originally saw Jay Bates do this in some video). My block now looks a little odd, like it could be clamped down to stay in place during a hurricane, but I only expect the actually tighten the outer two. The storage on the jawstand looks more natural. 4 Quote
Popular Post fcschoenthal Posted October 20, 2025 Popular Post Report Posted October 20, 2025 On 10/17/2025 at 4:32 PM, Von said: Storage for all my squares and square-like doohickeys. Should have done this years ago. I made one over a year ago. It's right behind my bench and gets reached for daily. 7 Quote
Popular Post Coop Posted October 21, 2025 Popular Post Report Posted October 21, 2025 Very nice! Does that mean that if I built one, that I would have to put them back in place after I use them? 2 3 Quote
Popular Post fcschoenthal Posted October 21, 2025 Popular Post Report Posted October 21, 2025 On 10/20/2025 at 8:48 PM, Coop said: Very nice! Does that mean that if I built one, that I would have to put them back in place after I use them? I just put them back at the end of the day. It gives me a chance to see what's missing. Usually I find them in my pocket, bench, table saw, etc. I'm still looking for the one that's gone. 2 3 Quote
Popular Post gee-dub Posted October 21, 2025 Popular Post Report Posted October 21, 2025 On 10/20/2025 at 7:59 PM, fcschoenthal said: I just put them back at the end of the day. It gives me a chance to see what's missing. Having a place for things makes clean up after a session quick and easy. I sometimes fall into letting items pile up where I am using them. I will then catch myself wasting time trying to find 'something'. That will usually stop me for minute or two while i put things back in their place. The next time I need that 'something' it is right where I expect it to be. This seems kind of anal but it is really just a survival mechanism I have built in to my work methods. Its the same reason I wear a waist apron. When I need a tape measure, knife, or a pencil I just reach down and there it is. 4 Quote
Popular Post Dave H Posted October 21, 2025 Popular Post Report Posted October 21, 2025 This is what I did for my squares, I just glued and, brad nailed plywood strips and spacer blocks together and mounted it to my tool wall. And yes I'm always looking for a square when I need one 3 Quote
Popular Post legenddc Posted October 21, 2025 Popular Post Report Posted October 21, 2025 Yesterday was a good day here at our house. I was happy that I was successful in getting out computer working again and without losing any files. Then my wife got a job offer, my in-laws finally had an offer accepted on a house the like and then my brother's wife had a baby boy. On 10/21/2025 at 10:01 AM, gee-dub said: Its the same reason I wear a waist apron. When I need a tape measure, knife, or a pencil I just reach down and there it is. I got an apron last year for Christmas and it has been the absolute best thing for my productivity in the shop. I can now find my tape measure, wood pencil, mechanical pencil, a Sharpie and a 6" adjustable square. I clip my dust collector remote on it while I'm using that as well. On 10/17/2025 at 5:32 PM, Von said: Storage for all my squares and square-like doohickeys. Should have done this years ago. Love the layout of that. I think I need to do some shop reorganization once I finish the project I'm working on to keep things closer to where I use them. 4 Quote
Popular Post Tom King Posted October 21, 2025 Popular Post Report Posted October 21, 2025 That was quite a day!!! Finally some noticeable progress on the swimming area bottom. I washed the sand all day for a couple of days with the 3" water pump about a month ago that left all the detritus stirred up and what didn't wash up on shore to be carried away just rested back on top of the sand. Yesterday we had the first strong wind straight out of the West which sends waves straight onto the beach that wash up a lot of the mess. I got that up and hauled it away with the tractor. Little bit today seen in the tractor bucket. The dark spots are just thin layers of that but with a few more days this Fall and Winter of strong Westerly winds it should end up on the beach for me to get up. This has been a long process over several years and we're just now starting to be able to see the end of it. The sand is over three feet deep at the edge of the water. One picture is from the neighbors dock through my polarized sunglasses to cut the surface glare. I'll extend those landscaping 6x6's farther around the near side in the pictures, but we have been too busy with puppies for a couple of months now for me to do much else. 6 Quote
Popular Post gee-dub Posted October 22, 2025 Popular Post Report Posted October 22, 2025 Another intolerable sunset in SoCal . . . 7 Quote
Popular Post davewyo Posted October 22, 2025 Popular Post Report Posted October 22, 2025 Probably causes cancer. 3 Quote
Coop Posted October 23, 2025 Report Posted October 23, 2025 I can vouch that the noon till sunset does/did! 1 Quote
Popular Post Tom King Posted October 23, 2025 Popular Post Report Posted October 23, 2025 Took the current batch of two litters of puppies to the Vet today to get their exam and shot before going to their new homes. Our Vet and all the assistants always enjoy our visits as do the puppies. These will have new owners coming to get them from California, to Massachusetts, to Florida. 7 Quote
Popular Post Von Posted October 23, 2025 Popular Post Report Posted October 23, 2025 Freeze warnings here, so I moved everything water-based, plus a few things just in case, into the house. 3 Quote
Popular Post fcschoenthal Posted October 24, 2025 Popular Post Report Posted October 24, 2025 Well, not today, but this week. Made a set of kitchen items for a non-profit silent auction. I hate it when my wife volunteers me for things. 11 Quote
Beechwood Chip Posted October 24, 2025 Report Posted October 24, 2025 Nice work! How's the press used in the kitchen? 2 Quote
drzaius Posted October 24, 2025 Report Posted October 24, 2025 2 hours ago, Beechwood Chip said: Nice work! How's the press used in the kitchen? Looks like a tortilla press. 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.